+ Post new Ad
Miller wireless hand remote and receiver 300430, US $700.00 – Picture 0
Miller wireless hand remote and receiver 300430, US $700.00 – Picture 1
Miller wireless hand remote and receiver 300430, US $700.00 – Picture 0
Miller wireless hand remote and receiver 300430, US $700.00 – Picture 1

Miller Wireless Hand Remote And Receiver 300430

US $700.00

  • Mission Viejo, California, United States
  • Mar 25th
Open on mobile:
QR code
The Miller Wireless Remote Hand Control (300430) improves safety be eliminating control cords and reducing potential tripping hazards. Improve your weld quality by easily adjusting your machine to optimize the parameters for different joint configurations, electrodes, and wire types and sizes. Improve your productivity; adjust your parameters up to 300 ft away from your welder without returning to the machine or calling for assistance. The easy-to-install receiver plugs directly into the 14-pin receptacle of compatible Miller machines and the control unit is easily programmable with any other Miller 14-pin wireless receiver. Smart Touch buttons increase or decrease machine parameters in 1% or 5% increments for quick and accurate adjustments. Multiple frequency sharing allows up to 20 systems to operate in a 90 ft radius with accuracy and precision, without delay, interference, or crosstalk. Digital meter display allows presetting percentages of machine output before welding and viewing amperage and voltage while welding. High-visibility color makes hand control easy to locate on the job site. The Wireless Remote Hand Control is recommended with the following Miller power sources: Maxstar 200/350/700 Dynasty Series Gold Star® Series CST 280 XMT Series Dimension Series CST 280 Rack XMT 304 and 350 Rack Trailblazer 275/302 Big Blue 300 Pro3 Miller Du-Op Big Blue 350 PipePro Big Blue 400 Eco Pro Note: If your machine is not listed, please contact us or Miller Electric to check compatibility (have the serial number of your machine for reference) Excludes Maxstar® 200 STR 2 Excludes XMT® 350 VS 3 Requires Wireless Antenna Kit #300 749
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Miller

Directions

Similar products from Other Tig Welding Equipment & Tools

Miller torch adapter style gas #9,17 part #195378

Miller torch adapter style gas #9,17 part #195378

  • Corunna, Michigan, United States
  • Mar 26th
15 pcs 10N23 1/16" TIG Torch welding collets WP17 18 26 Weld Craft?

15 pcs 10N23 1/16" TIG Torch welding collets WP17 18 26 Weld Craft?

  • Oxnard, California, United States
  • Mar 26th
New Weldcraft 105Z57 Tig Welding Adapter Power Cable Adapter Solid Brass

New Weldcraft 105Z57 Tig Welding Adapter Power Cable Adapter Solid Brass

  • Oxnard, California, United States
  • Mar 26th
Bernard 3500SS COOLER CHILLER Welding Welder Tig Laser DynaFlux Miller Lincoln

Bernard 3500SS COOLER CHILLER Welding Welder Tig Laser DynaFlux Miller Lincoln

  • Cleveland, Ohio, United States
  • Mar 26th
Ceramic Cup Lava Nozzles for Weldcraft Tig Torches WP-9 WP-20 WP-25 WP-9V

Ceramic Cup Lava Nozzles for Weldcraft Tig Torches WP-9 WP-20 WP-25 WP-9V

  • Longmont, Colorado, United States
  • Mar 26th
Ceramic Cup Lava Nozzles for Weldcraft Tig Torches WP-24 WP-24W

Ceramic Cup Lava Nozzles for Weldcraft Tig Torches WP-24 WP-24W

  • Longmont, Colorado, United States
  • Mar 26th
Weldcraft 53N59 53N60 Alumina Nozzles

Weldcraft 53N59 53N60 Alumina Nozzles

  • Longmont, Colorado, United States
  • Mar 26th
Tig Welding Collet, collet body, torch tip, mig tip

Tig Welding Collet, collet body, torch tip, mig tip

  • Herrin, Illinois, United States
  • Mar 26th
Titanium 6AL-4V Welding Rods, AMS 4954, .060 x 18", 1lb. 13 oz. 200+ Rods

Titanium 6AL-4V Welding Rods, AMS 4954, .060 x 18", 1lb. 13 oz. 200+ Rods

  • Tustin, California, United States
  • Mar 25th
Inconel 625 TIG Welding Filler Wire 10lbs. .035 X 36 ERNiCrMo-3 Techalloy

Inconel 625 TIG Welding Filler Wire 10lbs. .035 X 36 ERNiCrMo-3 Techalloy

  • Hughesville, Pennsylvania, United States
  • Mar 25th
ESAB Tig Pen

ESAB Tig Pen

  • Lonoke, Arkansas, United States
  • Mar 25th
Snapon TIG Welder

Snapon TIG Welder

  • Nashville, Tennessee, United States
  • Mar 25th
TIG Blending Rod - Pinnacle Alloys ER70S-2 1/8" X 36" (10 lbs)

TIG Blending Rod - Pinnacle Alloys ER70S-2 1/8" X 36" (10 lbs)

  • Liberty, Missouri, United States
  • Mar 25th
Miller Smith flashback arrestor no. H743

Miller Smith flashback arrestor no. H743

  • Phillipsburg, New Jersey, United States
  • Mar 25th
Miller TIG Torch Power Adapter - Solid 50mm DINSE 195378

Miller TIG Torch Power Adapter - Solid 50mm DINSE 195378

  • Montrose, Michigan, United States
  • Mar 25th
4x Short Back Cap for WP17 26 Tig Air Cooled Torche &18 Water Cooled Torches

4x Short Back Cap for WP17 26 Tig Air Cooled Torche &18 Water Cooled Torches

  • Shenzhen, China
  • Mar 25th
HUGE LOT of Argon Y fitting with valves, MIG welding, TIG welder, Western Argon

HUGE LOT of Argon Y fitting with valves, MIG welding, TIG welder, Western Argon

  • Oxnard, California, United States
  • Mar 25th
MILLER RCC -14 FINGERTIP REMOTE CONTROL # 151086-USED

MILLER RCC -14 FINGERTIP REMOTE CONTROL # 151086-USED

  • Rock Hill, South Carolina, United States
  • Mar 25th
LOT of Victor FM 157 CJ Medium Duty Flowmeter unknown Other Mig Tig Welding

LOT of Victor FM 157 CJ Medium Duty Flowmeter unknown Other Mig Tig Welding

  • Oxnard, California, United States
  • Mar 25th
Linde Heliarc250hf tig/stick welder

Linde Heliarc250hf tig/stick welder

  • Sargeant, Minnesota, United States
  • Mar 25th

People who viewed this item also vieved

RACCV -1-2-M14 CK 28' Rotary Amperage Contol for Miller 14 Pin Machines

RACCV -1-2-M14 CK 28' Rotary Amperage Contol for Miller 14 Pin Machines

  • Erie, Illinois, United States
  • Feb 17th
AMTCS-1-2-M14 28' Amptrak Clipper Amperage Contol for Miller 14 Pin Machines

AMTCS-1-2-M14 28' Amptrak Clipper Amperage Contol for Miller 14 Pin Machines

  • Erie, Illinois, United States
  • Feb 17th
Techniweld 1-101 Size 4 cutting tip - NEW FREE SHIPPING

Techniweld 1-101 Size 4 cutting tip - NEW FREE SHIPPING

  • Lithonia, Georgia, United States
  • Feb 17th
Tweco Fabricator TIG Torch Package & Accessories (12.5 Ft., 8 PIN) 17V W4013802

Tweco Fabricator TIG Torch Package & Accessories (12.5 Ft., 8 PIN) 17V W4013802

  • Miami, Florida, United States
  • Feb 17th
Lincoln Electric® Base Welded Assembly For Multi-Weld® 350 Welding System

Lincoln Electric® Base Welded Assembly For Multi-Weld® 350 Welding System

  • Chicago, Illinois, United States
  • Feb 17th
Anchor Q19 TIG Torch Cable Cover 22 ft 100-Q-19

Anchor Q19 TIG Torch Cable Cover 22 ft 100-Q-19

  • Miami, Florida, United States
  • Feb 17th
TIG TORCH CABLE COVER 22 FT NYL0N WITH ZIPPER.

TIG TORCH CABLE COVER 22 FT NYL0N WITH ZIPPER.

  • Lakeside-Marblehead, Ohio, United States
  • Feb 17th
Weldcraft WP-27B-25 500 AMPS Water Cooled Tig Torch Automation machine Torch

Weldcraft WP-27B-25 500 AMPS Water Cooled Tig Torch Automation machine Torch

  • Wooster, Ohio, United States
  • Feb 17th
Weldcote Metals Liquid Soldering Flux 16 Oz.

Weldcote Metals Liquid Soldering Flux 16 Oz.

  • Winona, Minnesota, United States
  • Feb 17th
Weldcote 94/6 SOLDER 1/8 X 1# SPOOL

Weldcote 94/6 SOLDER 1/8 X 1# SPOOL

  • Winona, Minnesota, United States
  • Feb 17th
NEW 5pcs TIG Welding Torch Collet Body 3.2*47mm 10N28 WP & PTA 17,18 & 26

NEW 5pcs TIG Welding Torch Collet Body 3.2*47mm 10N28 WP & PTA 17,18 & 26

  • Shen Zhen, China
  • Jun 8th
Hobart E6011 Stick Welding Electrodes 10# PPAK 4.54kg |770456| ::Brand New::

Hobart E6011 Stick Welding Electrodes 10# PPAK 4.54kg |770456| ::Brand New::

  • Brampton, Ontario, Canada
  • Jun 9th
NEW 5pcs TIG Welding Torch Collet Body 2.4*47mm 10N32 PTA WP17,18 & 26

NEW 5pcs TIG Welding Torch Collet Body 2.4*47mm 10N32 PTA WP17,18 & 26

  • Shen Zhen, China
  • Jun 10th
NEW 5pcs TIG Welding Torch Collet Body 1.6*47mm 10N31 PTA WP17,18 & 26

NEW 5pcs TIG Welding Torch Collet Body 1.6*47mm 10N31 PTA WP17,18 & 26

  • Shen Zhen, China
  • Jun 10th
10 PCS of 3/32"* 7",Gold WL15, 15% Lanthanated Tungsten Welding &TIG Electrodes

10 PCS of 3/32"* 7",Gold WL15, 15% Lanthanated Tungsten Welding &TIG Electrodes

  • ???, ???, China
  • Jun 11th
10 PCS of 3/32"* 7",Green WC,Tungsten Welding & TIG Electrodes .

10 PCS of 3/32"* 7",Green WC,Tungsten Welding & TIG Electrodes .

  • ???, ???, China
  • Jun 11th
10 PCS of 3/32"* 7",Gray WC20,2% Ceriated Tungsten Welding & TIG Electrodes .

10 PCS of 3/32"* 7",Gray WC20,2% Ceriated Tungsten Welding & TIG Electrodes .

  • ???, ???, China
  • Jun 12th
10 PCS of 1/8"* 7",Blue WL20, 2% Lanthanated Tungsten Welding & TIG Electrodes

10 PCS of 1/8"* 7",Blue WL20, 2% Lanthanated Tungsten Welding & TIG Electrodes

  • ???, ???, China
  • Jun 12th
10 PCS of 3/32"* 7",RED WT20, 2% Thoriated Tungsten Welding & TIG Electrodes

10 PCS of 3/32"* 7",RED WT20, 2% Thoriated Tungsten Welding & TIG Electrodes

  • ???, ???, China
  • Jun 12th
1/16" x 7" 1% Zirconiated Tungsten TIG Electrodes, box of 10 electrodes

1/16" x 7" 1% Zirconiated Tungsten TIG Electrodes, box of 10 electrodes

  • Madison, Connecticut, United States
  • Jun 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies