Motorola Mvme2433 Vme Cpu For Ge Lightspeed Ct Rip 2339284 , With Warranty

US $2200

Sudbury, Massachusetts, United States
May 27th

Open on mobile:
QR code

You are bidding on 1 MVME2433 VME processor card, configured for use in GE Lightspeed series CT machines. These are the main component of the Hawk3 RIP board assembly, GE p/n 2339284. This auction is for the VME CPU board only, it does NOT include the DIP PMC card (2245261) or the SCSI PMC, although we do have a potential source of SCSI PMC's if you need them. A technician installing this board will need to do a PFLASH from the workstation when installing this board in the system for the first time. Your machine will also need the correct software load for this version of RIP board. We have a large number of these units available. Contact us for details or with any questions at 978-835-4539. Shipping in the USA is $10, international shipping will be calculated after sale. Payment terms are available to qualified buyers, and we accept corporate and government PO. CAGE code 4DXW9 International bidders may pay by wire only. All others contact us to arrange payment terms. We also provide repairs, spares support, engineering, and consulting services for a wide range of embedded and industrial computer hardware. Creative solutions for maintenance of obsolete hardware are our specialty. Find out more about Embedded Engineering and what we can do for you at www.embeddedsales.com Copyright Motorola Inc. 1988 - 1999, All Rights Reserved PPC4 Debugger/Diagnostics Release Version 1.2 - 02/15/99 RM01 COLD Start Local Memory Found =08000000 (&134217728) MPU Clock Speed =350Mhz BUS Clock Speed =100Mhz Reset Vector Location : ROM Bank B Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE System Memory: 128MB, ECC Enabled (ECC-Memory Detected) L2Cache: 1024KB, 140Mhz PPC4-Bug>sd PPC4-Diag>cnfg Board (PWA) Serial Number = "<REDACTED> " Board Identifier = "MVME2433-1 " Artwork (PWA) Identifier = "01-W3839F05A " MPU Clock Speed = "350" BUS Clock Speed = "100" Ethernet Address = <REDACTED> Primary SCSI Identifier = "07" System Serial Number = " " System Identifier = " " License Identifier = "<REDACTED> " PPC4-Diag> PPC4-Diag>st HAWK SMCR: SMC Register Read..................... Running ---> PASSED HAWK PPCR: PPC Register Read..................... Running ---> PASSED HAWK PPCW: PPC Register Walking Bit.............. Running ---> PASSED HAWK PCIR: PCI Register Read..................... Running ---> PASSED HAWK TMR: Timers................................. Running ---> PASSED RAM QUIK: Quick Write/Read...................... Running ---> PASSED RAM ALTS: Alternating Ones/Zeroes............... Running ---> PASSED RAM PATS: Patterns.............................. Running ---> PASSED RAM ADR: Addressability......................... Running ---> PASSED RAM CODE: Code Execution/Copy................... Running ---> PASSED RAM PERM: Permutations.......................... Running ---> PASSED RAM RNDM: Random Data........................... Running ---> PASSED RAM BTOG: Bit Toggle............................ Running ---> PASSED RAM REF: Memory Refresh Test.................... Running ---> PASSED RTC RAM: MK48T0x Battery Backed Up RAM.......... Running ---> PASSED RTC ADR: MK48T0x RAM Addressing................. Running ---> PASSED RTC ALARM: MK48T59 Alarm Interrupt.............. Running ---> PASSED UART REGA: Register Access....................... Running ---> PASSED UART IRQ: Interrupt.............................. Running ---> PASSED UART BAUD: Baud Rate............................. Running ---> PASSED UART LPBK: Internal Loopback..................... Running ---> PASSED Z8536 CNT: Counter................................ Running ---> BYPASS Z8536 LNK: Linked Counter......................... Running ---> BYPASS Z8536 IRQ: Interrupt.............................. Running ---> BYPASS Z8536 REG: Register............................... Running ---> BYPASS SCC ACCESS: Device/Register Access.............. Running ---> BYPASS SCC IRQ: Interrupt Request...................... Running ---> BYPASS PAR8730X REG: PC8730x Parallel Port's Register/Data.. Running ---> BYPASS KBD8730X KCCONF: Keyboard Controller................. Running ---> BYPASS KBD8730X KBCONF: Keyboard interface.................. Running ---> BYPASS KBD8730X MSCONF: Mouse interface..................... Running ---> BYPASS ISABRDGE REG: i82378 Register Access................. Running ---> PASSED ISABRDGE IRQ: Interrupt Request...................... Running ---> PASSED VME3 REGR: Register Read......................... Running ---> PASSED VME3 REGW: Register Walking Bit.................. Running ---> PASSED DEC REGA: 7000 PCI Register Access.............. Running ---> PASSED DEC XREGA: 7000 Extended PCI Register Access.... Running ---> PASSED DEC ILR: 7000 Interrupt Line Register Access.... Running ---> PASSED DEC ERREN: 7000 ERREN and SERREN Bit Toggle..... Running ---> PASSED DEC IOR: 7000 I/O Resource Register Access...... Running ---> PASSED DEC SPACK: 7000 Single Packet Xmit/Recv......... Running ---> PASSED DEC CINIT: 7000 Chip Initialization............. Running ---> PASSED CL1283 REG: cl1283 Register Access................. Running ---> BYPASS PPC4-Diag> inkfrog terapeak i000000