Movit Prodder Maxi-800mm Reach Complete With Extra Spring Steel Shaft Cat 45p55

US $71

Clontarf, Australia
May 29th

Open on mobile:
QR code

MOVIT PRODDER 850mm Reach and Extra 50cm Wand Hassle free driving, Reduces risk of bleeding and dead animals Better yield and meat quality – less stress Strong Wand from durable almost indestructible Aluminium and Spring Steel Balanced Weight, No Moving Parts –Solid Drive Electronics Movit Prodder Maxi takes 4 x Size D Alkaline Batteries (included)* *(Please note that batteries will not be included for shipments outside of Australia due to Air Freight regulations) Output Voltage a massive 8,000 to 10,000 Volts whilst still maintaining a respectable 550 mA Battery Current Draw, Using Good Quality Batteries, batteries will last 18 days continuous use (2 seconds on 20 seconds off – 8 hours / day) The cattle prod is intended to stimulate animals to move in stockyards and similar surrounds. Any other use is not intended and bears safety risks. Mitchell Engineering Pty Ltd disclaims any liability whatsoever for any damages caused. The cattle prod is state-of-the-art and complies with heath and safety requirements issued by the EU, however it presents hazards which cannot be eliminated and should be used with extreme care, the unit is a capacitor discharge system and has a memory effect, the probes may remain charged after use. Use on animals only – Never use on humans Keep out of reach of children Do not submerge in liquid – Keep probes clean and dry Complete 2 x 550mm Steel wands and handle OPERATING INSTRUCTIONS: Use only on animals – operation on Humans could result in serious injury and even death. Recommend the use of Alkaline batteries size “D” (4 included)*, install into back cap and replace when spark is weak Secure the wand to handle with locating notch – see assembly instructions. When shorted out and the button is pressed, a sparking will be heard inside the unit – this is normal. This may occur when prodding wet animals. Proceed with caution - potential increase of intensity Ensure back cap and wand collar is secure To achieve less stressed animals, apply the probe to the animal before pressing the button. After probe has made contact, press and hold the button. The animal will move when discomfort level reached. Avoid undue stress – animal may be sick or injured. AS ABOVE PICTURE + 1 EXTRA WAND Please allow a possible additional 2 weeks (approx) for deliveries outside Australia due to customs clearance in receiving country