+ Post new Ad
Mitutoyo Absolute Digimatic Caliper 8" 0 - 200mm. 500-197-20 in box, US $120 – Picture 0
Mitutoyo Absolute Digimatic Caliper 8" 0 - 200mm. 500-197-20 in box, US $120 – Picture 0

Mitutoyo Absolute Digimatic Caliper 8" 0 - 200mm. 500-197-20 In Box

US $120

  • Bekasi, Indonesia
  • Oct 20th
Open on mobile:
QR code
 Mitutoyo Absolute Digimatic Caliper 8" 0 - 200mm. 500-197-20    OLD stock / New I checked with a raised seal protection and press On: direct digital numbers appears as shown in the picture. all manual book and the battery is still full because it is still new and has never been used.  SOLD AS IS With No Return         GOOD LUCK ON YOUR BIDDING!!! Mitutoyo Absolute Digimatic Caliper Mitutoyo Absolute Digimatic  Code No 500-197-20 Model No. CD-8" CS  Made in Japan Measuring range: 0 – 8” / 0 - 200 mm Resolution: 0.0005"/0.01mm Repeatability: 0.0005” /0.01mm Accuracy: +/-0.001” Display  LCD. Length standard: ABSOLUTE electrostatic capacitance type linear encoder. Origin-set, Zero-setting, inch/mm conversion. Alarm: Low voltage, Counting value composition error. The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point, which then holds for all future measurements, no matter how often the instrument is switched off. Incremental measurements can be made at any time without losing the origin setting. Excellence of this item • Automatic Power on When the jaw is moved • Automatically turns off when not in use for approximately 5 minutes • Can also turned on / off, by pressing the pushbutton ON / OFF • Count data is not lost if revived ********* Its very easy to use********* Caliper in plastic-wrap, spare-battery still stapled to instruction booklet, good condition ( such as picture )              Attention !!! Shipping : We will send to worldwide SOLD AS IS With No Return We will send this item to worldwide within 1-2 working days after full    payment is received. Import duties and taxes ( in your country / if there are )  are not included in the item price or shipping charges.These charges are the buyer responsibility. Shipping by EMS  International ( Express ) From Jakarta Indonesia To worldwide cost  approximately  US$ 37.00,  ( need  4 - 7 work days normally, and sometimes depended countries and areas  ). THANKS

Directions

Similar products from Calipers & Caliper Rools

Vintage MITUTOYO DIAL CALIPERS 505-637 Japan .001

Vintage MITUTOYO DIAL CALIPERS 505-637 Japan .001

  • Simi Valley, California, United States
  • Oct 21st
Used CALIPERS and DIVIDER US MADE STARRETT 274-6 Toolmakers' 6" EDP 51303 xx

Used CALIPERS and DIVIDER US MADE STARRETT 274-6 Toolmakers' 6" EDP 51303 xx

  • Irvine, California, United States
  • Oct 21st
New Teclock Dial Thickness Gauge 0.01 SM-124

New Teclock Dial Thickness Gauge 0.01 SM-124

  • San Antonio, Texas, United States
  • Oct 21st
L.S. Starrett No. 454 13" Caliper Gage Tool Machinery

L.S. Starrett No. 454 13" Caliper Gage Tool Machinery

  • San Tan Valley, Arizona, United States
  • Oct 21st
DIAL CALIPER 6" x 001 Grade, Manufactured By (Economy) ~ Very Nice Condition

DIAL CALIPER 6" x 001 Grade, Manufactured By (Economy) ~ Very Nice Condition

  • Suwanee, Georgia, United States
  • Oct 20th
Fowler 6" Dial Caliper

Fowler 6" Dial Caliper

  • Houston, Texas, United States
  • Oct 20th
Bestool-Kanon Caliper SM-7 - New

Bestool-Kanon Caliper SM-7 - New

  • Cypress, California, United States
  • Oct 20th
SPI Lot of Calipers and square with center finder

SPI Lot of Calipers and square with center finder

  • Walland, Tennessee, United States
  • Oct 20th
Starret 995A Univeral Precision Gage with fine Adjustment

Starret 995A Univeral Precision Gage with fine Adjustment

  • Canton, Georgia, United States
  • Oct 20th
Snap-on, Blue Point 0-6"/0.1/Rev. Dial Caliper

Snap-on, Blue Point 0-6"/0.1/Rev. Dial Caliper

  • Hamilton, Ohio, United States
  • Oct 20th
Mitutoyo Digimatic Digital Caliper Model500-351 CD-6"P

Mitutoyo Digimatic Digital Caliper Model500-351 CD-6"P

  • Tracy City, Tennessee, United States
  • Oct 19th
Starrett Dial Caliper 120A-6 Made in USA - New in Case

Starrett Dial Caliper 120A-6 Made in USA - New in Case

  • North Weymouth, Massachusetts, United States
  • Oct 19th
Pittsburgh 6"Dial Caliper 66541 Shockproof.001"Harbor Freight Tools 2008 New

Pittsburgh 6"Dial Caliper 66541 Shockproof.001"Harbor Freight Tools 2008 New

  • Kenosha, Wisconsin, United States
  • Oct 19th
Digital Caliper - Stainless Steel - Large LCD Screen - High Quality & Extreme...

Digital Caliper - Stainless Steel - Large LCD Screen - High Quality & Extreme...

  • US, United States
  • Oct 19th
Anytime Tools Dial Caliper 6" / 150mm DUAL Reading Scale METRIC SAE Standard ...

Anytime Tools Dial Caliper 6" / 150mm DUAL Reading Scale METRIC SAE Standard ...

  • US, United States
  • Oct 19th
AccuRemote Digital Electronic Magnetic Angle Gage Level / Protractor / Bevel ...

AccuRemote Digital Electronic Magnetic Angle Gage Level / Protractor / Bevel ...

  • US, United States
  • Oct 19th
Kanon Caliper

Kanon Caliper

  • Irving, Texas, United States
  • Oct 19th
iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / E...

iGaging ABSOLUTE ORIGIN 0-6" Digital Electronic Caliper - IP54 Protection / E...

  • US, United States
  • Oct 19th
Digital Caliper Water Resistant Fractions Large LCD Screen 6"/150mm Smooth-gl...

Digital Caliper Water Resistant Fractions Large LCD Screen 6"/150mm Smooth-gl...

  • US, United States
  • Oct 19th
Vintage NOS Fowler dial Swiss caliper new

Vintage NOS Fowler dial Swiss caliper new

  • USA, United States
  • Jun 24th

People who viewed this item also vieved

J&L AC-2430 Stage Vise For Optical Comparators

J&L AC-2430 Stage Vise For Optical Comparators

  • Dayton, Ohio, United States
  • Jan 30th
Faro Arm Silver 60" cube

Faro Arm Silver 60" cube

  • El Monte, California, United States
  • Jan 30th
MITUTOYO Gauage Block 611615-531 4B ASME 0/PD 5mm 5 mm Brand-New Sealed w/ COA

MITUTOYO Gauage Block 611615-531 4B ASME 0/PD 5mm 5 mm Brand-New Sealed w/ COA

  • Colorado Springs, Colorado, United States
  • Jan 30th
MITUTOYO Gauage Block 611165-23 Size .125in Grade FS 2 Brand-New Sealed w/ COA

MITUTOYO Gauage Block 611165-23 Size .125in Grade FS 2 Brand-New Sealed w/ COA

  • Colorado Springs, Colorado, United States
  • Jan 30th
Mitutoyo Plunge Indicators 2414-10 and 2416F

Mitutoyo Plunge Indicators 2414-10 and 2416F

  • Bay Village, Ohio, United States
  • Jan 30th
Accessories for Dial Test Indicator Test Stand

Accessories for Dial Test Indicator Test Stand

  • Bristol, Rhode Island, United States
  • Jan 30th
Coating Thickness Gauge - FNF Type, LCD Display

Coating Thickness Gauge - FNF Type, LCD Display

  • Los Angeles, California, United States
  • Jan 30th
MACHINIST TOOLS STARRETT 199Z 15 INCH MASTER PRECISION LEVEL IN ORIGINAL BOX

MACHINIST TOOLS STARRETT 199Z 15 INCH MASTER PRECISION LEVEL IN ORIGINAL BOX

  • Saint Louis, Missouri, United States
  • Jan 30th
Vintage Magnetic Gauge Stand

Vintage Magnetic Gauge Stand

  • Temperance, Michigan, United States
  • Jan 30th
CRAFTSMAN INDICATOR BASE NO. 40559

CRAFTSMAN INDICATOR BASE NO. 40559

  • Lincoln University, Pennsylvania, United States
  • Jan 30th
MITUTOYO 10-11 OUTSIDE MICROMETER .0001" MODEL No 103-225A EXCELLENT CONDITION

MITUTOYO 10-11 OUTSIDE MICROMETER .0001" MODEL No 103-225A EXCELLENT CONDITION

  • Buffalo, Minnesota, United States
  • Jan 30th
Mitutoyo 1"-2" .0001" Micrometer 101-114 Satin interior Chrome Ratchet

Mitutoyo 1"-2" .0001" Micrometer 101-114 Satin interior Chrome Ratchet

  • Lockport, New York, United States
  • Jan 30th
LOT of GO NO GO GAGES precision machinist measuting tools machine shop

LOT of GO NO GO GAGES precision machinist measuting tools machine shop

  • Milroy, Indiana, United States
  • Jan 30th
Mitutoyo Part #MP42902 Display

Mitutoyo Part #MP42902 Display

  • Des Plaines, Illinois, United States
  • Jan 30th
ULTRA SENSITIVE MACHINIST PRECISION LEVEL LATHE MEASURING SETUP TOOL#G7001

ULTRA SENSITIVE MACHINIST PRECISION LEVEL LATHE MEASURING SETUP TOOL#G7001

  • Hong Kong, Hong Kong
  • Jan 30th
BRAND NEW DOUBLE BEVELLED MACHINIST SQUARE 100X160MM MEASURING SETUP TOOL #D72

BRAND NEW DOUBLE BEVELLED MACHINIST SQUARE 100X160MM MEASURING SETUP TOOL #D72

  • Hong Kong, Hong Kong
  • Jan 30th
NOS Moore & Wright UK ER424 Steel Machinists Rule 600mm (24 inch) Item No. K455

NOS Moore & Wright UK ER424 Steel Machinists Rule 600mm (24 inch) Item No. K455

  • Perth, Ontario, Canada
  • Jan 30th
NOS Moore & Wright UK ER312 Flexible Steel Machinists Rule 300mm #003B

NOS Moore & Wright UK ER312 Flexible Steel Machinists Rule 300mm #003B

  • Perth, Ontario, Canada
  • Jan 30th
Rare Starrett Protractor No. 12 Great Britain - Mint ..........(4-3-4)

Rare Starrett Protractor No. 12 Great Britain - Mint ..........(4-3-4)

  • San Antonio, Texas, United States
  • Jan 30th
Mitutoyo Rule/Combo Square No. 180-501A - 4R - 8th, 16th, 32nd, 64th ....(1-4-5)

Mitutoyo Rule/Combo Square No. 180-501A - 4R - 8th, 16th, 32nd, 64th ....(1-4-5)

  • San Antonio, Texas, United States
  • Jan 30th
Starrett granite surface plate table slab 129187

Starrett granite surface plate table slab 129187

  • Peoria, Illinois, United States
  • Jan 30th
Optical Flat 6"x 1" Surface Reference .000001"

Optical Flat 6"x 1" Surface Reference .000001"

  • Dracut, Massachusetts, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies