Mobile Network Operated Generator/engine/fire Fighting Pump Gsm Control Module

AU $300.00

Rowley Regis, United Kingdom
Jan 30th

Open on mobile:
QR code

AECM104FRSi Description (GSM powered version) The Model AECM104FRSi is a microprocessor operated Automatic Engine Control Module designed to automatically and manually start and stop the engine. It also has a GSM integrated switch which allows to control a generating set via mobile network. This automatic engine control module will indicate the operational status and fault conditions, automatically shut down the engine and indicate the start engine failure by a flashing "Start Fail" LED on the front panel. Other simultaneous faults are indicated by steady LED. Please note: almost each generator or engine has got specific electrical system. To be able to fit this control module swiftly you would have to be familiar with your engine and have at least some basic electrical knowledges. If you aren't sure please contact us before ordering, in 99% we can help! This control module can be fitted on "engine only" system, this will require some changes in its software and settings, particularly in cranking pattern and durations of each attempt. We do it all free of charge but please communicate before buying. For sending attachments, wiring diagrams please use our email: sales@gencontrol.co.uk We don't send our free SIM card abroad. If you live outside of UK please use your own SIM. Please make sure your SIM card is free from PIN code. Key Features Remote wired start and stop via terminal 1 Remote start and stop via mobile network. Your free SIM card comes together with your order (UK customers only). Spare SIM can be ordered here. Manual start and stop Low oil pressure shut down High engine temperature shut down Manual / Remote wired shut down by pressing emergency stop push button Over speed shut down Under speed shut down Self-regulated duration of each attempt All outputs are protected from overload by a self-resettable multi fuse Automatic pre-heat before start via glow plug (optional) Automatic load control (optional) Very low power consumption in stand-by mode (15mA max) All parameters are user configurable (prior to order!) manual Specification [default settings] DC Supply: generator battery 12Vdc - 24Vdc Max. Standby Current: 15 mA @ 12 V Alternator Input Range: 100-300 VAC max Under speed shutdown: @ 30 Hz [45Hz for USA and Canada] Over speed shutdown: @ 57 Hz [69Hz for USA and Canada] Number of attempts: 3 (user-configurable prior to order) Crank duration: 12 sec (user-configurable prior to order) Preheat time (if applicable): 10 sec (user-configurable prior to order) Load on time delay (if applicable): 60 sec (user-configurable prior to order) Load off time delay (if applicable): 60 sec (user-configurable prior to order) Hold-off timer set for: 7 sec (user-configurable prior to order) Starter relay output: 3A max Fuel solenoid output: 3A max Glow plug relay output: 3A max Load control relay output: 3A max Dimensions: 72 X 72 X 82mm Operating Temperature Range: -30 to +70°C. Operating Humidity Range: 20 - 80% (non-condensing) The AECM series modules have been designed for front panel mounting. The module is fitted into the 68X68mm cut-out with the fixing clips removed. These are then fitted from the rear. A pair of fixing clips comes with every control module we ship. Wiring Diagram In the box: 1 X AECM104FRSi GSM powered control module 1 X Brand new GiffGaff SIM card (it has to be activated and topped up by a user) 1 X User manual 2 X fixing clips 4 x 4 pin plug-in type green terminal blocks (female type) CONTACT: