Motor Bracket, Evaporator, Bohn, Larkin, Heathcraft, Peerless, 15" X 15" X 6"

US $36.84

Hartford, Wisconsin, United States
Aug 27th

Open on mobile:
QR code

Gregoriou Brothers Refrigeration Since 1979 Frosty-Freeze Motor Bracket, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 15" x 15" x 6" EVAPORATOR FAN Motor holding bracket USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. This is the bracket that holds the motor. The studs on this bracket do wear out so it will need replacement at some point. The mounting studs are all 10" on center and use 5/16" nuts and washers. The ring that holds the motor has a outside diameter of 3-3/4" and has many holes for holding the motor. The inside diameter of the ring is 2-3/8" Known to fit a Larkin Heathcraft Model LCE694BB. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. SID PART# 23104901 $EVAPORATOR FAN Motor holding bracket USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. This is the bracket that holds the motor. The studs on this bracket do wear out so it will need replacement at some point. The mounting studs are all 10" on center and use 5/16" nuts and washers. The ring that holds the motor has a outside diameter of 3-3/4" and has many holes for holding the motor. The inside diameter of the ring is 2-3/8" Known to fit a Larkin Heathcraft Model LCE694BB. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. SID PART# 23104901 Gregoriou Brothers Refrigeration Since 1979 Frosty-Freeze Motor Bracket, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 15" x 15" x 6" EVAPORATOR FAN Motor holding bracket USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. This is the bracket that holds the motor. The studs on this bracket do wear out so it will need replacement at some point. The mounting studs are all 10" on center and use 5/16" nuts and washers. The ring that holds the motor has a outside diameter of 3-3/4" and has many holes for holding the motor. The inside diameter of the ring is 2-3/8" Known to fit a Larkin Heathcraft Model LCE694BB. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. SID PART# 23104901 EVAPORATOR FAN Motor holding bracket USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. This is the bracket that holds the motor. The studs on this bracket do wear out so it will need replacement at some point. The mounting studs are all 10" on center and use 5/16" nuts and washers. The ring that holds the motor has a outside diameter of 3-3/4" and has many holes for holding the motor. The inside diameter of the ring is 2-3/8" Known to fit a Larkin Heathcraft Model LCE694BB. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. SID PART# 23104901

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	bracket motor
interlink	inter link
Modified Item	No
Country of Manufacture	United States
Country/Region of Manufacture	United States
Non-Domestic Product	No
Custom Bundle	No
MPN	23104901
LARKIN	HEATHCRAFT
Brand	BOHN
LEER	PEERLESS
UPC	DOES NOT APPLY