+ Post new Ad
Motorized Fixture For Surface Grinder Uses 5C Collets, US $490 – Picture 0
Motorized Fixture For Surface Grinder Uses 5C Collets, US $490 – Picture 0

Motorized Fixture For Surface Grinder Uses 5c Collets

US $490

  • Phoenix, Arizona, United States
  • Jun 19th
Open on mobile:
QR code
I had this item checked out at a local machine shop and they informed me it is a purpose built precision grinding fixture used on a surface grinder, it rotates the part while the grinder does it's thing it is very solid and heavy, motor powers up and spins and is very quiet and slow. The machine uses 5C collets, there is one in the machine. There are some markings stamped into the base that read Marv-Las, something 1969 and a dept. number. I do not know anything else about the item but saw similar machines used for indexing and precesion grinding. Please check the pictures carefully and ask any questions before biding. One last detail, when I tested this item I let it run for three hours just to make sure the motor was OK and it worked perfectly, did not over heat. Please check the pictures and ask any questions you may have before bidding. We ship USPS unless asked otherwise. Shipping is actual cost, if calculator overcharges we will refund the overage. We combine shipping whenever possible. Have fun bidding and remember if you are unhappy with the item just return it for a refund. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Directions

Similar products from Fittings & Plates

1.5” x 32” x 16” Fixed Angle Plate Work Holding Fixture

1.5” x 32” x 16” Fixed Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 19th
Interstate 12" x 9" x 8" Cast Iron Partially Machined Slotted Angle Plate 001440

Interstate 12" x 9" x 8" Cast Iron Partially Machined Slotted Angle Plate 001440

  • Green Bay, Wisconsin, United States
  • Jun 19th
De-Sta-Co Model 8315 Pneumatic RH Swing Clamp 1.25" Total Stroke 89LbFt.

De-Sta-Co Model 8315 Pneumatic RH Swing Clamp 1.25" Total Stroke 89LbFt.

  • Middlebury, Indiana, United States
  • Jun 19th
KURT Milling Vise Swivel Base Mill 6" Vice

KURT Milling Vise Swivel Base Mill 6" Vice

  • Lake Forest, California, United States
  • Jun 19th
SUBURBAN TOOL, INC MACHINED UNIVERSAL RIGHT ANGLE URA060608

SUBURBAN TOOL, INC MACHINED UNIVERSAL RIGHT ANGLE URA060608

  • Midland, Texas, United States
  • Jun 19th
Suburban PAW060606 Machined Universal Right Angle Iron 6" x 6" x 6"

Suburban PAW060606 Machined Universal Right Angle Iron 6" x 6" x 6"

  • Midland, Texas, United States
  • Jun 19th
Interstate Slotted Angle Plate 8" x 6" x 5 Partially Machined 00145144 3Q

Interstate Slotted Angle Plate 8" x 6" x 5 Partially Machined 00145144 3Q

  • Saint Louis, Missouri, United States
  • Jun 19th
DEGREED ANGLE PLATE for TOOL & CUTTER GRINDER WORK HEAD fixture base

DEGREED ANGLE PLATE for TOOL & CUTTER GRINDER WORK HEAD fixture base

  • Milroy, Indiana, United States
  • Jun 19th
8"x9"x8" Set Up Machinist Angle Knee Block Cast Iron Machined W/ Slots & Holes

8"x9"x8" Set Up Machinist Angle Knee Block Cast Iron Machined W/ Slots & Holes

  • Middlebury, Indiana, United States
  • Jun 19th
HARDINGE 5C EXPANDING MANDREL 2" x 1-1/4" ABC TYPE MULTI STEP + NEW SOFT JAWS

HARDINGE 5C EXPANDING MANDREL 2" x 1-1/4" ABC TYPE MULTI STEP + NEW SOFT JAWS

  • Ellington, New York, United States
  • Jun 19th
12" face plate lathe D1-5 cam lock

12" face plate lathe D1-5 cam lock

  • Bloomington, California, United States
  • Jun 19th
Suburban Tool Collet Master Spin Index Fixture

Suburban Tool Collet Master Spin Index Fixture

  • Riverside, California, United States
  • Jun 19th
Yuasa News 5c Collet Indexer Vertical & Horizontal

Yuasa News 5c Collet Indexer Vertical & Horizontal

  • Matawan, New Jersey, United States
  • Jun 19th
Cushman 12" Super Spacer Indexer Vertical & Horizontal 4" Hole

Cushman 12" Super Spacer Indexer Vertical & Horizontal 4" Hole

  • Matawan, New Jersey, United States
  • Jun 19th
24” x 22” x 22” Slotted Angle Plate Work Holding Fixture

24” x 22” x 22” Slotted Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 17th
7” x 5” x 4” Slotted Angle Plate Work Holding Fixture

7” x 5” x 4” Slotted Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 17th
7” x 5” x 5” Slotted Angle Plate Work Holding Fixture

7” x 5” x 5” Slotted Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 17th
7” x 5” x 8” Slotted Angle Plate Work Holding Fixture

7” x 5” x 8” Slotted Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 17th
8” x 6” x 5” Slotted Angle Plate Work Holding Fixture

8” x 6” x 5” Slotted Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 17th
8” x 18” x 8” Slotted Angle Plate Work Holding Fixture

8” x 18” x 8” Slotted Angle Plate Work Holding Fixture

  • Euclid, Ohio, United States
  • Jun 17th

People who viewed this item also vieved

2 Taft Peirce V-blocks 2 clamps and 2 screws Auction B

2 Taft Peirce V-blocks 2 clamps and 2 screws Auction B

  • Granger, Indiana, United States
  • Jan 30th
Brown & Sharpe No. 750A V - Blocks MATCHED SET (66)

Brown & Sharpe No. 750A V - Blocks MATCHED SET (66)

  • Hopatcong, New Jersey, United States
  • Jan 30th
MACHINIST TOOLMAKERS BLOCKS

MACHINIST TOOLMAKERS BLOCKS

  • United States
  • Jan 30th
GREAT! CLEVELAND 6MT #6 MORSE TAPER DEAD CENTER FOR LATHE

GREAT! CLEVELAND 6MT #6 MORSE TAPER DEAD CENTER FOR LATHE

  • Chino, California, United States
  • Jan 30th
5c Headstock Male Center

5c Headstock Male Center

  • Rochester, New York, United States
  • Jan 30th
LIVE CENTER (NEW) #2 MORSE SHANK

LIVE CENTER (NEW) #2 MORSE SHANK

  • Joplin, Missouri, United States
  • Jan 30th
8” T-NUTS FOR B-208 TYPE CNC LATHE CHUCK JAWS

8” T-NUTS FOR B-208 TYPE CNC LATHE CHUCK JAWS

  • Chino, California, United States
  • Jan 30th
Seco epb e2502 5875 40400

Seco epb e2502 5875 40400

  • Englewood, Colorado, United States
  • Jan 30th
DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR

DZ BRAND JT6 KEY TYPE DRILL CHUCK AND CAT40 DRILL CHUCK ARBOR

  • Murfreesboro, Tennessee, United States
  • Jan 30th
10WR VISE GRIP PLIERS PETERSEN MFG

10WR VISE GRIP PLIERS PETERSEN MFG

  • Napoleon, Ohio, United States
  • Jan 30th
4 PC KNU-VISE Toggle Clamp,Model P-400-,4-3/4'' Long

4 PC KNU-VISE Toggle Clamp,Model P-400-,4-3/4'' Long

  • La Puente, California, United States
  • Jan 30th
(T2-5) 6 NEW CLIMAX 35463553 2 PIECE ALUMINUM CLAMP COLLARS

(T2-5) 6 NEW CLIMAX 35463553 2 PIECE ALUMINUM CLAMP COLLARS

  • Cleveland, Ohio, United States
  • Jan 30th
Jacobs Spindle Nose Lathe Collet Chuck and Rubber Flex Collets

Jacobs Spindle Nose Lathe Collet Chuck and Rubber Flex Collets

  • DeKalb, Illinois, United States
  • Jan 30th
USED FINN SPEEDEX 360 HORIZONTAL VERTICAL 5C COLLET INDEXING FIXTURE

USED FINN SPEEDEX 360 HORIZONTAL VERTICAL 5C COLLET INDEXING FIXTURE

  • San Bernardino, California, United States
  • Jan 30th
CNC ATS SPINDLE COLLET CHUCK A8

CNC ATS SPINDLE COLLET CHUCK A8

  • Hernando, Florida, United States
  • Jan 30th
KENNAMETAL ERICKSON TG150 COLLETS SEE DESCRIPTION FOR AVAILABLE SIZES

KENNAMETAL ERICKSON TG150 COLLETS SEE DESCRIPTION FOR AVAILABLE SIZES

  • Wadley, Alabama, United States
  • Jan 30th
HALF-GRIP COLLET SET 13PCS 1/8" TO 7/8" BY 16THS

HALF-GRIP COLLET SET 13PCS 1/8" TO 7/8" BY 16THS

  • Wadley, Alabama, United States
  • Jan 30th
NEW 5C COLLET BLOCK SET- SQUARE, HEX, RINGS & COLLET CLOSER HOLDER

NEW 5C COLLET BLOCK SET- SQUARE, HEX, RINGS & COLLET CLOSER HOLDER

  • Troy, Michigan, United States
  • Jan 30th
FOOT CONTROL PEDDLE

FOOT CONTROL PEDDLE

  • West Mifflin, Pennsylvania, United States
  • Jan 30th
Vintage Young's 3/16" Steel Stamps w/box 27 Alphabet w/. & 9 Numbers 1-9 +0

Vintage Young's 3/16" Steel Stamps w/box 27 Alphabet w/. & 9 Numbers 1-9 +0

  • Chicago, Illinois, United States
  • Jan 30th
( 4 ) Teco 3/8-16 Quarter 1/4 Turn T-Slot Nuts T-Nut tT Nut

( 4 ) Teco 3/8-16 Quarter 1/4 Turn T-Slot Nuts T-Nut tT Nut

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Airmatic Engineering CNC Horizontal Rotary Table 48” Dia. R1200-T738-DRH

Airmatic Engineering CNC Horizontal Rotary Table 48” Dia. R1200-T738-DRH

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
Airmatic Engineering CNC Rotary Table DP500-T389-DRH-070-92 20” Dia.

Airmatic Engineering CNC Rotary Table DP500-T389-DRH-070-92 20” Dia.

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
NEWS Yusaa International Tilting Swivel Table with Hand Crank Made in Japan

NEWS Yusaa International Tilting Swivel Table with Hand Crank Made in Japan

  • Gresham, Oregon, United States
  • Jan 30th
Vise, Vintage Machinist / Hobbyist Vise, 6 lbs., 2-1/2" Wide Jaws, JAPAN

Vise, Vintage Machinist / Hobbyist Vise, 6 lbs., 2-1/2" Wide Jaws, JAPAN

  • Saunderstown, Rhode Island, United States
  • Jan 30th
4' CNC Manual MILLING Machine T-SLOT Protector COVER Plastic FILLER Guide Insert

4' CNC Manual MILLING Machine T-SLOT Protector COVER Plastic FILLER Guide Insert

  • Chilliwack, BC, Canada
  • Jan 30th
Vintage Heinrich Grip Master Vise 4 GM Drill Vise Mill Vise

Vintage Heinrich Grip Master Vise 4 GM Drill Vise Mill Vise

  • Huntington Beach, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies