MKS SIMCO Ion Systems 775pvs Periodic Electrostatic/Ionizer Verification System, US $854.99 – Picture 0

MKS SIMCO Ion Systems 775pvs Periodic Electrostatic/Ionizer Verification System, US $854.99 – Picture 1

MKS SIMCO Ion Systems 775pvs Periodic Electrostatic/Ionizer Verification System, US $854.99 – Picture 2

MKS SIMCO Ion Systems 775pvs Periodic Electrostatic/Ionizer Verification System, US $854.99 – Picture 3

MKS SIMCO Ion Systems 775pvs Periodic Electrostatic/Ionizer Verification System, US $854.99 – Picture 4

MKS SIMCO Ion Systems 775pvs Periodic Electrostatic/Ionizer Verification System, US $854.99 – Picture 5

Mks Simco Ion Systems 775pvs Periodic Electrostatic/ionizer Verification System

US $854.99

Phoenix, Arizona, United States
Mar 4th

Open on mobile:
QR code

Click Here. Double your traffic. Get Vendio Gallery - Now FREE! MKS Instruments/SIMCO/Ion Systems 775PVS Periodic Electrostatic/Ionizer Verification System, PN: 91-0775PVS Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from MKS Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have. These units are used, old stock. Guaranteed to work for 30-days, parts and labor, excluding freight. The SIMCO Part Number is: 91-0775PVS. The Electrostatic Charger's Serial Number Tag Reads: Model Number: 775c Serial Number: 7413 Output: 1250 VDC nominal CE Marked: Yes The Fieldmeter's Serial Number Tag Reads: Model Number: 775 Serial Number: 4468 Analog Output: ±1 V = ±10 kV CE Marked: Yes Date: May, 1998 Link to the Datasheet: MKS 775PVS Periodic Verification System Datasheet Link to the Manual: MKS 775PVS Periodic Verification System Manual Description: The 775PVS Periodic Verification System is a hand-held alternative to a charged plate monitor. It consists of three components-a field meter, a detachable plate, and a charger-for measuring static charge and verifying ionizer performance. Used alone, the fieldmeter measures electrostatic fields on any surface. Ranging lights ensure accurate and repeatable measurements by enabling users to determine the exact distance at which the voltage reading is correct. A SAMPLE and HOLD function allows measurements in places difficult to reach with other instruments. Attach the plate and use the charger, and the Model 775PVS can be used to verify ionizer operation and check ion balance and discharge items. The unit is designed to take measurements that correspond to those made by a charged plate monitor following Ionization Standard ANSI EOS/ESD S3.1-2000 of the ESD Association. For increased accuracy, a conductive, impact-resistance case and flexible ground cord facility grounding. Features & Benefits: Digital display - Easy to read Distance ranging lights - Ensures accurate distancing and measurements Chopper circuit - Operates in an ionized environment NIST-traceable calibration (out of date) - Correlatable to a charged plate monitor Electrostatic Fieldmeter Specifications: Input: 9 VDC alkaline battery; battery life in excess of 40 hours Display: 3 1/2 digits, 0.4" (1 cm) digit height Output: Analog output through miniature jack, 1 V corresponds to 10 KV Response: 5 Hz at analog output, digital display updates 3 times per second Features: HOLD and LOW BATTERY indicators, automatic polarity Controls: On/off pushbutton, SAMPLE/HOLD pushbutton, ZERO control Range: ±0.00 to 19.99 KV at 1" (2.5 cm), high voltages may be measured if distance is greater than 1" (2.5 cm) Accuracy: ±5%, chopper stabilized (accuracy unaffected by air ionization), least significant digit of display indicates tens of volts Environment: Operates at 10 - 40 °C (50 - 104°F) and 0 - 85% RH (non-condensing) Ground: Ground through conductive case or snap fastener Dimensions: 4.2" L x 2.4" W x 0.9" D (10.7 cm x 6.1 cm x 2.3 cm) Weight: 5 oz. (142 g.) Certification: CE 775 Plate Assembly Specifications: Plate Capacity: 15 picofarads ±2 picofarads Calibration: Adjusting screw provided Range: 0 - 2 KV for either polarity, higher voltages may be measured Ground: Ground plate attaches to conductive case of 775 Fieldmeter Dimensions: 1.0" H x 3.0" W x 1.3" D (2.5 cm x 7.6 cm x 3.3 cm), supported on Teflon standoffs Weight: 2.5 oz. (71 g.) Certification: CE 775C Charger Specifications: Input: 9 VDC alkaline battery; battery life in excess of 20 hours continuous operation Output: 1300 VDC ±20% for each polarity, current limited to less than 1 microamp Power Indicator: Red LED Features: Calibration set screws, pushbutton on/off Output Contacts: Two stainless steel contact plates, output polarity depends on which plate is grounded Dimensions: 4.2" L x 2.4" W x 0.9" D (10.7 cm x 6.1 cm x 2.3 cm) Weight: 4 oz. (113 g.) Certification: CE For More Pictures Please Click the Following: Picture 2 - Fieldmeter, Close-Up Picture 3 - Charger, Close-Up Picture 4 - Plate, Close-Up Picture 5 - The Fieldmeter's Serial Number Tag Picture 6 - The Charger's Serial Number Tag For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $5.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 03/03/15 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

“These units are used, old stock. Guaranteed to work for 30-days, parts and labor, excluding freight. The SIMCO Part Number is: 91-0775PVS.”

Brand	Ion Systems
MPN	91-0775PVS
Model	775pvs