+ Post new Ad
MODERN MOLD & TOOL V BLOCK AND CLAMP SET, PRECISION GROUND, US $230 – Picture 0
MODERN MOLD & TOOL V BLOCK AND CLAMP SET, PRECISION GROUND, US $230 – Picture 0

Modern Mold & Tool V Block And Clamp Set, Precision Ground

US $230

  • North Springfield, Vermont, United States
  • Jan 30th
Open on mobile:
QR code
MODERN MOLD & TOOL V BLOCK AND CLAMP SET  PRECISION GROUND 5 TOTAL TAPPED HOLES, 3/8-16 BLOCK IS 1-7/8" X 2" LONG BASE LENGTH IS 3-1/2" V CAPACITY IS 1" MFG IN PITTSFIELD MA, USA GOOD CONDITION. PLEASE CALL KEN WITH QUESTIONS. WE ARE A FULL LINE MACHINE TOOL DISTRIBUTOR. 800-756-7283 #5799 3#  PLEASE CHECK OUT OUR EBAY STORE!!! WE SELL AND SHIP INTERNATIONALLY!!! PLEASE PAY WITH PAYPAL FOR FAST SHIPPING!! WE DO NOT ACCEPT PERSONAL/BUSINESS CHECKS AS PAYMENT. WE SHIP OUR ITEMS VIA UPS GROUND. WE WILL LEAVE POSITIVE FEEDBACK UPON RECEIPT OF PAYMENT, WE JUST ASK THAT YOU DO THE SAME FOR US. THANK YOU!! GOOD LUCK BIDDING!! We stand behind all the products that we sell. If you are not satisfied with the item you have purchased, please contact us BEFORE you leave feedback so we can work it out. If you post negative feedback before you contact us, the item is yours to keep. Thank you. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “GOOD CONDITION”

Directions

Similar products from Supporting Blocks & Sets

MACHINIST LATHE MILL Lot of MICRO SMALL Hold Down Blocks for Sherline

MACHINIST LATHE MILL Lot of MICRO SMALL Hold Down Blocks for Sherline

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Items Cutters Gears Parts Etc

MACHINIST LATHE MILL Lot of Machinist Items Cutters Gears Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of USA Made Step Blocks for Sherline Hold Down Set Up

MACHINIST LATHE MILL Lot of USA Made Step Blocks for Sherline Hold Down Set Up

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Machinist Lot of Parallel Hold Down Set Up Block s

MACHINIST LATHE MILL Machinist Lot of Parallel Hold Down Set Up Block s

  • Morris Plains, New Jersey, United States
  • Jan 30th
PARALLELS - 3 MATCHED SETS

PARALLELS - 3 MATCHED SETS

  • Fort Wayne, Indiana, United States
  • Jan 30th
GIBRATAR 52 Piece M12x1.75 12mm T Slot Step Block & Clamp Fixture Clamp Set 1V

GIBRATAR 52 Piece M12x1.75 12mm T Slot Step Block & Clamp Fixture Clamp Set 1V

  • Saint Louis, Missouri, United States
  • Jan 30th
Toolmaker Made V Vee Block Machinist Toolmaker Tool ..9

Toolmaker Made V Vee Block Machinist Toolmaker Tool ..9

  • East Canton, Ohio, United States
  • Jan 30th
Machinist V Block Tool Fixture w/ Clamp. Milling, Drilling, Holder (C-6 cond)

Machinist V Block Tool Fixture w/ Clamp. Milling, Drilling, Holder (C-6 cond)

  • Angola, New York, United States
  • Jan 30th
Eclipse V Blocks Made In England Machinist Tool

Eclipse V Blocks Made In England Machinist Tool

  • Debert, Nova Scotia, Canada
  • Jan 30th
SPi 98-446-8 10 Matched Pair 1/8" x 1/2" to 1-5/8" x 6" Thin Parallel Set 2J

SPi 98-446-8 10 Matched Pair 1/8" x 1/2" to 1-5/8" x 6" Thin Parallel Set 2J

  • Saint Louis, Missouri, United States
  • Jan 30th
MATCHED PAIR OF STARRETT V BLOCKS WITH CLAMPS, MODEL NO. 568

MATCHED PAIR OF STARRETT V BLOCKS WITH CLAMPS, MODEL NO. 568

  • North Springfield, Vermont, United States
  • Jan 30th
1" v-block set

1" v-block set

  • Bon Air, Alabama, United States
  • Jan 30th
Starrett V Blocks No.278

Starrett V Blocks No.278

  • Williamsburg, Ohio, United States
  • Jan 30th
Machinist Set Up/Parallel Blocks 2-Pcs Machine Steel

Machinist Set Up/Parallel Blocks 2-Pcs Machine Steel

  • Rome, New York, United States
  • Jan 30th
Two Pairs of Machinist Blocks

Two Pairs of Machinist Blocks

  • Boaz, Alabama, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Tools Punches Parts Etc

MACHINIST LATHE MILL Lot of Machinist Tools Punches Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
~ Machinist Blocks with Original Wooden Case ~

~ Machinist Blocks with Original Wooden Case ~

  • Franklin, Massachusetts, United States
  • Jan 30th
SET OF 6: 1-2-3 BLOCKS.

SET OF 6: 1-2-3 BLOCKS.

  • Louisville, Kentucky, United States
  • Jan 30th
GROUP OF VINTAGE STARRETT TOOLS 2 NO.54 HOLD DOWNS 2 RULES MACHINIST PARRALLELS

GROUP OF VINTAGE STARRETT TOOLS 2 NO.54 HOLD DOWNS 2 RULES MACHINIST PARRALLELS

  • Elgin, Illinois, United States
  • Jan 30th
2 VINTAGE MACHINIST PARRALLEL BLOCKS MARKED BOB ON BOTH SIDES 2 3/8'' 1 7/8''

2 VINTAGE MACHINIST PARRALLEL BLOCKS MARKED BOB ON BOTH SIDES 2 3/8'' 1 7/8''

  • Elgin, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .250 O.D. 3.371

USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .250 O.D. 3.371

  • Fairfield, Iowa, United States
  • May 25th
USED 5C EMERGENCY STEP COLLET I.D. .250 O.D. 3.367

USED 5C EMERGENCY STEP COLLET I.D. .250 O.D. 3.367

  • Fairfield, Iowa, United States
  • May 25th
USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .250 O.D. 2.747

USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .250 O.D. 2.747

  • Fairfield, Iowa, United States
  • May 25th
Machined Aluminum Plate 12" X 24" X 1" Perfectly Square. .994 Thick +/- .003

Machined Aluminum Plate 12" X 24" X 1" Perfectly Square. .994 Thick +/- .003

  • Milwaukee, Wisconsin, United States
  • May 25th
Cnc Machined Grid Aluminum Vacuum Table 24"X72"

Cnc Machined Grid Aluminum Vacuum Table 24"X72"

  • Milwaukee, Wisconsin, United States
  • May 25th
welding table

welding table

  • Van Nuys, California, United States
  • May 25th
Bowes M-2107 VERTICAL handle clamp Maximim Bar Travel $50 Each Or All 3 For $100

Bowes M-2107 VERTICAL handle clamp Maximim Bar Travel $50 Each Or All 3 For $100

  • Davenport, Iowa, United States
  • May 26th
J H WILLIAMS VULCAN NO. 2 HEAVY SERVICE C-CLAMP , LOT OF 2

J H WILLIAMS VULCAN NO. 2 HEAVY SERVICE C-CLAMP , LOT OF 2

  • Berlin, Connecticut, United States
  • May 26th
LOT OF KAKUTA SL150-SP TOGGLE CLAMPS

LOT OF KAKUTA SL150-SP TOGGLE CLAMPS

  • California, United States
  • May 26th
Kitagawa B-206 3 Jaw Hydraulic Chuck - New

Kitagawa B-206 3 Jaw Hydraulic Chuck - New

  • Media, Pennsylvania, United States
  • May 27th
10" CUSHMAN 3 JAW CNC LATHE CHUCK 20 670 10 A06A 2067010A06A

10" CUSHMAN 3 JAW CNC LATHE CHUCK 20 670 10 A06A 2067010A06A

  • Fort Wayne, Indiana, United States
  • May 27th
4-1/4" 3-JAW CHUCK WITH 5MT SHANK IMPORT STK 9284

4-1/4" 3-JAW CHUCK WITH 5MT SHANK IMPORT STK 9284

  • Wadley, Alabama, United States
  • May 27th
Pro Series HHIP HHIP 3900-2104 Pro-Series Angle Tight, Positive Lock Milling

Pro Series HHIP HHIP 3900-2104 Pro-Series Angle Tight, Positive Lock Milling

  • USA, United States
  • May 28th
Pro Series HHIP HHIP 3900-2102 Pro-Series Heavy Duty Milling Vise with Swivel

Pro Series HHIP HHIP 3900-2102 Pro-Series Heavy Duty Milling Vise with Swivel

  • USA, United States
  • May 28th
HHIP 3900-1735 Angle Drill Press Vise with Swivel Base, 3.5" Width x 3.5" Depth

HHIP 3900-1735 Angle Drill Press Vise with Swivel Base, 3.5" Width x 3.5" Depth

  • USA, United States
  • May 28th
#46 Lathe Mandrel Machinist Tool Center Wrk Metal Southbend Clausing Atlas Logan

#46 Lathe Mandrel Machinist Tool Center Wrk Metal Southbend Clausing Atlas Logan

  • Yorktown, Virginia, United States
  • May 28th
#47 Lathe Mandrel Machinist Tool Center Wrk Metal Southbend Clausing Atlas Logan

#47 Lathe Mandrel Machinist Tool Center Wrk Metal Southbend Clausing Atlas Logan

  • Yorktown, Virginia, United States
  • May 28th
4 MT Live Center Morse Taper Metal Lathe Machinist Tool Southbend Clausing Leblo

4 MT Live Center Morse Taper Metal Lathe Machinist Tool Southbend Clausing Leblo

  • Yorktown, Virginia, United States
  • May 28th
Parallel Set 4" x 1" Made in USA Matching Pair |LV3|

Parallel Set 4" x 1" Made in USA Matching Pair |LV3|

  • Saint Louis, Missouri, United States
  • Jun 4th
Fanuc Robotics MO-4467-670-15 Round Pin

Fanuc Robotics MO-4467-670-15 Round Pin

  • Peoria, Illinois, United States
  • Jun 4th
Fanuc Robotics MO-4467-800-148 Dimmond Locator Pin

Fanuc Robotics MO-4467-800-148 Dimmond Locator Pin

  • Peoria, Illinois, United States
  • Jun 4th
8" Bison Tailstock NEW Fits All Super Spacers

8" Bison Tailstock NEW Fits All Super Spacers

  • Columbus,Ohio, United States
  • Jun 8th
PALMGREN 8" ROTARY TABLE , NO. 86

PALMGREN 8" ROTARY TABLE , NO. 86

  • San Jose, California, United States
  • Jun 9th
8 " Palmgren Rotary Table

8 " Palmgren Rotary Table

  • Barrington, Illinois, United States
  • Jun 9th
"Grrrip-It!-1""X48"""

"Grrrip-It!-1""X48"""

  • Hickory Hills, Illinois, United States
  • Jun 11th
Art Impressions Die-Window Deco

Art Impressions Die-Window Deco

  • Hickory Hills, Illinois, United States
  • Jun 11th
"Reminisce Collection Kit 12""X12""-In The Kitchen"

"Reminisce Collection Kit 12""X12""-In The Kitchen"

  • Hickory Hills, Illinois, United States
  • Jun 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies