motor reversing contactor for sale, brand-new and used.

Here we have a great set of reversing contactor switches: The Hardinge Style (HC Chucker Clone) Reversing Contactor Switches! This were removed from a clone of a Hardinge HC Chucker, fully functioning! MAKE SURE TO READ ALL DETAILS BELOW - IT ONLY TAKES A MINUTE.

For Sale, a New, Vintage CUTLER HAMMER Single Phase Reversing Contactor C50AGR2A - AC Magnetic for motor with seperate windings Acquired as part of my Grandfathers estate - the item is new and never used - the box shows storage wear - comes with Instructions Per an Internet Search: CUTLER HAMMER - 2 Pole FULL VOLTAGE, REVERSING MAGNETIC CONTACTOR SIZE 00 120V AC COIL If you have any questions, please feel free to contact me US Shipping Only Please

Albright 48V DC intermittent, motor reversing solenoid contactor. The DC182 series of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks and airport tractors. They have double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity.

Albright 48V DC intermittent, motor reversing solenoid contactor. The DC182 series of contactors has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks and airport tractors. They have double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity.

This is for 1 NEW in the box Eaton brand contactor. type - DILM40, Cat # XTCE040D00T Item Number: XTCE040D00T Brand: Cutler Hammer, Div of Eaton Corp Item Category: Contactors Subcategory: AC Non-Reversing IEC

if (swfobject.hasFlashPlayerVersion('9.0.18')) {var headerFn = function() {var att = { data:'http://www.billboardspm.com/viewer/ViewerApplication.swf', width:'840', height:'280' }; var par = { flashvars:'docId=-4333588485430347023&docType=header', wmode:'transparent', allowScriptAccess:'always', align:'middle', scale:'noScale' }; var id = 'billboardsHeaderContent'; var myObject = swf

Shaper, tilting table, spindle, Orton 40 x 60", 7.5 HP, TESTED Very heavy duty older shaper with large table and tilting spindle in good working condition. We powered up the shaper and the motor and spindle sound good. The foot pedal stops the motor by briefly activating a reversing contactor to reverse the motor.

This is our new line of low cost - better than the competition - magnetic starters. These are available in this configuration up to 20 HP @ 480V; 10 HP @ 230V 3-phase; 5 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of low cost - better than the competition - magnetic starters. These are available in this configuration up to 20 HP @ 480V; 10 HP @ 230V 3-phase; 5 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

Schneider Electric / Square D TeSys® 3-Pole Reversing contactor has a full load inductive and resistive of 40/60 Amps. Coil has a voltage rating of 24 VDC at 50/60 Hz.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

This is our new line of LARGE FRAME low cost - better than the competition - magnetic starters. These are available in this configuration up to 50 HP @ 480V; 30 HP @ 208/230V 3-phase; 15 HP @ 230V 1-phase. Our motor starters use UL certified IEC type components.

New Heavy Duty 48 Volt 48V 200Amp Solenoid Albright SW182 type Reversing Contactor