US $99.00
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Primary Application(s) | Cavity Die Work, Finish Profiling, Keyway Production, Speciality Cutting |
| Flutes | 4 | ||
| Material | Carbide | ||
| Helix Angle | 30° Helix | ||
| End Type | Single End | ||
| Cutting Diameter | "1 | ||
| Brand | Monster Tool | ||
| Overall Length | 4" | ||
| Model | MILL MONSTER | ||
| Quantity | 1 | ||
| MPN | 206-001264 | ||
| Country/Region of Manufacture | United States |
Directions
Similar products from End Mills Router & Drill Bits
Garr Tool Carbide End Mill 5/16 x 4 x 1 1/4 Coated, 5FL, 52347 255MA
Lot Besly Bendix HS End Mills Qty. 4 Assorted Sizes New Old Stock
.035" Harvey Tool Carbide 3 Flute 8x Reach End Mill (N 925)
NEW BASSETT 3/8 BALL NOSE TWO FLUTE CARBIDE END MILL
NEW BASSETT 1/4" BALL NOSE TWO FLUTE SOLID CARBIDE END MILL
Lot 4 End Mills 2 Besly Bendix 2 Ski-Kut New Old Stock
.031" Harvey Tool Carbide 3 Flute Variable Helix w Radius End Mill (N 926)
HANITA 0.8mm x 4 x 4.5 x 50 END MILL
3/8" (.3750") CARBIDE 4 FLUTE ENDMILL, TiAlN COATED
Niagara 3/16 x 3/16 x 5/16 x 2 CARBIDE END MILL 3F
MONSTER TOOL 5/8" 3 FLUTE X 1 1/4" LOC ENDMILL UNCOATED GENERIC LABELING
.047" Radius .047" Pilot 2 Flute DE Corner Rounding Carbide End Mill TiCN USA
Lot Of 4 End Mills 2 Helex 1 Illinois Eclipse 1 Bendix New Old Stock
PROCUT 4 flute 1/2-inch square end cutters - lot of 6 NEW in box. Made in USA
15/16" Contour 360 Solid Carbide TiALN 4 Flute End Mill (N 861)
Accupro 01150655, 1/2" x 1/2" x 2" x 4", ZrN, Solid Carbide End Mill
1" Contour 360 Solid Carbide TiALN 5 Flute End Mill (N 862)
12 PCS YG1 4 FLUTE SOLID CARBIDE 1/8 DIAMETER END MILL X 1/2 LOC X 1-1/2 CNC BIT
100 PCS YG1 4 FLUTE SOLID CARBIDE 1/4 DIAMETER END MILL X 3/4 LOC X 2-1/2 BIT
Morse High speed steel # 1897 Single end End Mill 15/16" and 7/8" Shank 4 Flutes
People who viewed this item also vieved
Blair 13224 Double-End Spotweld Cutter (BLR13224) 1/4" Shank 3/8" Diameter
1/16" A 1/8 X 5 HSS KEYWAY BROACH NEW
MITSUBISHI CARBIDE INSERT TNMG333MA UE6020
CERATIP CARBIDE INSERT CNMG433PT CA5525
CERATIP KYOCERA SPG-633 T00825 Grade KS6000 Ceramic Insert
Sandvik S-TMN 331.1A PM248458 Ceramic Insert
NEW SPTM120L #8 32-56 TPI CARBIDE THREADING BAR END MILL MILLING CUTTING TOOL
WISS TIN SNIPS NO.A-9 LENGTH 12" VINTAGE SOLID FORGED STEEL BLUE HANDLE
Lot 1pcs Metric Right Hand Die M30x2.5 mm Dies Threading Tools
USED A-P USA #3 TAPER PIN REAMER HSS
#3/0 HIGH SPEED STEEL STRAIGHT FLUTE TAPER PIN REAMER
GED MN-10 10" Double Mitre Angle Metal Cutter Saw Foot-Pedal Plastic/Wood 480V
Kalamazoo Startrite 30-R-10 Band saw
#1 Center Drill Double End HSS Point Diameter 3/64" Body Dia 1/8" 4" Long NEW
#3 Center Drill Double End HSS Point Diameter 7/64" Body Dia 1/4" 6" Long NEW
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies