+ Post new Ad
Mitsubishi boring bar C-SWL0504L / DJO453, US $417 – Picture 0
Mitsubishi boring bar C-SWL0504L / DJO453, US $417 – Picture 0

Mitsubishi Boring Bar C-swl0504l / Djo453

US $417

  • Sanford, North Carolina, United States
  • Jul 9th
Open on mobile:
QR code
Mitsubishi micro boring bar CSWL0504L with one insert new no box.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand mitsubishi
MPN C-SWL0504L
Type Boring Bar

Directions

Similar products from Other Tool Retention Items

2 Inch Bo Head R8 Shank Holder Bo Head Set with 1/2 Inch Indexable Bo Bars

2 Inch Bo Head R8 Shank Holder Bo Head Set with 1/2 Inch Indexable Bo Bars

  • Pennsylvania, United States
  • Jul 10th
7Pcs Bo Bar Holder +7Pcs Carbide Insert Lathe Turning Tools + 7Pcs Wrenches

7Pcs Bo Bar Holder +7Pcs Carbide Insert Lathe Turning Tools + 7Pcs Wrenches

  • Pennsylvania, United States
  • Jul 10th
12mm Shank Boring Bar Hard High Accuracy Lathe Hole Milling Tool Accessories

12mm Shank Boring Bar Hard High Accuracy Lathe Hole Milling Tool Accessories

  • Shenzhen, China
  • Jul 10th
1pc Spring Collet Sleeve Motor Steel for Lathe Shank Shaft Durable ER20-14mm

1pc Spring Collet Sleeve Motor Steel for Lathe Shank Shaft Durable ER20-14mm

  • Shenzhen, China
  • Jul 10th
Spring Collet Sleeve Holder Motor Carbon Steel for Shank Durable ER11-5mm

Spring Collet Sleeve Holder Motor Carbon Steel for Shank Durable ER11-5mm

  • Shenzhen, China
  • Jul 10th
DA100 COLLETS AND EXTENSION HOLDERS USED IN GOOD CONDITION,  STORAGE BASE INCL

DA100 COLLETS AND EXTENSION HOLDERS USED IN GOOD CONDITION,  STORAGE BASE INCL

  • North Granby, Connecticut, United States
  • Jul 9th
CARR LANE CLM-12-B - PACK OF 24, FLANGE BUSHING, NEW* #289264

CARR LANE CLM-12-B - PACK OF 24, FLANGE BUSHING, NEW* #289264

  • Clinton Township, Michigan, United States
  • Jul 9th
Packers Kromer 7230-6 Zero Gravity Tool Balancer Load Range 35.2-46.3 LBS 72306

Packers Kromer 7230-6 Zero Gravity Tool Balancer Load Range 35.2-46.3 LBS 72306

  • High Ridge, Missouri, United States
  • Jul 9th
AERO - .498 to.401 Shank Adapter - AIT99705

AERO - .498 to.401 Shank Adapter - AIT99705

  • Denver, Colorado, United States
  • Jul 9th
BRAND NEW KENNAMETAL KM2016NCMSS2216 ADAPTER

BRAND NEW KENNAMETAL KM2016NCMSS2216 ADAPTER

  • North Springfield, Vermont, United States
  • Jul 9th
Sumitomo Carbide Inserts QTY10 CNMG432EEX / CNMG120408N-EX AC610M (LOC1124B)

Sumitomo Carbide Inserts QTY10 CNMG432EEX / CNMG120408N-EX AC610M (LOC1124B)

  • Lansing, Michigan, United States
  • Jul 9th
Lathe Turning Wrench WNMG080404 Carbide Inserts Blade MWLNR2525M08 Stock

Lathe Turning Wrench WNMG080404 Carbide Inserts Blade MWLNR2525M08 Stock

  • suzhou, China
  • Jul 9th
Sumitomo Carbide Inserts QTY10 LPMX080308S04 AC350 (LOC1124B)

Sumitomo Carbide Inserts QTY10 LPMX080308S04 AC350 (LOC1124B)

  • Lansing, Michigan, United States
  • Jul 9th
Sumitomo Carbide INserts QTY10 CPMT2.51.51ESU / CPMT080204N-SU AC630M (LOC1124B)

Sumitomo Carbide INserts QTY10 CPMT2.51.51ESU / CPMT080204N-SU AC630M (LOC1124B)

  • Lansing, Michigan, United States
  • Jul 9th
(4) ERICKSON / KENNAMETAL SS050DA304681 DA300 Double Angle Collet Chucks

(4) ERICKSON / KENNAMETAL SS050DA304681 DA300 Double Angle Collet Chucks

  • Enfield, New Hampshire, United States
  • Jul 9th
Kennametal End Mill Chucks CAT 40 3/4" Set of 5

Kennametal End Mill Chucks CAT 40 3/4" Set of 5

  • Greenville, South Carolina, United States
  • Jul 9th
Weldon A65 BRS-3 1" Shell Mill Arbor: 1-3/8" Projection, R-8 R8 Shank, Used Good

Weldon A65 BRS-3 1" Shell Mill Arbor: 1-3/8" Projection, R-8 R8 Shank, Used Good

  • Lorain, Ohio, United States
  • Jul 9th
USED WARNER SWASEY SOLID MORSE TAPER SOCKET 1 1/2" x MT3 (M-1925)

USED WARNER SWASEY SOLID MORSE TAPER SOCKET 1 1/2" x MT3 (M-1925)

  • La Habra, California, United States
  • Jul 8th
UNIVERSAL ENG TOOL HOLDERS 3/4 X 4 1/2 "

UNIVERSAL ENG TOOL HOLDERS 3/4 X 4 1/2 "

  • El Monte, California, United States
  • Jul 8th
LOT OF BT30 TOOL HOLDERS RICHMILL OTHER JACOBS TAPER 1 2 & 3

LOT OF BT30 TOOL HOLDERS RICHMILL OTHER JACOBS TAPER 1 2 & 3

  • El Monte, California, United States
  • Jul 8th

People who viewed this item also vieved

PARLEC C40 50 EM 2, CAT 40 Toolholder, Used

PARLEC C40 50 EM 2, CAT 40 Toolholder, Used

  • West Babylon, New York, United States
  • Jan 30th
New REMANUFACTURED Reliance 0-54392-2 0543922 Driver Card

New REMANUFACTURED Reliance 0-54392-2 0543922 Driver Card

  • Leopolis, Wisconsin, United States
  • Jan 30th
NEW SANDVIK COROMANT VARILOCK 391.68-027 50 090 LOT C10955

NEW SANDVIK COROMANT VARILOCK 391.68-027 50 090 LOT C10955

  • Dayton, Ohio, United States
  • Jan 30th
DEVLIEG MICROBORE 050BA0-90TN2E BORING CARTRIDGE MORE LISTED LOT C8193

DEVLIEG MICROBORE 050BA0-90TN2E BORING CARTRIDGE MORE LISTED LOT C8193

  • Dayton, Ohio, United States
  • Jan 30th
BT40 Face mill 1/2 diameter.

BT40 Face mill 1/2 diameter.

  • Columbus, Indiana, United States
  • Jan 30th
BT40 face mill arbor .75 pilot.

BT40 face mill arbor .75 pilot.

  • Columbus, Indiana, United States
  • Jan 30th
NEW BROWNING 2012 1-15/16 TAPER LOCK 1-15/16 IN BUSHING B315172

NEW BROWNING 2012 1-15/16 TAPER LOCK 1-15/16 IN BUSHING B315172

  • Buffalo, New York, United States
  • Jan 30th
NEW BROWNING 2517 1-1/8 TAPER LOCK 1-1/8 IN BUSHING B315165

NEW BROWNING 2517 1-1/8 TAPER LOCK 1-1/8 IN BUSHING B315165

  • Buffalo, New York, United States
  • Jan 30th
Techniks CAT 40 ER 32 25K Dual Drive CNC Collet Chuck-BIG Plus, BIG Daishowa

Techniks CAT 40 ER 32 25K Dual Drive CNC Collet Chuck-BIG Plus, BIG Daishowa

  • Hamden, Connecticut, United States
  • Jan 30th
CAT 45 - CV 45 - BORING HEAD HOLDER - PRECISE CORP. - 327299 - GREAT CONDITION

CAT 45 - CV 45 - BORING HEAD HOLDER - PRECISE CORP. - 327299 - GREAT CONDITION

  • Ashland, Wisconsin, United States
  • Jan 30th
NICE JACOBS DRILL CHUCK MODEL 34-33 33 TAPER MOUNT 0-1/2" CAP.+ KEY

NICE JACOBS DRILL CHUCK MODEL 34-33 33 TAPER MOUNT 0-1/2" CAP.+ KEY

  • Swartz Creek, Michigan, United States
  • Jan 30th
90 degree drill chuck

90 degree drill chuck

  • Jefferson, Ohio, United States
  • Jan 30th
INDEXABLE -FACE MILL - SP3 ULTRA-MILL - UM-800-24-1A8,WITH CV50BSMC 250240, NOS

INDEXABLE -FACE MILL - SP3 ULTRA-MILL - UM-800-24-1A8,WITH CV50BSMC 250240, NOS

  • McKee, Kentucky, United States
  • Jan 30th
INDEXABLE - SP3 ULTRA-MILL UM-800-24-1A &// KENNAMETAL CCV50BSMC250240, MILLING

INDEXABLE - SP3 ULTRA-MILL UM-800-24-1A &// KENNAMETAL CCV50BSMC250240, MILLING

  • McKee, Kentucky, United States
  • Jan 30th
K12-463AH SUNNEN HONE MANDREL WITH ADAPTER .463" - 479" RANGE

K12-463AH SUNNEN HONE MANDREL WITH ADAPTER .463" - 479" RANGE

  • Cleveland, Ohio, United States
  • Jan 30th
MBC400A SUNNEN indicator

MBC400A SUNNEN indicator

  • Chatham, Ontario, Canada
  • Jan 30th
4 SMITH TOOL 242-TR28-S0001 TENSION & COMPRESSION QC TAP HOLDERS

4 SMITH TOOL 242-TR28-S0001 TENSION & COMPRESSION QC TAP HOLDERS

  • Euclid, Ohio, United States
  • Jan 30th
Parlec S37-80TA3 Tapping Head with 3/8 Shank

Parlec S37-80TA3 Tapping Head with 3/8 Shank

  • Hendersonville, Tennessee, United States
  • Jan 30th
IBAG Micro Line Spindle With Controls And Wiring 25MM OD 60,000 RPM HT25S100

IBAG Micro Line Spindle With Controls And Wiring 25MM OD 60,000 RPM HT25S100

  • Kokomo, Indiana, United States
  • Jan 30th
5/8" Tapered Spindle Left Hand Bench Grinder Buffer Arbor Policraft Tools LF

5/8" Tapered Spindle Left Hand Bench Grinder Buffer Arbor Policraft Tools LF

  • London, United Kingdom
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies