+ Post new Ad
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 0
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 1
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 2
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 3
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 4
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 0
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 1
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 2
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 3
MORSE 1314 STANDARD TAPER LENGTH DRILL, 25/32 DIAMETER, 6" FLUTE, HSS, 9-7/8", US $39.99 – Picture 4

Morse 1314 Standard Taper Length Drill, 25/32 Diameter, 6" Flute, Hss, 9-7/8"

US $39.99

  • Huntington Beach, California, United States
  • Jan 30th
Open on mobile:
QR code
Welcome!!! You are buying a Series 1314 - STANDARD TAPER LENGTH DRILL; 25/32 DIAMETER; 6 FLUTE LENGTH; 9-7/8 OVERALL LENGTH; STRAIGHT SHANK; HSS; 118 DEG POINT ANGLE; BLACK OXIDE; MADE IN USA. MFG SERIES: 1314 OVERALL LENGTH: 9-7/8 MATERIAL: HSS ORIGIN: MADE IN USA FINISH: BLACK OXIDE ANGLE: 118 DEG POINT ANGLE DIAMETER: 25/32 DECIMAL: 0.7813 FLUTE LENGTH: 6   Actual Weight - 1.0100     Taper length drills have approximately the same flute lengths and overall lengths as taper shank drills, for deeper hole drilling Shanks are the same diameter as the drill body Recommended for drilling a wide range of materials     Free Shipping!!!* *(Hawaii and Alaska please add wait for invoice and add $8) Buy with confidence, 100% Positive Feedback!!! Posted with eBay Mobile
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “They are new, however, they were put on a drill, but never used.”

Directions

Similar products from Solid Carbide Drill Bits

ISCAR Carbide Taper Length Drill Bit 8.90mm 140Deg 8xD TiALN Coolant Thru [1907]

ISCAR Carbide Taper Length Drill Bit 8.90mm 140Deg 8xD TiALN Coolant Thru [1907]

  • Saint Louis, Missouri, United States
  • Jan 30th
METAL REMOVAL Carbide Straight Drill 3mm 2FL 7/8" x 1-7/8" M43546 [1915]

METAL REMOVAL Carbide Straight Drill 3mm 2FL 7/8" x 1-7/8" M43546 [1915]

  • Saint Louis, Missouri, United States
  • Jan 30th
ACME Carbide Coolant Drill 7/32" 6XD 360E02188A21M USA <1905>

ACME Carbide Coolant Drill 7/32" 6XD 360E02188A21M USA <1905>

  • Saint Louis, Missouri, United States
  • Jan 30th
SUMITOMO Carbide Drills 4mm MDS040LHV W40032059 USA Qty 2 &lt;1883&gt;

SUMITOMO Carbide Drills 4mm MDS040LHV W40032059 USA Qty 2 <1883>

  • Saint Louis, Missouri, United States
  • Jan 30th
ACME Carbide Coolant Drill 9/64&#034; 6XD 360E01406A21M USA &lt;1905&gt;

ACME Carbide Coolant Drill 9/64" 6XD 360E01406A21M USA <1905>

  • Saint Louis, Missouri, United States
  • Jan 30th
SUMITOMO Carbide Drills 4mm MDS040LHV W40032059 USA Qty 3 &lt;1883&gt;

SUMITOMO Carbide Drills 4mm MDS040LHV W40032059 USA Qty 3 <1883>

  • Saint Louis, Missouri, United States
  • Jan 30th
GUHRING Carbide Jobber Drill Bit 7.80mm 140 Deg 5xD TiN 1183 Coolant Fed [1907]

GUHRING Carbide Jobber Drill Bit 7.80mm 140 Deg 5xD TiN 1183 Coolant Fed [1907]

  • Saint Louis, Missouri, United States
  • Jan 30th
M.A. FORD Carbide Twister Drills 4.2mm ALtima 2XDSR1654A Qty 2 &lt;1879&gt;

M.A. FORD Carbide Twister Drills 4.2mm ALtima 2XDSR1654A Qty 2 <1879>

  • Saint Louis, Missouri, United States
  • Jan 30th
SUMITOMO Carbide Drills 0.1406&#034; MDS1406SP W40026894 USA Qty 3 &lt;1882&gt;

SUMITOMO Carbide Drills 0.1406" MDS1406SP W40026894 USA Qty 3 <1882>

  • Saint Louis, Missouri, United States
  • Jan 30th
SUMITOMO Carbide Screw Machine Drill Bit &#034;G&#034; TiN 140 Deg MDS2610MP &lt;1899&gt;

SUMITOMO Carbide Screw Machine Drill Bit "G" TiN 140 Deg MDS2610MP <1899>

  • Saint Louis, Missouri, United States
  • Jan 30th
GI TOOL 139423 LETTER P .323&#034; SOLID CARBIDE DRILL JOBBER LENGTH MADE IN USA NEW

GI TOOL 139423 LETTER P .323" SOLID CARBIDE DRILL JOBBER LENGTH MADE IN USA NEW

  • Burbank, California, United States
  • Jan 30th
GI TOOL 139665 #12 WIRE (.1890) SOLID CARBIDE DRILL JOBBER LENGTH USA MADE

GI TOOL 139665 #12 WIRE (.1890) SOLID CARBIDE DRILL JOBBER LENGTH USA MADE

  • Burbank, California, United States
  • Jan 30th
GI TOOL 139478 LETTER U .368&#034; SOLID CARBIDE DRILL JOBBER LENGTH MADE IN USA NEW

GI TOOL 139478 LETTER U .368" SOLID CARBIDE DRILL JOBBER LENGTH MADE IN USA NEW

  • Burbank, California, United States
  • Jan 30th
50 MICRO 0.65mm (.0256&#034;) Printed Circuit Board Drills

50 MICRO 0.65mm (.0256") Printed Circuit Board Drills

  • Georgetown, Texas, United States
  • Jan 30th
1.5MM - 2.4MM HRC40 DRILLING SOLID CARBIDE DRILL (T/T 10x)

1.5MM - 2.4MM HRC40 DRILLING SOLID CARBIDE DRILL (T/T 10x)

  • --, Hong Kong
  • Jan 30th
4mm (.1575&#034;) 3XD (Stub) TiAlN Carbide Dream Drill 140°Split Point YG1 DH404040

4mm (.1575") 3XD (Stub) TiAlN Carbide Dream Drill 140°Split Point YG1 DH404040

  • Vernon Hills, Illinois, United States
  • Jan 30th
11/32&#034;(.3438&#034;) TiAlN Carbide Dream Drill 3XD(Short) 140°Split Point YG-1 0221ATF

11/32"(.3438") TiAlN Carbide Dream Drill 3XD(Short) 140°Split Point YG-1 0221ATF

  • Vernon Hills, Illinois, United States
  • Jan 30th
1 inch Carbide Endmill 4F SE-LG 2-1/4x 5 TIALN

1 inch Carbide Endmill 4F SE-LG 2-1/4x 5 TIALN

  • Windsor, Connecticut, United States
  • Jan 30th
Widia 4163257, TDS403AD9000, 9mm, TiALN Solid Carbide Drill Bit w/ Coolant Holes

Widia 4163257, TDS403AD9000, 9mm, TiALN Solid Carbide Drill Bit w/ Coolant Holes

  • Chillicothe, Missouri, United States
  • Jan 30th
1/16 4F SE Altin Carbide End Mill

1/16 4F SE Altin Carbide End Mill

  • Saint Ann, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

LOT OF 22 JARVIS COUNTERSINK WITH 1/4&#034;-28 SHANK .423 O.D. - 3/16&#034; DIA. PILOT

LOT OF 22 JARVIS COUNTERSINK WITH 1/4"-28 SHANK .423 O.D. - 3/16" DIA. PILOT

  • Middletown, Connecticut, United States
  • Mar 9th
INA KGNZ24OPPP OPEN LINEAR BEARING AND OPEN HOUSING 5225051 NOS

INA KGNZ24OPPP OPEN LINEAR BEARING AND OPEN HOUSING 5225051 NOS

  • Alpha, Ohio, United States
  • Mar 9th
PARKER 656506 HYDRAULIC GEAR PUMP D17 AA2 1/2&#034; SHAFT NOS

PARKER 656506 HYDRAULIC GEAR PUMP D17 AA2 1/2" SHAFT NOS

  • Alpha, Ohio, United States
  • Mar 9th
Putnam Hi-Speed Two Flute Drill Size 1/4&#034;

Putnam Hi-Speed Two Flute Drill Size 1/4"

  • Dahlonega, Georgia, United States
  • Mar 12th
Morse Cutting Tools - High Speed Steel Drill Size 3/8&#034;

Morse Cutting Tools - High Speed Steel Drill Size 3/8"

  • Dahlonega, Georgia, United States
  • Mar 12th
Morse Cutting Tools - High Speed Steel Drill Size 1/2&#034;

Morse Cutting Tools - High Speed Steel Drill Size 1/2"

  • Dahlonega, Georgia, United States
  • Mar 12th
Mitco, 19/64&#034; x OAL 10&#034; HS Long Body Drill NOS

Mitco, 19/64" x OAL 10" HS Long Body Drill NOS

  • Hopkinsville, Kentucky, United States
  • May 12th
2 - NEW HSS DRILL BITS 19/32&#034; Drilling Milling mill 1/2&#034; shank xtra length USA

2 - NEW HSS DRILL BITS 19/32" Drilling Milling mill 1/2" shank xtra length USA

  • British Columbia, Canada
  • May 13th
LONG HI SPEED SPIRAL DRILLS, LOT SIZE 13, DRILL SIZE 3/16 - .1875, 6&#034; LONG

LONG HI SPEED SPIRAL DRILLS, LOT SIZE 13, DRILL SIZE 3/16 - .1875, 6" LONG

  • Portland, Oregon, United States
  • May 13th
25/64 Carbide Tip Gun Drill Bit Coolant Fed 15&#034; Long Feeding Starcut Sales USA

25/64 Carbide Tip Gun Drill Bit Coolant Fed 15" Long Feeding Starcut Sales USA

  • Grand Rapids, Michigan, United States
  • Jun 11th
UNIMERCO OCERA SOLID CARBIDE COOLANT FED DRILL 17.5MM

UNIMERCO OCERA SOLID CARBIDE COOLANT FED DRILL 17.5MM

  • Cadiz, Kentucky, United States
  • Jun 12th
NEW SURPLUS WALTER WAUKESHA 12.00mm ROUGH BORE INSERT DRILL B3274-400020

NEW SURPLUS WALTER WAUKESHA 12.00mm ROUGH BORE INSERT DRILL B3274-400020

  • Fairfield, Iowa, United States
  • Jun 12th
Norseman Jobber Length HD Black Finish 12qty High Speed Twist Drills 3/16&#034; 01110

Norseman Jobber Length HD Black Finish 12qty High Speed Twist Drills 3/16" 01110

  • Basehor, Kansas, United States
  • Jun 22nd
RUSHMORE USA 450-403346 Solid Carbide Metric Jobbers Length Twist Drill

RUSHMORE USA 450-403346 Solid Carbide Metric Jobbers Length Twist Drill

  • Duncan, South Carolina, United States
  • Jun 23rd
NEW R10CO PRECISION 5/16 HCO BRONZE OXIDE DRILLS (6 PC) FREE SHIPPING!!!

NEW R10CO PRECISION 5/16 HCO BRONZE OXIDE DRILLS (6 PC) FREE SHIPPING!!!

  • Salt Lake City, Utah, United States
  • Jun 24th
45/64&#034; COBALT S.M. LENGTH DRILL, 3&#034; LOF, 4-3/4&#034; OAL, PTD M40CO

45/64" COBALT S.M. LENGTH DRILL, 3" LOF, 4-3/4" OAL, PTD M40CO

  • Glendale, Arizona, United States
  • May 26th
11/16&#034; COBALT S.M. LENGTH DRILL, 2-7/8&#034; LOF, 4-5/8&#034; OAL, PTD M40CO 46044

11/16" COBALT S.M. LENGTH DRILL, 2-7/8" LOF, 4-5/8" OAL, PTD M40CO 46044

  • Glendale, Arizona, United States
  • May 26th
1&#034; COBALT S.M. LENGTH DRILL, 4&#034; LOF, 6&#034; OAL, DORMER A232, 232972

1" COBALT S.M. LENGTH DRILL, 4" LOF, 6" OAL, DORMER A232, 232972

  • Glendale, Arizona, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies