Miller Spectrum 375 X-TREME Plasma Cutter with XT30 Torch - 907529 Spectrum 375 X-TREME with XT30 Torch 30 Amps for 3/8 in. mild steel capacity, XT30 torch with ergonomic handle and flexible cable, Auto-Line and MVP Plugs make this 19 lb unit the most portable plasma cutting system in the market! Rated Cutting Capacity The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements. Auto-Line and MVP (multi-voltage plug) Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120 240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Millers multi-voltage plug (MVP) allows connection to 120 or 240 V receptacles without tools choose the plug that fits the receptacle and connect it to the power cord. Automatic Air Regulation The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance. Protective X-CASE Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plugs, consumable box, as well as gloves, eye protection, etc. XT30 Torch Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy. Auto-Refire Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal all automatically! No need for manual re-triggering which reduces user hand fatigue. Portability Portable in the shop or at the job site at 19 lb the shoulder strap allows the end user to easily move from location to location. Wind Tunnel Technology and Fan-On-Demand Wind Tunnel Technology - internal air flow that protects electrical components and PC boards from dirt, dust, debris greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit. Industrial Applications •Maintenance •Light Construction •Prototyping •Body Shops •Fabrication •HVAC Ductwork Process: Air Plasma Cutting Rated Output: 30 A at 92 VDC, 35% Duty Cycle Cutting Capability: Rated: 3/8 in. (9.5 mm) Sever: 5/8 in. (15.9 mm) Weight: With torch: 19 lb. (8.6 kg) Required Input Pressure/Flow: 5.0 SCFM (146 L/min.) at 90 PSI minimum (621 kPa) 120 PSI maximum (828 kPa) Comes Complete With: •XT30 hand-held torch with 12-ft. (3.7 m) cable •Heavy-duty work clamp with 12-ft. (3.7 m) cable •X-CASE provides protection in transport and storage •10-ft. (3 m) MVP power cord •MVP plugs 5-15P (120 V, 15 A), 6-50P (240 V, 50 A) •Shoulder strap •Consumables box with 2 electrodes, 2 tips, deflector, and air fitting Shipping Policies Payment Policies Contact Us About Us We suggest Priority Mail for lighter weight items under 4lbs and UPS for heavier items when shipping in the Unites States. WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. Tracking information will be sent once order has shipped. We strive to always have stock available for shipping, but from time to time stock-outs may occur. Some welders are not stock items and will be ordered from manufacturer when paid for. It usually takes only a few days to ship to you. We are open M-F 8-4 Eastern. Orders received over the weekend are processed on Monday and usually ship Monday or Tuesday. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by UPS ground, FedEx Ground, USPS First Class Mail or USPS Priority Mail, unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door. Additional charges for lift gates or special delivery are at your cost. Some are shipped direct from manufacturer. PLEASE CALL or send an Ebay message BEFORE RETURNING ANY ITEM. RETURNS are subject to a processing fee of up to 20%, plus original shipping charges unless we made an error. Please include a copy of the packing slip or original order. INTERNATIONAL BUYERS: ONLY ITEMS MARKED FOR SALE FOR INTERNATIONAL SALES WILL BE SOLD INTERNATIONALLY. WARRANTIES MAY NOT BE HONORED IN ALL COUNTRIES. BUYER SOLELY RESPONSIBLE FOR ALL IMPORT FEES AND DUTIES. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. PAYPAL USERS SUBJECT TO EXCHANGE FEE. Paypal is preferred payment method. BUYER SOLELY RESPONSIBLE FOR ALL IMPORT FEES AND DUTIES. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. PAYPAL USERS SUBJECT TO EXCHANGE FEE. Credit Card: Call 317-991-4360 , 8:00AM-4:00PM EST M-F to use all major credit cards. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. Address: 5701 Fortune Circle South, Ste G, Indianapolis, IN 46241 Phone: 317-991-4360 Hours: 8-4 Eastern Thanks for your interest in Netwelder. In business since 1968, our mission is to provide the best welding equipment and supplies at an affordable price. We've been selling online since 2003. We will be adding extra features over the next few months, so come back regularly. www.netwelder.com
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
