+ Post new Ad
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 0
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 1
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 2
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 3
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 4
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 5
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 6
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 7
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 8
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 9
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 10
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 11
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 0
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 1
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 2
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 3
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 4
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 5
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 6
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 7
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 8
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 9
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 10
NACHI 2.0"X8.0" HS-Co8 AJ LEAD END MILL --NEW OTHER--NEVER USED 2" DIAMETER, US $125.00 – Picture 11

Nachi 2.0"x8.0" Hs-co8 Aj Lead End Mill --new Other--never Used 2" Diameter

US $125.00

  • Winona, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
NACHI END MILL 2" DIA. X 8" CUTTING SURFACE 8 FLUTES OVERALL LENGTH 11-3/4" WEIGHT:  8LB. 5OZ. ETCHED ON THE SHANK IS:  HS-Co8  NACHI  AJ LEAD  10.8976   JAPAN I'm not a machinist, nor have I ever played one on TV. I figure that since you are looking at this listing you know more about this tool than I do. If you are considering buying please look at all the pictures and ask any questions first. I will answer the best I can. Note the picture showing the radius cut on one of the flutes. RETURNS NOT ACCEPTED ON THIS ITEM. Ships in a USPS Medium Flat Rate Priority box. International shipping would be handled by the eBay Global Shipping Program, and I have no way of calculating the cost.  
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “New and unused, without any original packaging. Shows some signs of being stored. Check out all the photos.”

Directions

Similar products from End Mills Router & Drill Bits

END MILL NEW 1" 5 1/2 " LONG 510038 HSSCO LEAD 5.441 ROUGHER OUERSTOCK CLOSE O

END MILL NEW 1" 5 1/2 " LONG 510038 HSSCO LEAD 5.441 ROUGHER OUERSTOCK CLOSE O

  • Athens, Texas, United States
  • Jan 30th
OSG Hy-Pro Spiral Flute Tap 3/8-16 NC 2B HSE 7841 TiN, New In Box 2331605

OSG Hy-Pro Spiral Flute Tap 3/8-16 NC 2B HSE 7841 TiN, New In Box 2331605

  • Winchester, Kentucky, United States
  • Jan 30th
endmill #5 new fascut 2'' hss lead 8.050 ap 2 flute new close out stock ball

endmill #5 new fascut 2'' hss lead 8.050 ap 2 flute new close out stock ball

  • Athens, Texas, United States
  • Jan 30th
(U58) Clearance - Whole lot (10 pcs) of HSS-Co TICN endmill from Italy & UK

(U58) Clearance - Whole lot (10 pcs) of HSS-Co TICN endmill from Italy & UK

  • default, default, Singapore
  • Jan 30th
Brand New BILZ German made Quick ChangeTapping Chuck

Brand New BILZ German made Quick ChangeTapping Chuck

  • default, default, Singapore
  • Jan 30th
Brand New BILZ German made Quick ChangeTapping Adaptor WES 3B

Brand New BILZ German made Quick ChangeTapping Adaptor WES 3B

  • default, default, Singapore
  • Jan 30th
(U11) Solid Carbide Micro Endmill 3 flutes Swiss Made - Lot 10 pcs

(U11) Solid Carbide Micro Endmill 3 flutes Swiss Made - Lot 10 pcs

  • default, default, Singapore
  • Jan 30th
(U9) Solid Carbide Tungsten Slot - Straight Flutes Endmill

(U9) Solid Carbide Tungsten Slot - Straight Flutes Endmill

  • default, default, Singapore
  • Jan 30th
ONSRUD 61-062 Routing End Mill,O-Flute,3/16,5/8,2

ONSRUD 61-062 Routing End Mill,O-Flute,3/16,5/8,2

  • Daytona Beach, Florida, United States
  • Jan 30th
END MILL NEW ROUGH CUTTER FASCUT 1 1/4 USA COBALT 6 FLUTE G9

END MILL NEW ROUGH CUTTER FASCUT 1 1/4 USA COBALT 6 FLUTE G9

  • Athens, Texas, United States
  • Jan 30th
Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe

Lot of 8 Counter Sink Debur Machinist Gunsmith for Milling/Lathe

  • Hillside, New Jersey, United States
  • Jan 30th
3/4" Fastcut Tool CPM Ball end mill, 3/4" SHK, 4 Flute, 1-5/8" LOC, 3-7/8" OAL

3/4" Fastcut Tool CPM Ball end mill, 3/4" SHK, 4 Flute, 1-5/8" LOC, 3-7/8" OAL

  • Cleveland, Ohio, United States
  • Jan 30th
3/4" x 3/4" x 1-5/8 " x 3-3/8" PM COBALT 4 FL Weldon Rougher End Mill - E44

3/4" x 3/4" x 1-5/8 " x 3-3/8" PM COBALT 4 FL Weldon Rougher End Mill - E44

  • Cleveland, Ohio, United States
  • Jan 30th
1" Fastcut Tool HSS Ball End Mill 4 flute, 2" LOC x 4-1/2" OAL - NEW

1" Fastcut Tool HSS Ball End Mill 4 flute, 2" LOC x 4-1/2" OAL - NEW

  • Cleveland, Ohio, United States
  • Jan 30th
31/64" x 1/2" x 13/16" x 3-3/4" 2 FL Double End CoBB484-3 Weldon End Mill - W17

31/64" x 1/2" x 13/16" x 3-3/4" 2 FL Double End CoBB484-3 Weldon End Mill - W17

  • Cleveland, Ohio, United States
  • Jan 30th
1/2" 2 FL 1-1/2" LOC x 3-1/2" OAL BMF16-3 Weldon Medium Long End Mill - E56

1/2" 2 FL 1-1/2" LOC x 3-1/2" OAL BMF16-3 Weldon Medium Long End Mill - E56

  • Cleveland, Ohio, United States
  • Jan 30th
1" Fastcut FINISHING double end End Mill 2 flute, 1-5/8 LOC, 5-7/8" OAL COBALT

1" Fastcut FINISHING double end End Mill 2 flute, 1-5/8 LOC, 5-7/8" OAL COBALT

  • Cleveland, Ohio, United States
  • Jan 30th
5/8 x 5/8" x 1-3/8 x 3-1/2" R20-4 HSS Ball End Mill 2 flute Weldon Tool - E41

5/8 x 5/8" x 1-3/8 x 3-1/2" R20-4 HSS Ball End Mill 2 flute Weldon Tool - E41

  • Cleveland, Ohio, United States
  • Jan 30th
1/2" 2 FL 1" LOC x 3" OAL B16-3 WELDON HSS END MILL - E53

1/2" 2 FL 1" LOC x 3" OAL B16-3 WELDON HSS END MILL - E53

  • Cleveland, Ohio, United States
  • Jan 30th
5/8" x 5/8" x 1-5/8" x 3-3/4" 3 flute Cobalt Brubaker TiCN Rough End Mill

5/8" x 5/8" x 1-5/8" x 3-3/4" 3 flute Cobalt Brubaker TiCN Rough End Mill

  • Cleveland, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

ISCAR GTL 5 8D IC 656 Carbide 10 Inserts Grooving Self Grip Lathe Cut-Off Gold

ISCAR GTL 5 8D IC 656 Carbide 10 Inserts Grooving Self Grip Lathe Cut-Off Gold

  • Oxnard, California, United States
  • Jan 30th
TNMG 64NG uncoated - .187" wide

TNMG 64NG uncoated - .187" wide

  • Clawson, Michigan, United States
  • Jan 30th
WELDON PILOTED COUNTERSINK

WELDON PILOTED COUNTERSINK

  • Haysville, Kansas, United States
  • Jan 30th
tool post grinder

tool post grinder

  • Dexter, Maine, United States
  • Jan 30th
20mm x 2.5 Metric Left hand Die M20 x 2.5mm Pitch

20mm x 2.5 Metric Left hand Die M20 x 2.5mm Pitch

  • china, China
  • Jan 30th
30mm x 2 Metric Right hand Die M30 x 2.0mm Pitch

30mm x 2 Metric Right hand Die M30 x 2.0mm Pitch

  • china, China
  • Jan 30th
1.200" Butterfield Expansion Reamer #3MT Shank

1.200" Butterfield Expansion Reamer #3MT Shank

  • Lebanon, Tennessee, United States
  • Jan 30th
.780 #2MT Shank Unknown Reamer

.780 #2MT Shank Unknown Reamer

  • Lebanon, Tennessee, United States
  • Jan 30th
Vintage Lumber Jack Hand Saw, Cut Teeth 36"

Vintage Lumber Jack Hand Saw, Cut Teeth 36"

  • Spring Valley, California, United States
  • Feb 22nd
(4PCK) SIMONDS 11'6 X 3/4 X .035 6TPI WELDED TO LENGTH BI-METAL

(4PCK) SIMONDS 11'6 X 3/4 X .035 6TPI WELDED TO LENGTH BI-METAL

  • Cleveland, Ohio, United States
  • Feb 24th
NTK Carbide Ceramic Inserts DNGA433T0525 HC2 Qty 10 [1987]

NTK Carbide Ceramic Inserts DNGA433T0525 HC2 Qty 10 [1987]

  • Saint Louis, Missouri, United States
  • Feb 26th
NTK Ceramic Turning Inserts WNGA433T0220 WA1 Qty 10 [1987]

NTK Ceramic Turning Inserts WNGA433T0220 WA1 Qty 10 [1987]

  • Saint Louis, Missouri, United States
  • Feb 26th
Freud BP50057R Industrial Carbide Tipped Brad Point Boring Bit Right Hand 5m...

Freud BP50057R Industrial Carbide Tipped Brad Point Boring Bit Right Hand 5m...

  • United States
  • Mar 4th
60 Assorted Brand / Size Steel Boring / Cutting Bits

60 Assorted Brand / Size Steel Boring / Cutting Bits

  • Canadensis, Pennsylvania, United States
  • Mar 4th
Rotobroach Annular Cutters Brand New

Rotobroach Annular Cutters Brand New

  • Walworth, New York, United States
  • May 14th
HOUGEN 12128 7/8'' ROTABROACH 1'' CUTTER

HOUGEN 12128 7/8'' ROTABROACH 1'' CUTTER

  • Madison, Tennessee, United States
  • May 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies