National Instruments Scxi-1327 High-voltage Attenuator Terminal Block

US $251.99

Phoenix, Arizona, United States
Jun 9th

Open on mobile:
QR code

National Instruments SCXI-1327 High-Voltage Attenuator Terminal Block Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit is used, removed from service in working condition. The Unit's Serial Number Tag Reads: Model Number: SCXI-1327 Part Number: 182363D-01 Serial Number: Multiple available CE Marked: Yes Link to the Datasheet: National Instruments SCXI Series Terminal Block Datasheet Link to the Manual: National Instruments SCXI-1327 Terminal Block Manual Key Features: Extended signal input range to 300 Vrms or 300 VDC; switch configurable per channel For measuring signal levels up to 300 V For use with the SCXI-1120/1120D/1121/1125/1126 Mounts to the front of SCXI module Shielded for quick, convenient signal connections Description: With the SCXI-1327 you can extend the input range of the SCXI-1120/D, SCXI-1121 and SCXI-1125 to ±300 Vrms, and extend the threshold level of the SCXI-1126 module from 5 V up to 300 V. The extended input voltage range is enabled or disabled on a per-channel basis using switches located within the SCXI-1327. The SCXI-1327 also included an onboard temperature sensor for cold-junction compensation with thermocouples. Using the SCXI-1327 reduces the input impedance of your SCXI module to 1 MΩ. Electrical Specifications: Compatible Modules: SCXI-1120/1120D: 8 input channels SCXI-1121: 4 input channels, 4 excitation output channels SCXI-1125: 8 input channels SCXI-1126: 8 input channels Cold-Junction Temperature-Sensor Circuitry: Sensor Type: Thermistor Output Range: 1.91 to 0.65 VDC from 0 to 50° Accuracy1: ±0.9°C from 15 to 35°C. ±1.3°C from 0 to 15°C and 35 to 50°C Repeatability: ±0.5°C from 15 to 35°C Maximum Temperature Gradient Between Sensor and Any Terminal: ±0.4°C (non-isothermal) High-Voltage Attenuator: Attenuation Ratio: 100:1 or 1:1 (selectable on a per-channel basis using slide switches) Attenuation Ratio Accuracy: ±0.06% (for 100:1 setting) Attenuation Ratio Temperature Drift: 15 ppm/°C Resistance Between CH- and CH+ Terminals: 1:1 Attenuation Setting: Determined by attached module 100:1 Attenuation Setting: 1 MΩ Coupling: DC only Current-Receiver Resistors: Resistors not included, resistor sockets not provided Maximum Working Voltage (signal + common-mode): Channel-to-Ground Voltage: Each channel to remain within 300 Vrms or ±300 VDC of the ground Channel-to-Channel Voltage: Each channel to remain within 300 Vrms or ±300 VDC of the voltage aplied to any other channel Field-Wiring Connectors: Screw Terminals: Signal Terminals: 16 (8 pairs) Functional Ground Terminals: 2 Maximum Wire Gauge: 16 AWG Terminal Spacing: 0.5 cm (0.2 in.) center-to-center Dimensions of Front Entrance: 1.2 cm by 7.3 cm (0.47 in. by 2.87 in.) Solder Pads for Additional Components: None Safety Earth-Ground Lugs: 1 Strain Relief: Strain-relief bar at terminal-block entrance Notes: 1: This includes the accuracy of the temperature sensor itself (±0.5°C) and the temperature difference between the sensor and any screw terminal (which may be as large as ±0.4°C). Mechanical Specifications: Dimensions: 17.8 cm by 7.94 cm by 3.0 cm (7.0 in. by 3.125 in. by 1.2 in.) Weight: 200 g (7 oz) Environmental Specifications: Opearting Temperature: 0 to 50°C Storage Temperature: -20 to 70°C Relative Humidity: 5 to 90% noncondensing Altitude (Maximum): 2000 m Safety Specifications: Safety Compliance: Designed in accordance with IEC 61010-1, UL 3111-1, and CAN/CSA C22.2 No. 1010.1 for electrical measuring and test equipment. Installation Category II. Pollution degree 2. Electromagnetic Compatibility Specifications: EMC/EMI: CE, C-Tick, and FCC Part 15 (Class A) Compliant Electrical Emissions: EN 55011 Class A at 10 m FCC Part 15A above 1 GHz Electrical Immunity: Evaluated to EN 61326:1998, Table 1 For More Pictures Please Click the Following: Picture 2 - Front View Picture 3 - Back View Picture 4 - Serial Number Tag For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $0.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 09/14/15 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

“This part was removed from service in working condition.”

Brand	National Instruments
MPN	182363D-01
Model	SCXI-1327