+ Post new Ad
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 0
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 1
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 2
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 3
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 4
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 5
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 6
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 7
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 8
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 9
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 10
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 11
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 0
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 1
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 2
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 3
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 4
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 5
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 6
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 7
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 8
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 9
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 10
MULTI-POINT TOOL CO HEAVY DUTY QUICK CHANGE 3 MT TOOL HOLDER - #3 MORSE TAPER, US $35.00 – Picture 11

Multi-point Tool Co Heavy Duty Quick Change 3 Mt Tool Holder - #3 Morse Taper

US $35.00

  • San Diego, California, United States
  • May 11th
Open on mobile:
QR code
This Multi-Point Tool Co Heavy Duty Quick Change Holder is compatible with a tool that fits a Morse Taper #3. The item is in great working condition and has been previously used on a Clausing 1300 13" x 36" lathe without being subjected to heavy use or mistreatment. In case you have queries regarding this item or need a specific machine or machine tool accessory, you can reach us at 858-754-8321. Be the proud owner of a tool with a fascinating background! This particular tool holder was originally used by the skilled craftsman Cal Williamson. Mr. Williamson is the mastermind behind the original SRAM Bicycle Gripshift prototype, which has now become the standard for bicycles all over the world. Over the years, he has applied his expertise to various exciting projects ranging from crafting engines, boats, cars, bicycles, planes, and much more!
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Model 3MT Quick Change Tool Holder
Manufacturer Multi-Point Tool

Directions

Similar products from Fast Change Tools

6 PC SET, 2 CAT40 DA300 COLLET CHUCKS & 4 COLLETS CAT 40 DA 300 LOT C12624

6 PC SET, 2 CAT40 DA300 COLLET CHUCKS & 4 COLLETS CAT 40 DA 300 LOT C12624

  • Dayton, Ohio, United States
  • May 16th
BIG MACK 100 TOOL INSPECTION TOOL HOLDER

BIG MACK 100 TOOL INSPECTION TOOL HOLDER

  • San Bernardino, California, United States
  • May 16th
KWIK SWITCH 300 3/4" DIA ENDMILL HOLDER UNIVERSAL ENG 80345 END MILL LOT C12491

KWIK SWITCH 300 3/4" DIA ENDMILL HOLDER UNIVERSAL ENG 80345 END MILL LOT C12491

  • Dayton, Ohio, United States
  • May 15th
KWIK SWITCH 200 3/4" DIA ENDMILL HOLDER 80245 MORE LISTED END MILL LOT C12737

KWIK SWITCH 200 3/4" DIA ENDMILL HOLDER 80245 MORE LISTED END MILL LOT C12737

  • Dayton, Ohio, United States
  • May 14th
Aloris AX-7 Cut Off Tool Holder with Blade

Aloris AX-7 Cut Off Tool Holder with Blade

  • Rocky Point, New York, United States
  • May 14th
KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 3/4" END MILL TOOL HOLDER LOT C12723

KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 3/4" END MILL TOOL HOLDER LOT C12723

  • Dayton, Ohio, United States
  • May 13th
KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 3/4" END MILL TOOL HOLDER LOT C12722

KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 3/4" END MILL TOOL HOLDER LOT C12722

  • Dayton, Ohio, United States
  • May 13th
KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 3/4" END MILL TOOL HOLDER LOT C12725

KENNAMETAL ERICKSON QUICK CHANGE NMTB 30 3/4" END MILL TOOL HOLDER LOT C12725

  • Dayton, Ohio, United States
  • May 13th
Kwik-Switch Tool Holder System

Kwik-Switch Tool Holder System

  • Eagle, Wisconsin, United States
  • May 12th
Aloris BXa turning and facing quick- Change toolholding lot

Aloris BXa turning and facing quick- Change toolholding lot

  • Altamonte Springs, Florida, United States
  • May 12th
KDK 5C - #KDK-119 w/ 5 COLLETS

KDK 5C - #KDK-119 w/ 5 COLLETS

  • Fullerton, California, United States
  • May 11th
PARLEC4 NUMERTAP SYSTEM-700... Quick Change Tap NEW- Never Used

PARLEC4 NUMERTAP SYSTEM-700... Quick Change Tap NEW- Never Used

  • Chicago, Illinois, United States
  • May 10th
PHASE II 10" to 15" BXA SERIES QUICK CHANGE LATHE TOOL POST SET + 5 HOLDERS

PHASE II 10" to 15" BXA SERIES QUICK CHANGE LATHE TOOL POST SET + 5 HOLDERS

  • Covina, California, United States
  • May 10th
Genuine Aloris AXA AXA-9 Quick Change Lathe Tool Holder

Genuine Aloris AXA AXA-9 Quick Change Lathe Tool Holder

  • Monroe, New York, United States
  • May 9th
Cutoff Parting Tool Lathe Tool Holder for Turret or Dual Cross Slide

Cutoff Parting Tool Lathe Tool Holder for Turret or Dual Cross Slide

  • Monroe, New York, United States
  • May 9th
KNURLING TOOL HOLDER

KNURLING TOOL HOLDER

  • Los Angeles, California, United States
  • May 8th
Aloris, CXA Tool Holder, CXA9, For CXA Tool Post

Aloris, CXA Tool Holder, CXA9, For CXA Tool Post

  • Greene, Rhode Island, United States
  • May 7th
10-15" Lathe Wedge Type Quick Change Tool Post, 25116001, 250-222

10-15" Lathe Wedge Type Quick Change Tool Post, 25116001, 250-222

  • Chesterfield, Missouri, United States
  • May 6th
Quick change tool post.

Quick change tool post.

  • Rockport, Maine, United States
  • May 6th
KWIK SWITCH 300 1" DIA ENDMILL HOLDER MORE TOOLING LISTED END MILL LOT C12498

KWIK SWITCH 300 1" DIA ENDMILL HOLDER MORE TOOLING LISTED END MILL LOT C12498

  • Dayton, Ohio, United States
  • May 5th

People who viewed this item also vieved

Cincinnati 40NSE9 No.9 B&S Taper Adapter NMTB40 Taper

Cincinnati 40NSE9 No.9 B&S Taper Adapter NMTB40 Taper

  • Chicago, Illinois, United States
  • Jan 30th
Cat40 Retention Knob Pull Lengthening Stub

Cat40 Retention Knob Pull Lengthening Stub

  • Byron, Georgia, United States
  • Jan 30th
VALENITE BB-3D VARI SET BOARING HEAD

VALENITE BB-3D VARI SET BOARING HEAD

  • Oxford, New Jersey, United States
  • Feb 15th
Boring mill drill holder

Boring mill drill holder

  • Sterling Heights, Michigan, United States
  • Feb 15th
Sandvik RF123E08-1616B – External Parting/Grooving Tool Holder

Sandvik RF123E08-1616B – External Parting/Grooving Tool Holder

  • Denizli,,, Turkey
  • Feb 23rd
Sandvik 266RKF-16-16 CoroThread 266 – Internal threading boring bars

Sandvik 266RKF-16-16 CoroThread 266 – Internal threading boring bars

  • Denizli,,, Turkey
  • Feb 23rd
#30 NMTB X 1-1/2 Inch Shell End Mill Holder

#30 NMTB X 1-1/2 Inch Shell End Mill Holder

  • Chino, California, United States
  • Feb 25th
SANDVIK COROMANT CAPTO END MILL ADAPTER C6-391.20-12 060

SANDVIK COROMANT CAPTO END MILL ADAPTER C6-391.20-12 060

  • Athens, Pennsylvania, United States
  • Feb 25th
Maska #SFx1-15/16 QD Bushing, 1/2" x 1/4" Keyseat, 1-15/16" Bore ~ (Off6B)

Maska #SFx1-15/16 QD Bushing, 1/2" x 1/4" Keyseat, 1-15/16" Bore ~ (Off6B)

  • Saint Louis, Missouri, United States
  • Feb 26th
2- STANDOFF STAINLESS STELL 5/8"OD. 3-7/16" LONG, 6 STEEL BUSHINGS 1-1/16" LONG

2- STANDOFF STAINLESS STELL 5/8"OD. 3-7/16" LONG, 6 STEEL BUSHINGS 1-1/16" LONG

  • Glasgow, Kentucky, United States
  • Feb 26th
Schunk SDF SVL-150-20 D12 Tendo Hydraulic Tool Extension 0206304 NEW

Schunk SDF SVL-150-20 D12 Tendo Hydraulic Tool Extension 0206304 NEW

  • Florence, Alabama, United States
  • Feb 27th
Sandvik 431-820100R205-3 Spacer,3.15" x 1-1/2" x .400" long

Sandvik 431-820100R205-3 Spacer,3.15" x 1-1/2" x .400" long

  • Lebanon, Tennessee, United States
  • Feb 27th
NEW CAT40 CAT 40 1" x 1.5 End Mill Tool Holder V Flange

NEW CAT40 CAT 40 1" x 1.5 End Mill Tool Holder V Flange

  • Portland, Oregon, United States
  • Mar 2nd
NEW CNC G BT40-EM5/8-2.50-B BT40 BT 40 5/8" x 2.5 End Mill Tool Holder V Flange

NEW CNC G BT40-EM5/8-2.50-B BT40 BT 40 5/8" x 2.5 End Mill Tool Holder V Flange

  • Portland, Oregon, United States
  • Mar 2nd
Lenox 1771984 Lenox Bi-Metal Hole Saw-2-3/8" HOLE SAW

Lenox 1771984 Lenox Bi-Metal Hole Saw-2-3/8" HOLE SAW

  • Brooklyn, New York, United States
  • Mar 25th
Jacobs Model 11N 3/8" x 2JT Super Ball Bearing Keyed Drill Chuck- TIR .003"

Jacobs Model 11N 3/8" x 2JT Super Ball Bearing Keyed Drill Chuck- TIR .003"

  • Hamden, Connecticut, United States
  • Mar 25th
Whitnon High Speed Milling Spindle 12,000 RPM (441-0030-000)

Whitnon High Speed Milling Spindle 12,000 RPM (441-0030-000)

  • Fort Worth, Texas, United States
  • May 26th
Wolfgang Engineering CNC Router Spindle. WW-650? (Shapeoko, Taig, Sherline )

Wolfgang Engineering CNC Router Spindle. WW-650? (Shapeoko, Taig, Sherline )

  • Crossville, Tennessee, United States
  • May 28th
Sunnen CR 1900 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

Sunnen CR 1900 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

  • Scottsdale, Arizona, United States
  • May 28th
Sunnen CR 2100 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

Sunnen CR 2100 Connecting Rod Reconditioning Mandrel: Wedges, NIB Shoes Stone

  • Scottsdale, Arizona, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies