Ms100 Spo2 Simulator Blood Oxygen & Pulse Rate Simulation Pulse Oximeter Test

US $180

  • Elk grove village,Illinois 60007-4825, United States
  • Aug 22nd
                                                                                                        MS100 SpO2 Simulator Blood oxygen & Pulse Rate Simulation Pulse Oximeter Test                 Brief Introduction MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter. Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.    Features Separated connection between simulator probe and host, operation and test are more convenient. 262K color and 320*240 TFT, adjustable brightness level. Film key-press, makes the operation more comfortable. Power with chargeable lithium battery, can display the charge information of battery. Key volume, can open or close.   Main Functions Oxygen saturation simulation; Pulse rate simulation; Patient state simulation preset; Can test the reaction time of device; Can simulate the SpO2 and pulse rate under different amplitude; Can test the performance of device under different interference source;  Can select different R-curve.   Main Parameters SpO2  Measuring range: 35%~100% Resolution:1% Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%. Pulse rate Measuring range:25bpm~250bpm    Resolution:5bpm Error:1%±1bpm Amplitude Measuring range:0.000%~20.000%  Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%. Patient state 24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup. Voltage    DC 3.6V~4.2V  Power Supply  Voltage 3.7 rechargeable lithium battery 1   Battery working life  Charge and discharge no less than 500 times.   Accessaries A  MS100 user manual  A  5.0V adaptor                                                                                
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Oximeter Type Pulse Oximeter with Probe
Brand CONTEC
MPN Does Not Apply
Form Factor Fingertip
UPC Does not apply

Directions

Similar products from Pulse Oxymeters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies