Model No. 6 Gleason Combination Hand Rolling Bevel Gear Tester - 29270

US $17,500.00

Cincinnati, Ohio, United States
Aug 12th

Open on mobile:
QR code

Model No. 6 GLEASON Combination Hand Rolling #29270 and Power Angular Hypoid Bevel Gear Tester Serial No. 22043 Suitable for the testing of both the rolling qualities, and the tooth spacing and concentricity of bevel and hypoid gears of any shaft angle up to 7.5" (190.5mm) diameter EQUIPMENT / FEATURES: Standard two-speed, 2-HP/1-HP, 440 volt, 3-phase 50/60 cycle, 1800/3600 rpm drive motor w/pulleys & belts Two-speed drum switch Forward/reverse spindle rotation Manual braking system for load simulation Spring chucking mechanism (both spindles) (less/draw-rods & nuts) Standard 1-51/64” diameter pinion spindle bore (#12-Taper) Standard 1-51/64” diameter gear spindle bore (#12-Taper) Full complement of electrics (motors/controls) Guards, covers PRINCIPAL SPECIFICATIONS: Maximum diameter of gears 7.5" (190.5mm) Range of angles 0 to 180 degrees Range of pinion offset: (above center) 1-1/4" (31.49mm) Range of pinion offset: (below center) 1-1-4" (31.49mm) Max./Min. Distance pinion spindle center to nose of gear spindle 7"/0" (177.8/0mm) Max./Min. Distance gear spindle center to nose of pinion spindle 7"/1" (177.8/25.4mm) Diameter of spindle hole (large end) 1-51/64" (45.64mm) Taper of spindle per ft. 1/2" (12.7mm) Depth of taper 3" (76.2mm) Diameter of hole through 1-5/16" (33.337mm) Floor space required 37" x 42" (940x1067mm) Machine net weight 1,900 lbs. (863.6 kGs) PRICE: F.O.B. OUR WAREHOUSE $17,500.00 ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SALE

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

UPC

Does not apply