Mini Circuits 10-1000MHz Level 13 Frequency Mixer LRMS-2MH-

show original title, US $3.99 – Picture 0

Mini Circuits 10-1000MHz Level 13 Frequency Mixer LRMS-2MH-

show original title, US $3.99 – Picture 1

Mini Circuits 10-1000MHz Level 13 Frequency Mixer LRMS-2MH-

show original title, US $3.99 – Picture 2

Mini Circuits 10-1000MHz Level 13 Frequency Mixer LRMS-2MH-

show original title, US $3.99 – Picture 3

Mini Circuits 10-1000mhz Level 13 Frequency Mixer Lrms-2mh- Show Original Title

US $3.99

Potomac, Maryland, United States
Apr 30th

Open on mobile:
QR code

This LOT is one each of New Mini Circuits Surface Mount Level 13 Frequency Mixer, Part Number: LRMS-2MH. I have PCB for this Mixer link below. General Spec for LRMS-2MH: LO/RF Frequency: 5MHz - 1000MHz IF Frequency: DC-1000MHz LO Driver Level: +13dBm Conversion Loss: 8.5dB (typ) mid-band LO-RF Isolation: 55dB (typ) for Low Band, 39dB (typ) for Mid Band, 22dB (typ) for Upper Band LO-IF Isolation: 55dB (typ) for Low Band, 30dB (typ) for Mid Band, 18dB (typ) for Upper Band Input P1: +9dBm Input IP3: +25dBm (at 1GHz, LO=+13dBm) Maximum Input Power (no damage): +23dBm Operation Temperature Range: -40C to +85C Surface Mount Package: Case Style QQQ130 (0.4"x0.31"x0.20") Detail Spec see Data Sheet at: http://www.minicircuits.com/pdfs/LRMS-2MH.pdf Test Data: http://www.minicircuits.com/pages/s-params/LRMS-2MH_VIEW.pdf Plots: http://www.minicircuits.com/pages/s-params/LRMS-2MH_GRAPHS.pdf Case QQQ130: http://www.minicircuits.com/case_styles/QQQ130.pdf Footprint: http://www.minicircuits.com/pcb/98-pl083.pdf Please note the following: Develop PCB designed below for ADE/JMS type can be used for LRMS-2MH with small modification: since the LRMS package is bigger (in length) than ADE, so you need to cut LMRS-2MH leads off by 0.05" on both side. (cut leads will not affect electrical performance). Not recommended for large quantity product, but for HAM hobby and low volume experiment, PCB for ADE/JMS will work fine with LMRS mixers. Also, the pin assignment for ADE and LRMS are different, but function for pin assignment are the same (ADE: LO=6, RF=3, IF=2, GND=1,4,5 and LRMS: LO=1. RF=4, IF=5, GND=2,3,6. Check data sheet for detail). http://cgi.ebay.com/Develop-PCB-Mini-Circuits-ADE-JMS-Mixer-Qty-4-/150202588411?pt=LH_DefaultDomain_0&hash=item22f8c59cfb#ht_500wt_1156 . , . .