Mimaki Ujv-160 Hybrid Uv Led Printer Plotter

US $1700

Swansea, Massachusetts, United States
Jul 10th

Open on mobile:
QR code

Roll + Rigid = Flexibility With unlimited applications, UJV-160 provides an optimal solution to a variety of printing needs. From acrylic board, aluminum composite board, corrugated cardboard, pasteboard, PVC, synthetic paper to PET, print on the broadest range of substrates with just one single printer. UJV-160 employing UV LED curing technology offers highest productivity and expands your business opportunities. Compatible with rigid media up to 10mm thickness and 12kg UJV-160 prints not only on roll media but also on rigid media. Equipped with a feed and delivery table, it enables direct printing on rigid media up to 10 mm thickness and 12 kg. Compactly designed, the table can be folded when not needed thus allowing for a smooth changeover between roll and rigid media. *Print accuracy may vary depending on types and coating of media. Please test the media beforehand. Roll Media Car wrapping, Banner (Tyvek®), Banner (Transparent PET film), Backlit film (PET film), Printing with white ink on transparent PET film. Rigid Media Signboard (transparent acrylic board), Signboard (aluminium composite board), Pen holder (pasteboard), Box file (styrene board), Printing with white ink on corrugated cardboard, Large panel (styrene board) Various benefits resulting from advanced UV LED technology No drying time, no media deformation The new UV LED curing technology does not emit infrared rays thus enabling print on heat sensitive materials. UV LED curing with UV inks means instantaneous drying that eliminates post-printing drying time. This innovation leads to dramatic reduction of job turnaround time (from printing to processing) and increase in productivity. ECO-friendly UV LED curing technology UV LEDs have a longer lifetime and save about 50 % in energy in comparison with conventional UV printers employing halide lamps. Another environmental friendly aspect of UV LED technology is the fact that it does not emit short wave ultraviolet rays which generate ozone. Specifications UJV-160 Head On-demand Piezo head Print resolution 600 dpi, 1200 dpi Ink Type LH-100 UV ink (C/M/Y/K/W/CL) LF-140 UV ink (C/M/Y/K/Lc/Lm/W) LF-200 UV ink (C/M/Y/K/W) Capacity 1,200 ml (600 ml 2 cartridge)/color Maximum print width Roll: 1,610 mm (63.3 "), Rigid: 1,600 mm (63.0 ") Media Width 1,620 mm (63.7") Thickness Max. 10 mm (0.39") Weight Roll: less than 25 kg (55 lbs.) Rigid: less than 12 kg (26.4 lbs.) Roll diameter Inside: 2 inch, 3 inch / Outside: Less than 180 mm (7.1") Media cutting Manual cutting UV device Equipped with UV Light Emitting Diodes Media heater Pre / print heater Media take-up device Roll take-up device (Standard), inside / outside selectable Interface USB 2.0 Applicable standard VCCI class A, UL60950-1, FCCI class A, CE marking (EMC directive, low voltage directive), CB report, RoHS Power specifications AC 100 V – 120 V, 200 – 240 V ± 10 %, 50 – 60 Hz ± 1 Hz, less than 1.68 KVA Operational environments Temperature 15°C – 30°C Humidity 35 – 65 % Rh (No condensation) Dimensions (W x D x H) Main unit 3,300mm x780mm x 1,290mm (129.9" x 19.8" x 50.7") Main unit + media stand 3,300mm x 4,300mm x 1,290mm (129.9" x 169.3" x 50.7") (Main unit and table with support wire) Weight Main unit 260 kg (573 lbs.) Media table 50 kg (110 lbs) x 2 units *Inks would not be cured when printing speed is faster than that of draft mode. Some of the samples in this website are artificial renderings. Specifications, design and dimensions stated in this website may be subject to change without notice(for technical improvements, etc). The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations. Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors couldvary slightly from one unit to other unit due to slight individual differences.

“Powers up, head moves, appears to be working, may need printhead cleaning. Inks not included.”

MPN

Does Not Apply

Brand

Mimaki

Product

Plotter

Type