Meinberg ED170MP GPS Satellite Disciplined Atomic Clock 10MHz Oscillator Antenna, US $620 – Picture 0

Meinberg ED170MP GPS Satellite Disciplined Atomic Clock 10MHz Oscillator Antenna, US $620 – Picture 1

Meinberg ED170MP GPS Satellite Disciplined Atomic Clock 10MHz Oscillator Antenna, US $620 – Picture 2

Meinberg ED170MP GPS Satellite Disciplined Atomic Clock 10MHz Oscillator Antenna, US $620 – Picture 3

Meinberg ED170MP GPS Satellite Disciplined Atomic Clock 10MHz Oscillator Antenna, US $620 – Picture 4

Meinberg Ed170mp Gps Satellite Disciplined Atomic Clock 10mhz Oscillator Antenna

US $620

Fairfax, Virginia, United States
Jan 29th

Open on mobile:
QR code

Rohde & Schwarz/Meinberg ED170MP GPS Satellite Disciplined Clock with Antenna Used, Very Good Condition Photos show the actual item for sale Got a Question? << Click for an instant answer on Pricing, Payments, Shipping, Warranty, Returns etc. Here's a lightly-used high-end German made laboratory type GPS time receiver with the hard-to-find matching antenna/downconverter unit. The ensemble has been tested and been found to lock to the GPS network of atomic clocks - see screenshots at the end of the listing taken during my testing. An OEM Meinberg antenna is included as shown. Note that as the antenna includes a proprietary down-converter circuit enabling long cable runs between antenna and receiver, but eliminating the option of using one of the generic 5V antennae you'll find available for sale on-line. To install the unit you will need to procure a downlead of the appropriate length. The connectors needed are N-Male at both ends. The unit ships with the IP address set to 192.168.1.88 and the password is set to the default value of "meinberg". These values can easily be changed using the Meinberg config utility via the process documented in the User Manual. Listing comprises the items shown in the images only. No unpictured hardware, cables, accessories or documents are included. Description The frequency locking of the master oscillator to the GPS system enables the module GPS170 to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The pulse generator of ED170 generates pulses per second and per minute. The pulses are synchronized to UTC second. Full details may be obtained from the User Manual Two serial interfaces are available for sending time strings. These ASCII telegrams include information regarding time, date and status of the GPS receiver. The module provides two inputs for measurement of asynchronous time events. These capture events can be read via a serial interface. A powerful and feature-rich software called GPSMON is available for configuration and monitoring of your Meinberg GPS receivers. Features • 2 time trigger inputs • Pulses per second and per minute • 2 RS232 interfaces • Integrated power supply (85 - 264VAC) • Four frequency outputs 10MHz, 3.0Vpp into 50 Ohm • Alarm relay output, changeover contact • Includes GPS antenna Specifications Type of receiver 6 channel GPS C/A-code receiver Type of antenna Remote powered GPS antenna/converter unit, up to 300m distance to antenna with RG58 and up to 700m distance with RG213 cable [cable not included] Control elements Configuration occurs by using the enclosed monitoring software, connected to the system via the serial interface COM0. Status info Fail-LED shows that the internal timing has not been synchronized or that a system error occurred Lock-LED shows that the calculation of the position has been achieved after reset Synchronization time Max. 1 minute in normal operation mode, approx. 12 minutes after a cold start (discharged buffer battery) Frequency outputs Four frequency outputs: 10MHz, 3.0Vpp into 50 Ohm, female BNC connectors Pulse outputs Four pulse outputs: 1PPS, 3.0Vpp into 50 Ohm, female BNC connectors Interface Two independent serial RS232-interfaces, menu configurable Data format of interfaces Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud Data format: 7N2, 7E1, 7E2, 8E1, 8N1, 8N2 Time telegram: Meinberg Standard-Telegram , SAT, Uni Erlangen (NTP), SPA, Sysplex, RACAL, NMEA0183 (RMC,GGA,ZDA), Meinberg GPS, COMPUTIME, ION oder Capture-Telegramm Physical dimensions 485mm x 45mm x 305mm Time-Trigger inputs Resolution: 100 nsec, triggered by falling TTL slope Time of trigger event readable via RS232-interface Antenna connector type-N connector Backup battery type When main power supply fails, hardware clock runs free on quartz basis, almanac data is stored in RAM Life time of lithium battery min. 10 years Supported Time String Formats Meinberg Standard Timestring, Uni Erlangen Timestring, SYSPLEX Timer, NMEA, Computime, ABB-SPA, SAT, Arbiter Firmware Flash-EPROM, bootstrap loader Power Supply Unit Standard PSU: 85 ... 264VAC, 47 ... 63Hz Several other power supply units (even for DC power supply) are available upon request. Form Factor 19'' aluminium case (1U) Schroff Multipac Protection IP20 Ambient temperature 0 ... 50°C / 32 ... 122°F Humidity Max. 85% Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Used, in good condition and fully working. The photos show the actual item for sale. No unpictured cables, accessories or documents are included.”