Megger Mit1025 10 Kv Dc Insulation Resistance Tester Mit-1025

US $5,049.00

Toledo, Ohio, United States
Aug 31st

Open on mobile:
QR code

The Following Items Are Included: Megger MIT1025 10kV DC Insulation Resistance Tester (BC# -L/T*) Test Lead Set Medium Power Clips Large Power Clips Power Lead Product Information CD BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Megger MIT1025 10kV DC Insulation Resistance Tester The MIT1025 with all test modes including a ramp test plus advanced memory functions with recall to screen, RTC for time/date stamp of results and USB cable interface to PC / PowerDB Includes Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 1 YEAR WARRANTY Megger MIT1025 10 kV Insulation Resistance Tester Megger’s range of dc insulation testers, MIT515, MIT525, MIT1025 and MIT1525 are targeted at original equipment manufacturers and industrial companies. The top of the range MIT1525 performs insulation resistance tests up to 15 kV with a 30 T maximum resistance and an accuracy of ±5 % from 1 M up to 3 T. The MIT515 offers IR, DAR and PI functions but has no memory functionality. MIT525, MIT1025 and MIT1525 have a full suite of test modes as well as on-board memory and the ability to stream data / download data to a PC / laptop. Instrument productivity is a focus of the MIT range, which offers rapid charge batteries and operation from an ac source if the batteries are dead. Rapid charge batteries enable >60 minutes testing after a 30 minute charge. MIT1025: 10 kV IRT with all test modes including a ramp test plus advanced memory functions with recall to screen, RTC for time/date stamp of results and USB cable interface to PC / PowerDB Safety rating is not compromised on the MIT range with all terminals safety rated to CAT IV 600 V to 3000 m (5 kV, 10 kV) or CAT IV 1000 V to 3000 m (15 kV). A range of 5 kV and 10 kV test leads are available plus dedicated 15 kV test leads, which are double insulated with clips designed for 15 kV creepage paths. The 15 kV leads are supplied in a carry bag. Suitably rated HV gloves and other personal protection equipment are required to be worn when testing. The MIT range shares dual case design, which includes a tough outer case to protect the tester from knocks/drops and an inner fire retardant case. The IP rating is IP65 case closed eliminating moisture and dust ingress. An intuitive user interface ensures no lost time remembering how to use the tester. Simplicity of operation is achieved with two rotary switches and the large backlight display which enables multiple results to be shown simultaneously. A graphical Quick Start Guide is provided inside the lid to assist first time users. Five preset voltage ranges are provided in insulation test mode, plus a user settable lock voltage range. Preconfigured diagnostic tests include Polarization Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV) and Ramp Test. Test leads are double insulated (t) with clamps rated at 3 kV (t)equivalent to 6 kV single insulation for the medium clip leadset and 5 kV (t), equivalent to 10 kV single insulation for the large clip. The 15 kV leadset is insulated to 15 kV. APPLICATIONS The Insulation Resistance (IR) test is a quantitative test, which indicates the effectiveness of a product’s electrical insulation. Applications include cables, transformers, motors / generators, circuit breakers and bushings. Common insulation tests are the “spot test”, a 1 minute IR test and a 10 minute Polarisation Index (PI) test, where PI is the ratio R10min / R1minand is temperature independent. FEATURES AND BENEFITS Insulation resistance up to 30 T @ 15 kV, 20 T @ 10kV, 10 T @ 5 kV IR, Timed IR, DAR, PI, DD, SV and Ramp diagnostic tests High current – 3 mA short circuit current High noise immunity – 3 mA (5 kV and 10 kV) 6 mA (15 kV) of noise rejection Li-ion battery – up to 6 hrs continuous testing @ 5 kV with a 100M load, battery meets IEC 2133 Safety rating: CAT IV 600 V to 3000 m (5 kV, 10 kV) CAT IV 1000 V to 3000 m (15 kV) Large LCD with backlight Dedicated voltmeter function (30 V to 660 V) MIT515, MIT525 and MIT1025 safety rated at CAT IV 600 V (maintained to 3000 m altitude) Specifications: a.c. voltage (auto-ranging) 90-264 V rms, 47- 63 Hz 100 VA Battery Charge Time 2.5 hours deep discharge, 2 hours normal discharge Battery life 11.1 V, 5.2Ah Li-ion batteries, meet IEC 62133:2003, MIT1525 has2 battery packs 4.5 hours (typical) continuous testing at 10 kV with a 100 M load Test Voltage 500 V, 1000 V, 2500 V, 5000 V, 10000 V, VL Lock test voltage 100 VL to 1 kV in 10 V steps, 1 kV to 5 kV in 25 V steps, 5 kV to 15 kV in 25 V steps Test voltage accuracy +4%, -0%, ±10 V nominal test voltage at 1 G load (0°C to 30°C) Resistance range 10 k to 15 T @ 5 kV, 10 k to 20 T @ 10 kV, 10 k to 30 T @ 15 kV Accuracy 10 kV 5000 V 2500 V 1000 V 500 V ±5% from 1M to 2 T T 500 G 200 G 100 G ±20% from 1M to 20 T 10 T 5 T 2 T 1 T Guard terminal performance Guards out parallel leakage resistance down to 250 k with a maximum additional resistance error of 1% with a 100 M load Display analog: 100 k to 10 T Digital: 10 k to max. a above Short circuit / charge current 3 mA @ 5 kV, 10 kV, 15 kV Insulation test alarm: 100 k to 10 G Capacitor charge <5 s/F at 3 mA to 10 kV Capacitor discharge <250 ms/F to discharge from10000 V to 50 V Capacitance range With test voltage set above 500 V 10 nF to 25 F Capacitance measurement accuracy ±10% ±5 nF Current range 0.01 nA to 6 mA Current accuracy ±5% ±0.2 nA at all voltages (23 °C) Interference 3 mA from 960 V to 10 kV Voltmeter range 30 V to 660 V a.c. or d.c., 45Hz – 65Hz Voltmeter accuracy ±3%, ±3V Timer range Up to 99 minutes 59 seconds, 15 second minimum setting Memory capacity 5.5 hours logging @ 5 sec intervals Test modes IR, IR(t), DAR, PI, SV, DD, Ramp test Interface USB type B (device) Real time output 1 Hz output readings (V, I, R) ENVIRONMENTAL Maximum altitude 3000 m Operating temperature range -4 °F to +122 °F (-20 °C to +50 °C) Storage temperature range -13 °F to +149 °F (-25 °C to +65 °C) Humidity 90% RH non-condensing at 104 °F (40 °C) IP rating IP65 (lid closed), IP40 (lid open) Safety CAT IV 600 V to 3000 m altitude For full Megger MIT1025 Insulation Tester product specifications, please click here: Megger MIT1025 Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kit, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou. Inventory and Ecommerce Management

Condition:	Seller refurbished: The item has been restored to working order by the eBay seller or a third party. This means the item was inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See seller’s listing for full details. ...	Brand	Megger
Type	Earth Ground Resistance Meter
MPN	MIT1025
Model	MIT1025