+ Post new Ad
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 0
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 1
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 2
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 3
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 4
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 5
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 0
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 1
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 2
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 3
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 4
NEAT VINTAGE OUTSIDE CALIPERS machinist measuring tool 0" to 10" STARRETT USA, US $160 – Picture 5

Neat Vintage Outside Calipers Machinist Measuring Tool 0" To 10" Starrett Usa

US $160

  • Rushville, Indiana, United States
  • May 12th
Open on mobile:
QR code
“These are in useable condition. The screw piece is broken but it will still hold them in place. See pictures.”
Manufacturer L.S.STARRETT
Country/Region of Manufacture United States
Country of Manufacture United States
Model 0" to 10"
Brand STARRETT

Directions

Similar products from Calipers & Caliper Rools

L S STARRETT ATHOL Mass MACHINIST 4 1/4 IN MACHINIST ODD LEG CALIPER

L S STARRETT ATHOL Mass MACHINIST 4 1/4 IN MACHINIST ODD LEG CALIPER

  • Furlong, Pennsylvania, United States
  • May 19th
Cabelas Digital Caliper

Cabelas Digital Caliper

  • Petersburg, Michigan, United States
  • May 18th
Vintage C.S. Co. 35" Vernier Caliper

Vintage C.S. Co. 35" Vernier Caliper

  • Garden City, Idaho, United States
  • May 18th
SPI - Inside Dial Metric Caliper Gage Minimum (mm): 10.00 Maximum (mm): 35.00

SPI - Inside Dial Metric Caliper Gage Minimum (mm): 10.00 Maximum (mm): 35.00

  • Minneapolis, Minnesota, United States
  • May 17th
Starrett 26" Master Vernier Caliper No. 123 E&M w Case (Very Nice)

Starrett 26" Master Vernier Caliper No. 123 E&M w Case (Very Nice)

  • San Antonio, Texas, United States
  • May 17th
8 inch dial calipers

8 inch dial calipers

  • Morganton, North Carolina, United States
  • May 16th
200 MM (8") Caliper with Dual Metric/Imperial Digital Screen

200 MM (8") Caliper with Dual Metric/Imperial Digital Screen

  • Toronto, ON, Canada
  • May 15th
BROWN & SHARPE 573 OUTSIDE ONLY 13" VERNIER CALIPER - OLD BUT IT WORKS

BROWN & SHARPE 573 OUTSIDE ONLY 13" VERNIER CALIPER - OLD BUT IT WORKS

  • Manchester, Connecticut, United States
  • May 15th
mitutoyo digital caliper

mitutoyo digital caliper

  • Cabot, Arkansas, United States
  • May 14th
Mitutoya Calipers ID & OD 0-200mm 0-8"

Mitutoya Calipers ID & OD 0-200mm 0-8"

  • Sterling Heights, Michigan, United States
  • May 13th
MODERNTOOLS 0.001" DIAL CALIPER 24" IN WOODEN CASE MODERN TOOLS

MODERNTOOLS 0.001" DIAL CALIPER 24" IN WOODEN CASE MODERN TOOLS

  • Englewood, Florida, United States
  • May 12th
Dial Caliper, Brown & Sharpe 599-579-4, (0 - 6" ) Dial Caliper .001", Swiss Made

Dial Caliper, Brown & Sharpe 599-579-4, (0 - 6" ) Dial Caliper .001", Swiss Made

  • Waco, Texas, United States
  • May 11th
Monster CMI845-ISN Electronic Fractional Caliper With Metal Cover (cmi845isn)

Monster CMI845-ISN Electronic Fractional Caliper With Metal Cover (cmi845isn)

  • United States
  • May 10th
Shars 6

Shars 6" Dial Calipers- show original title

  • Raceland, Louisiana, United States
  • May 9th
Stanless steel Pocket Slide Caliper with case

Stanless steel Pocket Slide Caliper with case

  • Eugene, Oregon, United States
  • May 8th
PTI Pocket Slide Caliper 7" measure inside, outside and deepth

PTI Pocket Slide Caliper 7" measure inside, outside and deepth

  • Eugene, Oregon, United States
  • May 8th
Black Face 6" CALIPER .001 GRAD

Black Face 6" CALIPER .001 GRAD

  • Largo, Florida, United States
  • May 7th
Sorensen "Center-Mike"; Measure Between Holes (CTAM #7475)

Sorensen "Center-Mike"; Measure Between Holes (CTAM #7475)

  • Sicklerville, New Jersey, United States
  • May 7th
STARRETT MODEL 721 DIGITAL CALIPER, 6 INCH, 0.0001 RESOLUTION- show original title

STARRETT MODEL 721 DIGITAL CALIPER, 6 INCH, 0.0001 RESOLUTION- show original title

  • Dayton, Ohio, United States
  • May 7th
mitutoyo 505-675 6" Dial Caliper

mitutoyo 505-675 6" Dial Caliper

  • Mesa, Arizona, United States
  • May 6th

People who viewed this item also vieved

Renishaw Small Circle Accessory Kit

Renishaw Small Circle Accessory Kit

  • Dayton, Ohio, United States
  • Jan 30th
Giddings & Lewis/Sheffield DCC Remote Control Unit (RCU)

Giddings & Lewis/Sheffield DCC Remote Control Unit (RCU)

  • Dayton, Ohio, United States
  • Jan 30th
Mitutoyo dial indicators

Mitutoyo dial indicators

  • Potsdam, New York, United States
  • Jan 30th
Brown and sharpe indicator

Brown and sharpe indicator

  • Potsdam, New York, United States
  • Jan 30th
starrett No. 66 feeler gage .0015"-.025"

starrett No. 66 feeler gage .0015"-.025"

  • Caldwell, Idaho, United States
  • Jan 30th
L.S. STARRETT 18" HEIGHT STAND, No.454, VEINER SCALE, USED

L.S. STARRETT 18" HEIGHT STAND, No.454, VEINER SCALE, USED

  • Piqua, Ohio, United States
  • Jan 30th
Starrett Micrometer 2-3" very clean #239 heavy forged steel frame Carbide Tips

Starrett Micrometer 2-3" very clean #239 heavy forged steel frame Carbide Tips

  • Williamson, New York, United States
  • Jan 30th
CRAFTSMAN Micrometer 2-3"

CRAFTSMAN Micrometer 2-3"

  • Burlington, Kentucky, United States
  • Jan 30th
Vintage Stanley Combination Square Head Only w/ Scribe & Level

Vintage Stanley Combination Square Head Only w/ Scribe & Level

  • Jenison, Michigan, United States
  • Jan 30th
MACHINIST LATHE MILL Machinist Lot of Chuck Chain Bearings Dowel Pins Parts Etc

MACHINIST LATHE MILL Machinist Lot of Chuck Chain Bearings Dowel Pins Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
Road & Property Drafting Scale Stainless Steel 30” Made by MANTUA METAL PRODUCT

Road & Property Drafting Scale Stainless Steel 30” Made by MANTUA METAL PRODUCT

  • Elk River, Minnesota, United States
  • Jan 30th
PRECISION INSTRUMENTS NO. M3R2500H 1/2 INCH DRIVE TORQUE WRENCH 500-2500 IN LB

PRECISION INSTRUMENTS NO. M3R2500H 1/2 INCH DRIVE TORQUE WRENCH 500-2500 IN LB

  • Barre, Massachusetts, United States
  • Jan 30th
Machinists center head - vintage - pre- 1940's

Machinists center head - vintage - pre- 1940's

  • Medina, Ohio, United States
  • Jan 30th
Vintage Starrett 4" combination square, ruler and center head

Vintage Starrett 4" combination square, ruler and center head

  • Medina, Ohio, United States
  • Jan 30th
Ullman Devices Magnetic Indicator Base Plus Three Brass Stops Machinist

Ullman Devices Magnetic Indicator Base Plus Three Brass Stops Machinist

  • Dundalk, Maryland, United States
  • Feb 13th
Starret 657 Magnetic Indicator Holder Set .0001

Starret 657 Magnetic Indicator Holder Set .0001

  • Chicago, Illinois, United States
  • Feb 13th
Protractor

Protractor

  • Naubinway, Michigan, United States
  • Feb 21st
Vintage set trammels Small I beam Compass L S Starrett machinist tool look

Vintage set trammels Small I beam Compass L S Starrett machinist tool look

  • Elgin, Illinois, United States
  • Feb 21st
Machinist Gage Block

Machinist Gage Block

  • Bunnell, Florida, United States
  • Feb 25th
Lufkin Master Planer Gage #900

Lufkin Master Planer Gage #900

  • Strasburg, Pennsylvania, United States
  • Feb 25th
Surface Plate; DoALL 18"x12" (CTAM# 7226)

Surface Plate; DoALL 18"x12" (CTAM# 7226)

  • Sicklerville, New Jersey, United States
  • Mar 9th
used fixture jig 30 x 60 degree block

used fixture jig 30 x 60 degree block

  • Clinton Township, Michigan, United States
  • Mar 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies