+ Post new Ad
Monarch Engine Lathe -- For Parts or Rebuild, US $2900 – Picture 0
Monarch Engine Lathe -- For Parts or Rebuild, US $2900 – Picture 0

Monarch Engine Lathe -- For Parts Or Rebuild

US $2900

  • Wilmington, Delaware, United States
  • May 26th
Open on mobile:
QR code
This machine is not in operating condition. It could be used as a parts machine. The head stock is in fair condition. The machine is partially disassembled.This item is available for pick up only in Wilmington DE. NO SHIPPING IS AVAILABLE! Buyer is responsible for removal of item. Approximate weight: 18,000 LBS. Contact us for further information. We have recently moved this piece of equipment outside of our facility as we needed the space. It has now been in the rain. While moving the item, it rolled over and broke multiple levers. Please note that the pictures attached to this item not entirely accurate since this roll over incident. We do not wish to misrepresent any item or fixture that we are selling. Please contact me at 215-407-7052. The price will remain the same though I will accept best offer. Many good used parts on this item still remain.

Directions

Similar products from Tools for Lathe Machines

~8~ LATHE DRIVE DOGS 1" - 4" VULCAN J.H. WILLIAMS GOOD CONDITION

~8~ LATHE DRIVE DOGS 1" - 4" VULCAN J.H. WILLIAMS GOOD CONDITION

  • Highland, New York, United States
  • May 26th
MIYANO COLLET NOSE W/HARDINGE B-30 INDEX COLLET

MIYANO COLLET NOSE W/HARDINGE B-30 INDEX COLLET

  • Highland, New York, United States
  • May 26th
ATLAS 10F 10 F LATHE HEADSTOCK BACK GEARS SPINDLE 1-1/2" 8 ***VGC***

ATLAS 10F 10 F LATHE HEADSTOCK BACK GEARS SPINDLE 1-1/2" 8 ***VGC***

  • Highland, New York, United States
  • May 26th
PALMGREN 400 LATHE CROSS SLIDE MILLING ATTACHMENT NICE CONDITION

PALMGREN 400 LATHE CROSS SLIDE MILLING ATTACHMENT NICE CONDITION

  • Highland, New York, United States
  • May 26th
1" SHANK TURRET LATHE TOOL HOLDERS ADJ KNEE TOOL + HAND RECESSING TOOL **VGC**

1" SHANK TURRET LATHE TOOL HOLDERS ADJ KNEE TOOL + HAND RECESSING TOOL **VGC**

  • Highland, New York, United States
  • May 26th
GEOMETRIC 1" DSA THREADING DIE HEAD + CHASERS 1" SHANK ***SUPERB***

GEOMETRIC 1" DSA THREADING DIE HEAD + CHASERS 1" SHANK ***SUPERB***

  • Highland, New York, United States
  • May 26th
~LARGE~ 6" CAPACITY LATHE DRIVE DOG

~LARGE~ 6" CAPACITY LATHE DRIVE DOG

  • Highland, New York, United States
  • May 26th
South Bend 13", 14 1/2", 16", & 16/24" Lathe Threading Dial

South Bend 13", 14 1/2", 16", & 16/24" Lathe Threading Dial

  • Matawan, New Jersey, United States
  • May 26th
VALENITE GTE LATHE TOOL HOLDER NEW 150-DC-143702 - T5-75190 - 12T9 1"dia x 7"L

VALENITE GTE LATHE TOOL HOLDER NEW 150-DC-143702 - T5-75190 - 12T9 1"dia x 7"L

  • Daytona Beach, Florida, United States
  • May 26th
Steelex M1094 6 Head Knurling Tool, 3/4 by 5-Inch

Steelex M1094 6 Head Knurling Tool, 3/4 by 5-Inch

  • USA, United States
  • May 26th
ENCO Lathe Milling Machine

ENCO Lathe Milling Machine

  • Phillipsburg, New Jersey, United States
  • May 26th
337-ZS Mazak Ball Screw 53378400700

337-ZS Mazak Ball Screw 53378400700

  • Arcade, New York, United States
  • May 26th
ATLAS OR CRAFTSMAN LATHE CROSS FEED AND COMPOUND HANDLES

ATLAS OR CRAFTSMAN LATHE CROSS FEED AND COMPOUND HANDLES

  • Otsego, Michigan, United States
  • May 26th
Milling Attachment for South Bend Lathe A102NK for 9 or 10K Lathes Nice!

Milling Attachment for South Bend Lathe A102NK for 9 or 10K Lathes Nice!

  • Chatsworth, California, United States
  • May 26th
J.H. WILLIAMS NO. S-51 Metal LATHE THREADING TOOL HOLDER

J.H. WILLIAMS NO. S-51 Metal LATHE THREADING TOOL HOLDER

  • Coloma, Wisconsin, United States
  • May 26th
HARDINGE SPLIT BED LATHE DRIVE PLATE FACEPLATE 1-5/8-10

HARDINGE SPLIT BED LATHE DRIVE PLATE FACEPLATE 1-5/8-10

  • Terryville, Connecticut, United States
  • May 26th
South Bend Lathe 13" Compound Rest Feed Nut PT95T1

South Bend Lathe 13" Compound Rest Feed Nut PT95T1

  • Berrien Springs, Michigan, United States
  • May 26th
Original Atlas 12" Lathe 719-001 Saddle 005-001 Apron VG Condition Lightly Used

Original Atlas 12" Lathe 719-001 Saddle 005-001 Apron VG Condition Lightly Used

  • Omaha, Nebraska, United States
  • May 26th
New!! Kennametal Lathe Tool Holder NER-162C

New!! Kennametal Lathe Tool Holder NER-162C

  • New Paris, Indiana, United States
  • May 26th
Logan 200 Lathe LA-110 Saddle

Logan 200 Lathe LA-110 Saddle

  • Fulton, Illinois, United States
  • May 25th

People who viewed this item also vieved

GEOMETRIC 11/32-20 PROJECTED CHASERS FOR 5/16" D, DS,DSA

GEOMETRIC 11/32-20 PROJECTED CHASERS FOR 5/16" D, DS,DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA, GROUND FROM SHARPENING

GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA, GROUND FROM SHARPENING

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA

GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
4-40 X 1 1/2D (.168") Phosphorous Bronze Free Running Inserts, 1185-04BN-0168

4-40 X 1 1/2D (.168") Phosphorous Bronze Free Running Inserts, 1185-04BN-0168

  • Abingdon, Maryland, United States
  • Jan 30th
4-40 X 2D (.224") Phosphorous Bronze Screw Lock Inserts, 3585-04BN-0224

4-40 X 2D (.224") Phosphorous Bronze Screw Lock Inserts, 3585-04BN-0224

  • Abingdon, Maryland, United States
  • Jan 30th
M8-1.25 X 2D Thread Inserts Helicoil- Recoil 25084 - Metric Thread Repair- 5 Pcs

M8-1.25 X 2D Thread Inserts Helicoil- Recoil 25084 - Metric Thread Repair- 5 Pcs

  • Wethersfield, Connecticut, United States
  • Jan 30th
NEW Dual 0.013 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

NEW Dual 0.013 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

  • Albion, New York, United States
  • Jan 30th
NEW Dual 0.007 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

NEW Dual 0.007 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

  • Albion, New York, United States
  • Jan 30th
Replace CRT in SODICK MARK XI with BRAND NEW LCD monitor 1-yr warranty

Replace CRT in SODICK MARK XI with BRAND NEW LCD monitor 1-yr warranty

  • Buffalo NY, United States
  • Jan 30th
1.5" Dia. Wallace HRB-1-1/2 PIPE BENDER, Misc. Tooling

1.5" Dia. Wallace HRB-1-1/2 PIPE BENDER, Misc. Tooling

  • Harrison, New Jersey, United States
  • Jan 30th
50 Ton 10" Strk Dake 908050-4 H-FRAME HYDRAULIC PRESS, Electric over Hydraulic O

50 Ton 10" Strk Dake 908050-4 H-FRAME HYDRAULIC PRESS, Electric over Hydraulic O

  • Harrison, New Jersey, United States
  • Jan 30th
20 Ton 12" Strk Denison FH20 20H C404FSD HYDRAULIC PRESS

20 Ton 12" Strk Denison FH20 20H C404FSD HYDRAULIC PRESS

  • Harrison, New Jersey, United States
  • Jan 30th
LIGHTLY USED!! SUNNEN #KKN-444A REPLACEMENT STROKER BELT FOR HONING MACHINES

LIGHTLY USED!! SUNNEN #KKN-444A REPLACEMENT STROKER BELT FOR HONING MACHINES

  • Chino, California, United States
  • Jan 30th
NEW!! SUNNEN #MBB-820 REPLACEMENT "V" DRIVE BELT FOR HONING MACHINES

NEW!! SUNNEN #MBB-820 REPLACEMENT "V" DRIVE BELT FOR HONING MACHINES

  • Chino, California, United States
  • Jan 30th
NEW!! SUNNEN #MBB-1830A REPLACEMENT MOTOR DRIVE BELT FOR (60Hz) HONING MACHINES

NEW!! SUNNEN #MBB-1830A REPLACEMENT MOTOR DRIVE BELT FOR (60Hz) HONING MACHINES

  • Chino, California, United States
  • Jan 30th
6" W 18" L Brown & Sharpe 618 VALUEMASTER SURFACE GRINDER, ROLLER BEARING Tbl, F

6" W 18" L Brown & Sharpe 618 VALUEMASTER SURFACE GRINDER, ROLLER BEARING Tbl, F

  • Harrison, New Jersey, United States
  • Jan 30th
K.O. Lee B6062 TOOL & CUTTER GRINDER, 1/8hp Mot Univ Work Hd, 1hp, coolant

K.O. Lee B6062 TOOL & CUTTER GRINDER, 1/8hp Mot Univ Work Hd, 1hp, coolant

  • Harrison, New Jersey, United States
  • Jan 30th
3.125" Dia. Rush 382 DRILL GRINDER, auto feed option, 1hp, 3450rpm, 3ph

3.125" Dia. Rush 382 DRILL GRINDER, auto feed option, 1hp, 3450rpm, 3ph

  • Harrison, New Jersey, United States
  • Jan 30th
STANDARD TOOL 3" x 1-3/4" x 1-1/4" BORE ROUGHING SHELL MILLING CUTTER END MILL

STANDARD TOOL 3" x 1-3/4" x 1-1/4" BORE ROUGHING SHELL MILLING CUTTER END MILL

  • Tallmadge, Ohio, United States
  • Jan 30th
Bridgeport Series 1 Boss 6/9 CNC R2E4 Milling Machine

Bridgeport Series 1 Boss 6/9 CNC R2E4 Milling Machine

  • Turtle Creek, Pennsylvania, United States
  • Jan 30th
Big Kaiser Angle Head MMTB50-AG90/HMC1.250-230

Big Kaiser Angle Head MMTB50-AG90/HMC1.250-230

  • Belvidere, Illinois, United States
  • Jan 30th
Martindale Electric Etcher

Martindale Electric Etcher

  • United States
  • Jan 30th
Okamoto 12” x 24” Surface Grinder

Okamoto 12” x 24” Surface Grinder

  • Watertown, Connecticut, United States
  • Jan 30th
Yale 3,000 Lb. Three Stage Narrow Width and Low Height Fork Lift-Good Condition

Yale 3,000 Lb. Three Stage Narrow Width and Low Height Fork Lift-Good Condition

  • Cave Spring, Georgia, United States
  • Jan 30th
ACRA Vertical (Metal) Band Saw, #KB-45; 18"; (324)

ACRA Vertical (Metal) Band Saw, #KB-45; 18"; (324)

  • Odessa, Florida, United States
  • Jan 30th
Kaltenbach automatic cold saw ( haas mazak okuma hardinge)

Kaltenbach automatic cold saw ( haas mazak okuma hardinge)

  • United States
  • Jan 30th
Scotchman Cold Saw

Scotchman Cold Saw

  • Salt Lake City, Utah, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies