Mini Usb Nano V3.0 Atmega328 5v Micro-controller Board For Arduino-compatible G8

US $160

  • HK, Hong Kong
  • May 30th
Features: The duino Nano is a small‚ complete‚ and breadboard-friendly board based on the ATmega328 (duino Nano 3.0) . It lacks only a DC power jack‚ and works with a Mini-B USB cable instead of a standard one. Power: The duino Nano can be powered via the Mini-B USB connection‚ 6-20V unregulated external power supply (pin 30)‚ or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The FTDI FT232RL chip on the Nano is only powered if the board is being powered over USB. As a result‚ when running on external (non-USB) power‚ the 3.3V output (which is supplied by the FTDI chip) is not available and the RX and TX LEDs will flicker if digital pins 0 or 1 are high. Specifications: Microcontroller:Atmel ATmega328 Operating Voltage (logic level):5 V Input Voltage (recommended):7-12 V Input Voltage (limits):6-20 V Digital I/O Pins:14 (of which 6 provide PWM output) Analog Input Pins:8 DC Current per I/O Pin:40 mA Flash Memory:32 KB (ATmega328) of which 2 KB used by bootloader SRAM:2 KB (ATmega328) EEPROM:1 KB (ATmega328) Clock Speed:16 MHz Dimensions: 42*17*8 mm Cable Length:about 235mm Net weight:22 g Package weight:32 g Color: blue(as the picture shows) Packing Content: 1 x Nano V3.0 ATmega328P 1 x Mini USB Cable

Directions

Similar products from Other Electronic Monitoring Devices & Assemblies

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies