+ Post new Ad
Mitutoyo 178-561-02A Surftest SJ-210 Surface Roughness Tester, US $460 – Picture 0
Mitutoyo 178-561-02A Surftest SJ-210 Surface Roughness Tester, US $460 – Picture 0

Mitutoyo 178-561-02a Surftest Sj-210 Surface Roughness Tester

US $460

  • Cincinnati, Ohio, United States
  • Jun 17th
Open on mobile:
QR code
Up for sale we have a new open box Mitutoyo 178-561-02A Surftest SJ-210 Surface Roughness Tester. Box was opened to inspect contents.  Tester is in mint condition. Comes with original accessories and original packaging. Features: Small, lightweight and easy to use Up to 10 measurement conditions and one measured profile can be stored in the internal memory. Access to each feature can be password-protected, which prevents unintended operations and allows you to protect your settings. The display interface supports 16 languages, which can be freely switched. An alarm warns you when the cumulative measurement distance exceeds a preset limit. Quick-charge, long life battery performs approximately 1000 measurements on a full charge. Can display sectional calculation results and assessed profiles, load curves, and amplitude distribution curves. Complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994, JIS B0601-1982), VDA, ISO- 1997, and ANSI.  

Directions

Similar products from Multidetectors & Inspection Gauges

GSG Ring Gage 4.688-12 BUTT-2A GO P.D. 4.6324 4 5/8" Inside Dia USED

GSG Ring Gage 4.688-12 BUTT-2A GO P.D. 4.6324 4 5/8" Inside Dia USED

  • Knoxville, Tennessee, United States
  • Jun 18th
Starrett 159M Screw Pitch Gauge Metric

Starrett 159M Screw Pitch Gauge Metric

  • Knoxville, TN, United States
  • Jun 18th
Mitutoyo HDS-8"C Digital Height gauge 570-244

Mitutoyo HDS-8"C Digital Height gauge 570-244

  • Hudson, Florida, United States
  • Jun 18th
Dial Bore Gauge

Dial Bore Gauge

  • West Bend, Wisconsin, United States
  • Jun 18th
5/8-18 STI UNF Heli-Coil 3B Taperlock Thread Gage GoPd 0.6611 / HiPd 0.6646"

5/8-18 STI UNF Heli-Coil 3B Taperlock Thread Gage GoPd 0.6611 / HiPd 0.6646"

  • West Warwick, Rhode Island, United States
  • Jun 17th
HEMCO 13/16 (0.8125") - 20 UNEF 2B Go/NoGo Thread Gage PD. 0.7800 / 0.7857

HEMCO 13/16 (0.8125") - 20 UNEF 2B Go/NoGo Thread Gage PD. 0.7800 / 0.7857

  • West Warwick, Rhode Island, United States
  • Jun 17th
Besly 13/16"-20 UNEF Class 3B Thread Gage Go 0.7800 NoGo 0.7843

Besly 13/16"-20 UNEF Class 3B Thread Gage Go 0.7800 NoGo 0.7843

  • West Warwick, Rhode Island, United States
  • Jun 17th
Pratt & Whitney Ring Thread Gage 25/32 - 24 NS Go P.D. 0.7542"

Pratt & Whitney Ring Thread Gage 25/32 - 24 NS Go P.D. 0.7542"

  • West Warwick, Rhode Island, United States
  • Jun 17th
3/8-24 STI Heli-Coil 3B Taperlock Thread Gage GoPd 0.4020 / HiPd 0.4047

3/8-24 STI Heli-Coil 3B Taperlock Thread Gage GoPd 0.4020 / HiPd 0.4047

  • West Warwick, Rhode Island, United States
  • Jun 17th
VINTAGE SET LUFKIN NO. 77B RADIUS GAGE 9/32 TO 1/2 BY 32NDS CASE MACHINIST TOOLS

VINTAGE SET LUFKIN NO. 77B RADIUS GAGE 9/32 TO 1/2 BY 32NDS CASE MACHINIST TOOLS

  • West Covina, California, United States
  • Jun 17th
Rex Durometers Model 1600

Rex Durometers Model 1600

  • Orange, California, United States
  • Jun 17th
Mitutoyo No. 2412f No. 7300 Thickness Gauge .5" New

Mitutoyo No. 2412f No. 7300 Thickness Gauge .5" New

  • Port Lavaca, Texas, United States
  • Jun 17th
8 Telescoping Gages

8 Telescoping Gages

  • Cherry Hill, New Jersey, United States
  • Jun 17th
Mitutoyo No 2904 inspection gauge .001-1.000

Mitutoyo No 2904 inspection gauge .001-1.000

  • Baltimore, Maryland, United States
  • Jun 17th
3 Telescoping Gages

3 Telescoping Gages

  • Cherry Hill, New Jersey, United States
  • Jun 17th
Vermont Gage 361142010 1/2"-28 UNEF 2A Go Ring Gage

Vermont Gage 361142010 1/2"-28 UNEF 2A Go Ring Gage

  • US, United States
  • Jun 17th
Parallels - 11 Sets W/Tray (no Box)

Parallels - 11 Sets W/Tray (no Box)

  • West Haven, Connecticut, United States
  • Jun 17th
Starrett 6pc Telescoping Gage Set - S579HZ Machinist Gages

Starrett 6pc Telescoping Gage Set - S579HZ Machinist Gages

  • West Haven, Connecticut, United States
  • Jun 17th
Large Lot of Inspection Gage Gauge Straight Pins Plug Handles & Bushings GO NOGO

Large Lot of Inspection Gage Gauge Straight Pins Plug Handles & Bushings GO NOGO

  • Lorain, Ohio, United States
  • Jun 17th
Mahr 5400229 120mm T7W Intrch'Ble Tip w/ 3mm Steel Ball Probe Arm

Mahr 5400229 120mm T7W Intrch'Ble Tip w/ 3mm Steel Ball Probe Arm

  • North Charleston, South Carolina, United States
  • Jun 17th

People who viewed this item also vieved

Digital 3V-lithium calipers digital vernier caliper

Digital 3V-lithium calipers digital vernier caliper

  • Hightstown, New Jersey, United States
  • Jan 30th
Digital Triple button fast display calipers digital vernier caliper

Digital Triple button fast display calipers digital vernier caliper

  • Hightstown, New Jersey, United States
  • Jan 30th
OPTICAL COMPARATOR 14 inch DELTRONIC with QUADRACHEK 2000 DIGITALTAL READOUT

OPTICAL COMPARATOR 14 inch DELTRONIC with QUADRACHEK 2000 DIGITALTAL READOUT

  • Colorado Springs, Colorado, United States
  • Jan 30th
Renishaw PH10M CMM Motorized Probe Head Factory Rebuild with 6 Month Warranty

Renishaw PH10M CMM Motorized Probe Head Factory Rebuild with 6 Month Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
NEW 2-3/8 x 2-3/8 INCH PRECISION V-BLOCK & CLAMP 2 SET

NEW 2-3/8 x 2-3/8 INCH PRECISION V-BLOCK & CLAMP 2 SET

  • Columbus, Ohio, United States
  • Jan 30th
RARE VINTAGE ELLSTROM DEARBORN RECTANGULAR GAGE BLOCKS, NOT A COMPLETE SET

RARE VINTAGE ELLSTROM DEARBORN RECTANGULAR GAGE BLOCKS, NOT A COMPLETE SET

  • Mokena, Illinois, United States
  • Jan 30th
Federal BB1 .001" Dial Indicator

Federal BB1 .001" Dial Indicator

  • Seaman, Ohio, United States
  • Jan 30th
Starrett No.196 Test Indicator Set

Starrett No.196 Test Indicator Set

  • Birmingham, Alabama, United States
  • Jan 30th
USED GOOD MAGNETIC BASE INDICATOR STAND 2 POLE ADJUSTABLE SPLIT CLAMP KNOB

USED GOOD MAGNETIC BASE INDICATOR STAND 2 POLE ADJUSTABLE SPLIT CLAMP KNOB

  • Wellington, Ohio, United States
  • Jan 30th
USED GOOD MAGNETIC BASE INDICATOR STAND SINGLE SHORT ADJUSTABLE POLE

USED GOOD MAGNETIC BASE INDICATOR STAND SINGLE SHORT ADJUSTABLE POLE

  • Wellington, Ohio, United States
  • Jan 30th
Digital Micrometer: Cen-Tech Model 00895 0-1" x 0.0001"

Digital Micrometer: Cen-Tech Model 00895 0-1" x 0.0001"

  • Barrington, New Jersey, United States
  • Jan 30th
Mitutoyo 104-137 Micrometer

Mitutoyo 104-137 Micrometer

  • Joshua Tree, California, United States
  • Jan 30th
Mitutoyo 101952 lock screw retainer plate new machine shop inspection

Mitutoyo 101952 lock screw retainer plate new machine shop inspection

  • Warren, Michigan, United States
  • Jan 30th
Steelcraft Precision No 342 Ruler with decimal equivalents on back

Steelcraft Precision No 342 Ruler with decimal equivalents on back

  • Enfield, New Hampshire, United States
  • Jan 30th
Round Head Protractor 3-1/2 Inch - APM965

Round Head Protractor 3-1/2 Inch - APM965

  • Escondido, California, United States
  • Jan 30th
NO 17 Protractor lot of 7

NO 17 Protractor lot of 7

  • Sarasota, Florida, United States
  • Jan 30th
STARRETT Steel Edge - Model: 385-24 Blade Length: 24"

STARRETT Steel Edge - Model: 385-24 Blade Length: 24"

  • Flushing, New York, United States
  • Jan 30th
new FOWLER 52-513-024, Rigid Style 5R Certified Rule, 24"/600mm Measuring Ruler

new FOWLER 52-513-024, Rigid Style 5R Certified Rule, 24"/600mm Measuring Ruler

  • United States
  • Jan 30th
STARRETT 12" COMBINATION SQUARE SET , 4 PIECE

STARRETT 12" COMBINATION SQUARE SET , 4 PIECE

  • Montrose, Michigan, United States
  • Jan 30th
Brown & Sharpe 558 Square with wood case

Brown & Sharpe 558 Square with wood case

  • Canton, Georgia, United States
  • Jan 30th
QUADTECH GUARDIAN 1000 HIPOT TESTER INSTRUCTION MANUAL

QUADTECH GUARDIAN 1000 HIPOT TESTER INSTRUCTION MANUAL

  • Las Vegas, Nevada, United States
  • Jan 30th
The CHALLENGE Machinery Co SURFACE PLATE 24"x36" Precision Machining Tool

The CHALLENGE Machinery Co SURFACE PLATE 24"x36" Precision Machining Tool

  • Williamsburg, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies