+ Post new Ad
NEW 10PAIR 1/8" PARALLEL SET AND 20 PAIRS 1/32" PARALLEL SET, US $79.99 – Picture 0
NEW 10PAIR 1/8" PARALLEL SET AND 20 PAIRS 1/32" PARALLEL SET, US $79.99 – Picture 0

New 10pair 1/8" Parallel Set And 20 Pairs 1/32" Parallel Set

US $79.99

  • Garden Grove, California, United States
  • Jan 30th
Open on mobile:
QR code
               20 PAIRS 1/32" PARALLEL SET  +/- .0001" in Parallelism Paired +/- .0001" in Height Hardness 55 HRC Height Specifications Relate to Consistency Within Each Pair Absolute Heights are Held to +/- .001" All are 6" Long and 1/32" Wide or Thick 1/2" to 1-1/16" High in 1/16" Increments Made of High Grade Alloy Steel Hardened and Ground from Stabilized Stock Each Set Contains One Pair of Each Height Listed:  1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8 & 1-11/16"     10 PAIRS 1/8" PARALLET SET  +/- .0002" in Parallelism Paired +/- .0002" in Height Combo Set, 10 Matched Pairs, Thin Style All the size are 6" Long and 1/8" Wide or Thick High Quality Alloy Steel Easier Handling because there are 2 holes in each one 1/8" Incrementation in 1/8" from 1/2" to 1-5/8" Each Set Contains One Pair of Each Height Listed: 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2 & 1-5/8    

Directions

Similar products from Supporting Blocks & Sets

Machinist Blocks, ideal for Machinist, Toolmakers and Inspectors - Free Shipping

Machinist Blocks, ideal for Machinist, Toolmakers and Inspectors - Free Shipping

  • Twentynine Palms, California, United States
  • Jan 30th
Starrett 57D Full-SZd Surface Gauge W/ Cast Iron Base, 12" and 18" Spindle

Starrett 57D Full-SZd Surface Gauge W/ Cast Iron Base, 12" and 18" Spindle

  • Richmond Hill, New York, United States
  • Jan 30th
Starrett 57B Full-SZd Surface Gauge W/ Cast Iron Base, 9" and 12" Spindle

Starrett 57B Full-SZd Surface Gauge W/ Cast Iron Base, 9" and 12" Spindle

  • Richmond Hill, New York, United States
  • Jan 30th
Starrett 651B5 Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651B5 Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

  • Buffalo Grove, Illinois, United States
  • Jan 30th
PRESTIGE, Quadruple V-Block, 4-Way, 3- 3/4" x 2- 3/4" x 1- 3/8", Pair, /KK4/

PRESTIGE, Quadruple V-Block, 4-Way, 3- 3/4" x 2- 3/4" x 1- 3/8", Pair, /KK4/

  • Saint Louis, Missouri, United States
  • Jan 30th
MACHINIST LATHE MILL 2 micro Starrett # 278 V Blocks with Clamps for Sherline

MACHINIST LATHE MILL 2 micro Starrett # 278 V Blocks with Clamps for Sherline

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Starrett # 567 V Block with Clamp in Box

MACHINIST LATHE MILL Starrett # 567 V Block with Clamp in Box

  • Morris Plains, New Jersey, United States
  • Jan 30th
Precision 1-2-3 Blocks Matched Pair NEW

Precision 1-2-3 Blocks Matched Pair NEW

  • Chino, California, United States
  • Jan 30th
TE-CO Steel Step Blocks - CAPACITY OF FULL BLOCK: 3-1/2" to 9" 5.06 lbs.

TE-CO Steel Step Blocks - CAPACITY OF FULL BLOCK: 3-1/2" to 9" 5.06 lbs.

  • Flushing, New York, United States
  • Jan 30th
ASSORTMENT OF ENCO TE-CO TIETZMANN STEP BLOCKS 1' THICKNESS 2-1/2" TO 6" RANGE

ASSORTMENT OF ENCO TE-CO TIETZMANN STEP BLOCKS 1' THICKNESS 2-1/2" TO 6" RANGE

  • Chino, California, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL 2 SHINEY Hardened 1 2 3 Blocks for Hold Down Set Up

MACHINIST TOOLS LATHE MILL 2 SHINEY Hardened 1 2 3 Blocks for Hold Down Set Up

  • Morris Plains, New Jersey, United States
  • Jan 30th
6" Machinist V-Block Set

6" Machinist V-Block Set

  • Watertown, Connecticut, United States
  • Jan 30th
GERMANY! AMF UNIVERSAL PRECISION STEP BLOCK CLAMPING SET - #6500H

GERMANY! AMF UNIVERSAL PRECISION STEP BLOCK CLAMPING SET - #6500H

  • Los Angeles, California, United States
  • Jan 30th
STARRETT 665A, Base only

STARRETT 665A, Base only

  • Orange, Massachusetts, United States
  • Jan 30th
Precision 1-2-3 Parallel Blocks Set of 4

Precision 1-2-3 Parallel Blocks Set of 4

  • Springfield, Ohio, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Clamps Steel Stamps Cutters Blocks Etc

MACHINIST LATHE MILL Lot of Machinist Clamps Steel Stamps Cutters Blocks Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Ball Bearings Chucks Live Centers Etc

MACHINIST LATHE MILL Lot of Machinist Ball Bearings Chucks Live Centers Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
2 MACHINIST HANGDA V BLOCKS WITH CLAMPS IN WOODEN CASE 2 1/4" X 2 1/4" X 2"

2 MACHINIST HANGDA V BLOCKS WITH CLAMPS IN WOODEN CASE 2 1/4" X 2 1/4" X 2"

  • Naperville, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

Machinist Tool Steel Knee 2-15/16" x 2-7/16" x 3-3/32", (23) 1/4-20 Tapped Holes

Machinist Tool Steel Knee 2-15/16" x 2-7/16" x 3-3/32", (23) 1/4-20 Tapped Holes

  • Saunderstown, Rhode Island, United States
  • Jun 3rd
8" FACE PLATE FOR SUPER SPACER ETC... STK 8277

8" FACE PLATE FOR SUPER SPACER ETC... STK 8277

  • Wadley, Alabama, United States
  • Jun 3rd
Lot of (4) Lathe Chuck Soft Jaw Cam Lock Vise Set of 4 + Free Priority Shipping

Lot of (4) Lathe Chuck Soft Jaw Cam Lock Vise Set of 4 + Free Priority Shipping

  • Kennewick, Washington, United States
  • Jun 3rd
NOS Royal BOWERS UK 4 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.5.4

NOS Royal BOWERS UK 4 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.5.4

  • Perth, Ontario, Canada
  • Jun 4th
NOS Royal BOWERS UK 3 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.4.3

NOS Royal BOWERS UK 3 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.4.3

  • Perth, Ontario, Canada
  • Jun 4th
USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)

USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)

  • Fairfield, Iowa, United States
  • Jun 4th
LYNDEX-NIKKEN 550-005 5' 5C Step Collet

LYNDEX-NIKKEN 550-005 5' 5C Step Collet

  • Duncan, South Carolina, United States
  • Jun 6th
EAGLE ROCK A1-51-5C-4000-2500 Rock 5C Expanding Collet

EAGLE ROCK A1-51-5C-4000-2500 Rock 5C Expanding Collet

  • Duncan, South Carolina, United States
  • Jun 6th
EAGLE ROCK A1-51-5C-4000-3000 Rock 5C Expanding Collet

EAGLE ROCK A1-51-5C-4000-3000 Rock 5C Expanding Collet

  • Duncan, South Carolina, United States
  • Jun 6th
De-Sta-Co DE-STA-CO 325-SS Hold-Down Action Clamp

De-Sta-Co DE-STA-CO 325-SS Hold-Down Action Clamp

  • USA, United States
  • Jun 7th
Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Tapped Through, 5/16"-18

Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Tapped Through, 5/16"-18

  • USA, United States
  • Jun 7th
Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Grade 8, Tapped Through,

Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Grade 8, Tapped Through,

  • USA, United States
  • Jun 7th
LATHE FACE DOG PLATE 1 1/2-8 THREAD MOUNT 8 INCH DIAMETER

LATHE FACE DOG PLATE 1 1/2-8 THREAD MOUNT 8 INCH DIAMETER

  • Sioux Falls, South Dakota, United States
  • Jun 8th
8 inch, 4 jaw lathe chuck # 564 union mfg- co. new britain conn usa

8 inch, 4 jaw lathe chuck # 564 union mfg- co. new britain conn usa

  • Greenfield, Indiana, United States
  • Jun 8th
PBA 814400 8' 4-JAW PLAIN BACK LATHE CHUCK

PBA 814400 8' 4-JAW PLAIN BACK LATHE CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
Palmgren 9638955 Adjustable jack screw, 1.693 to 2.402"

Palmgren 9638955 Adjustable jack screw, 1.693 to 2.402"

  • Wayland, Michigan, United States
  • Jun 8th
Palmgren 9618422 Machine vise w/base, 4.5"

Palmgren 9618422 Machine vise w/base, 4.5"

  • Wayland, Michigan, United States
  • Jun 8th
Palmgren 9638956 Adjustable jack screw, 2.599 to 3.150"

Palmgren 9638956 Adjustable jack screw, 2.599 to 3.150"

  • Wayland, Michigan, United States
  • Jun 8th
Liquitex Basics Acrylic Paint 250ml-Cobalt Blue Hue

Liquitex Basics Acrylic Paint 250ml-Cobalt Blue Hue

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Spiral Shawl Pin-Tiger Ebony

Spiral Shawl Pin-Tiger Ebony

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Komet ABS 20 ER 11 Collet Chuck UA3302780 (LOC2378B)

Komet ABS 20 ER 11 Collet Chuck UA3302780 (LOC2378B)

  • Laingsburg, Michigan, United States
  • Jun 23rd
TROYKE 15" ROTARY TABLE

TROYKE 15" ROTARY TABLE

  • Rush, New York, United States
  • Oct 31st
VINTAGE PALMGREN ROTARY TABLE 8" MILL LATHE MACHINIST CROSS SLIDE METALWORKING

VINTAGE PALMGREN ROTARY TABLE 8" MILL LATHE MACHINIST CROSS SLIDE METALWORKING

  • Painesville, Ohio, United States
  • Nov 1st
Haas HRT-210 Programmable Rotary Table

Haas HRT-210 Programmable Rotary Table

  • Minneapolis, Minnesota, United States
  • Nov 1st
US Made T-Slot Cleaners, Northwestern Tools 47101 Cleaner - Double Sided - 2 pcs

US Made T-Slot Cleaners, Northwestern Tools 47101 Cleaner - Double Sided - 2 pcs

  • Dayton, Ohio, United States
  • Nov 6th
REGO-FIX PHC / ER32 SWISS LINE Floating Chucks Coolant Through 2644.93204.03

REGO-FIX PHC / ER32 SWISS LINE Floating Chucks Coolant Through 2644.93204.03

  • Paterson, New Jersey, United States
  • Nov 6th
South Bend Lathe Company 2" Collectible Brass Coin 2-Sided Keepsake SB1467 New

South Bend Lathe Company 2" Collectible Brass Coin 2-Sided Keepsake SB1467 New

  • Jacksonville, Florida, United States
  • Nov 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies