Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 0

Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 1

Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 2

Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 3

Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 4

Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 5

Narda 8716 Radio Frequency RF Radiation Meter Test Set w/8722 0.3 MHz-40 GHz EMI, US $499.99 – Picture 6

Narda 8716 Radio Frequency Rf Radiation Meter Test Set W/8722 0.3 Mhz-40 Ghz Emi

US $499.99

Tucson, Arizona, United States
Jan 29th

Open on mobile:
QR code

Narda 8716 meter with 300 kHz to 40 GHz Electric Field probe. Tested working with a 5W 146 MHz ham radio signal. Battery charges to a level above the "test min" mark. Narda 8716 Radio Frequency Radiation Meter Test Set with an 8722 Probe Comes with what you see in the pictures. Specifications are from Narda and may vary slightly due to upgrades, options, or revisions this unit may or may not have. Link to the Manual: Narda 8700 Series Radiation Meter ManualFeatures: Compatible with probes covering 3 kHz to over 40 GHz Continuous Automatic Zero Audible Alarm Built-In Field Test Oscillators Applications: RF Hazard Identification and Contorl - General Population, Occupational, Military Safety Monitoring - Above and below deck, Flight Line, Portable and mobile equipment, Land based installations Compliance Monitoring - Antenna "farms", Airports, Industrial Emitters, Public Exposure EMI Susceptibility Testing (RS03) Description: The Narda 8716 Meter is designed to meet the increased requirements for radiation monitoring equipment while maintaining ease of use. Narda's ultrabroadband 300 kHz to 40 GHz probes (8722, 8741) allow single probe monitoring while applications requiring magnetic field measurements are potentially more accurate due to their minimal out of band responses. For the first time, systems are available that combine automatic zeroing with accurate modulated signal measurements. The Model 8716 Meter performs measurements in accordance with both ANSI and FCC recommendations for radiation monitoring test equipment. The 8716 is also capable of operating with the Model 8696 Spatial Monitor for time or spatial averaging requirements.8716 Meter Specifications: Dynamic Range: 30 dB Scale: 3-10 dB full scale ranges: 3, 30, and 300% (ANSI MPE). .2, 2, 20; 1, 10, 100; 2, 20, 200, 2000 mW/cm2 Meter: D'Arsonval Type 4-1/2" scale Instrument Accuracy: ±3% Response Time (Approx.): 1 second, 3 seconds most sensitive scale Zero Control: Type: Continuous automatic zeroing in effect during built-in test and all measurements Offset: .1%/°C typical Maximum Hold Mode: Displays maximum average exposure level that is detected after being placed in the maximum hold mode. Battery: Type: Two rechargeable Ni Cad Batteries (110/220 VAC) Battery Life: 30 hrs. minimum use time, 2:1 use to charge ratio Battery Test: Independent test of each battery with minimum battery condition mark provided on the meter scale Self Test: Number of Signals: 2 Frequencies: 12 GHz (radiated); 10 kHz (conducted) Testability: Independent functional performance confirmation of each field sensitive element, and overall test of supporting electronics. Additional Features: Front Panel Adjustable Alarm Recorder Output: +3 V at fullscale into minimum load resistance of 1000 ? Size: 9.6" x 5.6" x 4.4" (22.8 cm x 13.5 cm x 10.5 cm) Weight: 4.5 lbs. (2.1 kg) Line Operation: 110 / 220 VAC, 50-400 Hz Temperature: Operating: -10°C to +50°C Storage: -55°C to +75°C Environmental: Designed to meet MIL-T-28800 Class 38722 Probe Specifications: Type: E-Field (Shaped to ANSI Std.) Frequency Range: .3 MHz to 40 GHz Power Ranges - Full Scale (Equivalent Power Density): 3%, 30% of Std. 300% Field Strength - Full Scale (MEan Squared Field Strength): Frequency Dependent Calibration Accuracy: ±.5 dB Isotropic Reponse: ±.75 dB Ellipse Ratio: ±.75 dB Frequency Sensitivity: ±2 dB from ANSI Std. CW Overload: 10 dB above full scale Peak Overload: 15 W/cm Calibration Frequencies: MHz: .3, 3, 10, 30, 100, 300, 750, 1000 GHz: 1.7, 2.45, 4, 8.2, 10, 18, 26, 40 Temperature Sensitivity: < 1500 MHz: 1%/°C > 1500 MHz: .15%/°C Zero Offset: 1%/°C (typical) Linearity: 1% above 1500 MHz, 2% below 1500 MHz High Frequency BIT: Applicable Low Frequency BIT: Applicable

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Worked properly when measuring 146 MHz ham radio signal.”