+ Post new Ad
Mitutoyo 192-670-10 LCD Digimatic Height Gage, 0-12in 0-300mm, US $430 – Picture 0
Mitutoyo 192-670-10 LCD Digimatic Height Gage, 0-12in 0-300mm, US $430 – Picture 0

Mitutoyo 192-670-10 Lcd Digimatic Height Gage, 0-12in 0-300mm

US $430

  • San Diego, California, United States
  • Jun 25th
Open on mobile:
QR code
we bought this for field testing, basically we bought it, made a case for it as you can see from pic, but we never had a need for it in the field, as you can see from pic some packaging still unopen. it comes with custom rugged case.it is the 192 670 10 with all parts in pic. Digimatic Height Gage Series 192-Multi-Function Type with SPC Data Output Series 192 FEATURES Highly versatile multi-function type. Carbide-tipped long scriber is provided. Rigid construction ensures repeatable measurement. Coarse/fine feed switching. Bi-directional touch-signal probe is an optional accessory. It can quickly and accurately measure steps, inside width, and outside width. With SPC data output. Technical Data  Accuracy: Refer to the list of specifications. Resolution: 0.01mm or .0005"/0.01mm Display: LCD, 7-digit Max. response speed: 500mm/s Battery: SR44(1pc.), 938882 Battery life: Approx. 2000 hours under normal use Function Zero-setting, ABS/INC switching, Presetting, Two presets, Probe tip diameter compensation, -/+ switching, Power ON/OFF, Data hold,  Data output, inch/mm conversion (inch/mm models only)  Alarm: Low voltage, Counting value composition error Standard Scriber Provided Metric models: Carbide-tipped scriber (905200) and scriber clamp (05GZA033) Inch/Metric models: Carbide-tipped scriber (905201) and scriber clamp (901385) Optional Accessories 905338: SPC cable (40” / 1m)  905409: SPC cable (80” / 2m)  905691: SPC cable (L-shape, 40” / 1m)  905692: SPC cable (L-shape, 80” / 2m)  192-007: Bi-directional touch-signal probe (metric)  192-008: Bi-directional touch-signal probe (inch)  953638: Holding bar for test indicator (length: 50mm)  900209: Holding bar for test indicator (length: 100mm)  953639 Holding bar for test indicator (length: 2”)  900306: Holding bar for test indicator (length: 4”)  900321: Swivel clamp used with holding bar (metric)  900322: Swivel clamp used with holding bar (inch) 

Directions

Similar products from Multidetectors & Inspection Gauges

Starrett? Machinist Hardened Tool Makers 14" Surface Gage Gauge / 9.5" Scribe

Starrett? Machinist Hardened Tool Makers 14" Surface Gage Gauge / 9.5" Scribe

  • Stow, Massachusetts, United States
  • Jun 25th
Radius Gage Set No. L 300CX

Radius Gage Set No. L 300CX

  • Des Allemands, Louisiana, United States
  • Jun 25th
SPI small hole gauge set

SPI small hole gauge set

  • Phoenix, Arizona, United States
  • Jun 25th
MEYER GAGE CO.- M-4 MINUS PIN GAGE SET .626-.750 - MISSING 3 PINS SHIPS FREE

MEYER GAGE CO.- M-4 MINUS PIN GAGE SET .626-.750 - MISSING 3 PINS SHIPS FREE

  • Oxnard, California, United States
  • Jun 25th
Starrett No.S579 G set of four telescoping gages W/ Box Slightly used

Starrett No.S579 G set of four telescoping gages W/ Box Slightly used

  • Davison, Michigan, United States
  • Jun 25th
2 STARRETT USA TAPER GAUGES 269A & 269B .1 - 5" & .5 - 1"

2 STARRETT USA TAPER GAUGES 269A & 269B .1 - 5" & .5 - 1"

  • Clawson, Michigan, United States
  • Jun 25th
Lot of 4 Comtor Comtorgages Bore Gages 2.7600, 3.0050, 3.8000, 4.8780

Lot of 4 Comtor Comtorgages Bore Gages 2.7600, 3.0050, 3.8000, 4.8780

  • Bridgeview, Illinois, United States
  • Jun 25th
STANDARD DIAL BORE GAGE- 4 EXTENTIONS -SIZE 5(3 3/32-6 1/8" RANGE)X.0001"/GRAD

STANDARD DIAL BORE GAGE- 4 EXTENTIONS -SIZE 5(3 3/32-6 1/8" RANGE)X.0001"/GRAD

  • Bloomfield, Connecticut, United States
  • Jun 25th
Mitutoyo Radius Gage Set Stainless Steel Hardened 186-901 Machinist Tool

Mitutoyo Radius Gage Set Stainless Steel Hardened 186-901 Machinist Tool

  • San Diego, California, United States
  • Jun 25th
Vibrac Adjustable Height V-Block - EO27

Vibrac Adjustable Height V-Block - EO27

  • Bloomfield, Connecticut, United States
  • Jun 25th
Machinist 6Pc. Telescoping Gage Set

Machinist 6Pc. Telescoping Gage Set

  • Wheatland, Pennsylvania, United States
  • Jun 25th
Snap Gage, Geo. Scherr Co., Inc. #3 (Go/No-Go) Gauge adjustable 5/8" - 1", USA

Snap Gage, Geo. Scherr Co., Inc. #3 (Go/No-Go) Gauge adjustable 5/8" - 1", USA

  • Saunderstown, Rhode Island, United States
  • Jun 25th
MITUTOYO HEIGHT GAGE SCRIBER No. 900258 machinist tool #2*K

MITUTOYO HEIGHT GAGE SCRIBER No. 900258 machinist tool #2*K

  • Thomaston, Connecticut, United States
  • Jun 25th
UNIVERSAL SURFACE GAGE w 9" & 12" POSTS **MINT IN BOX** machinist tools *F

UNIVERSAL SURFACE GAGE w 9" & 12" POSTS **MINT IN BOX** machinist tools *F

  • Thomaston, Connecticut, United States
  • Jun 25th
HAGIWARA GAUGE HEAD E-DT-95-6B *NEW IN BAG*

HAGIWARA GAUGE HEAD E-DT-95-6B *NEW IN BAG*

  • Sterling Heights, Michigan, United States
  • Jun 25th
CEM DT-156 Pro Paint Coating Thickness Meter Gauge Auto F/NF Probe Tester 1250um

CEM DT-156 Pro Paint Coating Thickness Meter Gauge Auto F/NF Probe Tester 1250um

  • Indianapolis, Indiana, United States
  • Jun 25th
STARRETT No.185 DRILL & WIRE GAGE GAUGE CHART for MACHINE SCREW TAPS *18

STARRETT No.185 DRILL & WIRE GAGE GAUGE CHART for MACHINE SCREW TAPS *18

  • Thomaston, Connecticut, United States
  • Jun 25th
CJ Johansson Swedish Gage Co. 1-L split ball Bore Gage .355 - .835" read .0001

CJ Johansson Swedish Gage Co. 1-L split ball Bore Gage .355 - .835" read .0001

  • El Monte, California, United States
  • Jun 25th
Mitutoyo 500-171-20, CD-6"CSX Absolute Digimatic Caliper Tool

Mitutoyo 500-171-20, CD-6"CSX Absolute Digimatic Caliper Tool

  • Phoenix, Arizona, United States
  • Jun 25th
Meyer P-2 Plus .251 to .500 inches Steel Pin Gage Plug Set Wood Case

Meyer P-2 Plus .251 to .500 inches Steel Pin Gage Plug Set Wood Case

  • West Babylon, New York, United States
  • Jun 25th

People who viewed this item also vieved

mahr 6"thumb roller type digital calipers with hard padded case & info sheets 19

mahr 6"thumb roller type digital calipers with hard padded case & info sheets 19

  • Chesapeake, Virginia, United States
  • Jan 30th
Machinists Caliper, Lufkin Rule Co., USA

Machinists Caliper, Lufkin Rule Co., USA

  • Kissee Mills, Missouri, United States
  • Jan 30th
SOLARTRON AX/1/S SPRING PUSH GAUGING TRANSDUCERS

SOLARTRON AX/1/S SPRING PUSH GAUGING TRANSDUCERS

  • Noblesville, Indiana, United States
  • Jan 30th
Renishaw MI4 Optical Machine Interface

Renishaw MI4 Optical Machine Interface

  • Millstone Township, New Jersey, United States
  • Jan 30th
Starrett Steel Rectangular Gage Block, ASME Grade AS-1, 50 mm Length

Starrett Steel Rectangular Gage Block, ASME Grade AS-1, 50 mm Length

  • Campbell, California, United States
  • Jan 30th
Starrett Steel Rectangular Gage Block, ASME Grade AS-1, 100 mm Length

Starrett Steel Rectangular Gage Block, ASME Grade AS-1, 100 mm Length

  • Campbell, California, United States
  • Jan 30th
interrapid dial indicator

interrapid dial indicator

  • Farmington, Michigan, United States
  • Jan 30th
Granite Base Compaitor Stand with FEDLOCK Indicator with 2 Inch Travel

Granite Base Compaitor Stand with FEDLOCK Indicator with 2 Inch Travel

  • Bartlett, Illinois, United States
  • Jan 30th
Ullman Telescopic Megnetic Pick-Up Tool GM-2L 16lbs!

Ullman Telescopic Megnetic Pick-Up Tool GM-2L 16lbs!

  • Lawrenceburg, Indiana, United States
  • Jan 30th
STARRETT 657T W/MAGNETIC BASE W/ FLEX-O-POST ASSEMBLY MACHINEST TOOL 657

STARRETT 657T W/MAGNETIC BASE W/ FLEX-O-POST ASSEMBLY MACHINEST TOOL 657

  • Olathe, Kansas, United States
  • Jan 30th
STARRETT MICROMETER HEAD No. 463

STARRETT MICROMETER HEAD No. 463

  • Polebridge, Montana, United States
  • Jan 30th
STARRETT TUBULAR ID INSIDE MICROMETER SET NO 823AZ CASE & BOX

STARRETT TUBULAR ID INSIDE MICROMETER SET NO 823AZ CASE & BOX

  • Plymouth, Massachusetts, United States
  • Jan 30th
LOT OF ~ 2 ~ MIRROR 2" X 3-3/4" RECTANGULAR EXTEND UP TO 32" INSPECTION 7" LONG

LOT OF ~ 2 ~ MIRROR 2" X 3-3/4" RECTANGULAR EXTEND UP TO 32" INSPECTION 7" LONG

  • Shartlesville, Pennsylvania, United States
  • Jan 30th
Mitutoyo 368-268 .0002" 1.200-1.600" Holtest w/case Empty Box only

Mitutoyo 368-268 .0002" 1.200-1.600" Holtest w/case Empty Box only

  • Oregon, Ohio, United States
  • Jan 30th
Inclinometer Angle Gauge Meter Protractor Spirit Level 360° with Magnets Digital

Inclinometer Angle Gauge Meter Protractor Spirit Level 360° with Magnets Digital

  • default, default, Hong Kong
  • Jan 30th
Starrett C359BZ Precision Universal Bevel Vernier Protractor Through 360 Degree

Starrett C359BZ Precision Universal Bevel Vernier Protractor Through 360 Degree

  • Cleveland, Ohio, United States
  • Jan 30th
VINTAGE Brown & Sharpe Stainless Steel Rule Machinist 6" Tool #308

VINTAGE Brown & Sharpe Stainless Steel Rule Machinist 6" Tool #308

  • Midland, Texas, United States
  • Jan 30th
liquid Solid 0.1mm Accuracy 1MM-15MM Taper Gauge Feeler Gap Hole Measuring Tool

liquid Solid 0.1mm Accuracy 1MM-15MM Taper Gauge Feeler Gap Hole Measuring Tool

  • ???, ???, China
  • Jan 30th
6" WORKSHOP SQUARE, 13-627-5, 6" x 4", 0.0014" Squareness, Spring Steel, /50A/

6" WORKSHOP SQUARE, 13-627-5, 6" x 4", 0.0014" Squareness, Spring Steel, /50A/

  • Saint Louis, Missouri, United States
  • Jan 30th
USED COMBINATION SQUARE SET

USED COMBINATION SQUARE SET

  • San Bernardino, California, United States
  • Jan 30th
RAHN GRADE A INDUSTRIAL GRANITE TABLE 12' L X 6' W X 20'' THICK

RAHN GRADE A INDUSTRIAL GRANITE TABLE 12' L X 6' W X 20'' THICK

  • Cedarburg, Wisconsin, United States
  • Jan 30th
24" x 18" x 5" Granite Inspection Surface Plate Bench Table Top MP-21

24" x 18" x 5" Granite Inspection Surface Plate Bench Table Top MP-21

  • Fleetwood, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies