Minarik M1 DC Drive, US $71.00 – Picture 0

Minarik M1 DC Drive, US $71.00 – Picture 1

Minarik M1 DC Drive, US $71.00 – Picture 2

Minarik M1 DC Drive, US $71.00 – Picture 3

Minarik M1 DC Drive, US $71.00 – Picture 4

Minarik M1 Dc Drive

US $71.00

Douglasville, Georgia, United States
Jan 29th

Open on mobile:
QR code

Mounted on a gold chassis, the compact M1 has a smaller footprint than competitive units with the same current rating. In addition, setting the M1 for use with small horsepower motors (1/15 to 1HP) is easy with a jumper that is provided. When installed, the jumper sets the trimmer pot tuning ranges to a level appropriate for smaller motors. *The M1 has a programmable chip that sets the range for the acceleration, deceleration, current limit and IR compensation trimmer pots. The ranges can be pre-programmed by the factory to accommodate specific application requirements. With a custom program the trimmer pots can be eliminated if desired to prevent user adjustment The M1 has a safety feature not found on many other drives. After any motor stall, the M1 will ramp to the set speed following the acceleration setting instead of ramping up at an unsafe, uncontrolled rate.The compact size and additional features of the M1 make it an excellent choice for those looking for power and performance in a small package. Two Choices for Inhibit Connection: Remote Start/Stop Control with an Inhibit Plug or Simply Connect to Spade Terminals Programmable Trimmer Pot Ranges: Unique Application Requirements for Acceleration, Deceleration, Torque Limit and IR Compensation can be Programmed into a Chip without Expensive Hardware Changes Additional Features: Wider than Typical IR Comp Range for Finer Tuning, Wide Accel/Decel Range (0.5 to 26 secs), and Vibration Tested to 1G Accessories: Heatsink 223-0159. 201-0024 Inhibit Plug with 18" Leads, DLC600 Digital Closed Loop Controller, PCM4 Isolation Card Specifications for Minarik Drives M1 Item Number: M1 Brand: Minarik Drives Item Category: Drives Subcategory: DC Series: M1 Input VAC: 104 to 127 Volts AC Output Armature VDC: 0 to 90 Volts DC Max HP @ 90VDC Armature: 1 Horsepower Input Phase: 1 Max Armature Amps DC: 10 Amps Operator Controls: Built In Package: Chassis Temperature Range (F): 50 to 131 Degrees F Approvals: UL,cUL H x W x D (in.): 1.5 x 4.5 x 3 Net Weight: 12 OZ Gross Weight: 12 OZ

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Minarik
MPN	M1
Model	M1