+ Post new Ad
NEW 5/8" HIGH PRECISION .002" KEYLESS DRILL CHUCK - MT4 MT-4 Shank Metal Lathe, US $260 – Picture 0
NEW 5/8" HIGH PRECISION .002" KEYLESS DRILL CHUCK - MT4 MT-4 Shank Metal Lathe, US $260 – Picture 0

New 5/8" High Precision .002" Keyless Drill Chuck - Mt4 Mt-4 Shank Metal Lathe

US $260

  • Pittsburgh, Pennsylvania, United States
  • Jun 17th
Open on mobile:
QR code
HIGH PRECISION, HIGH QUALITY, These are very nice drill chucks! You are looking at a High Precision Keyless Drill Chuck, with a Capacity from 1/32" - 5/8", and has an integrated Morse Taper #4 Shank. This is great for Metal Lathes, Drill Presses, or any other tool that uses a MT#4 Taper. This listing includes the keyless drill chuck with integrated MT4 Shank as shown, and the spanner wrench shown is also included. These are self tightening drill chucks, with very high gripping power and low runout, making these chucks a very good deal for the quality that you get for this price. Runout on these chucks is +/- .001, (.002" TIR) which is almost unheard of in a drill chuck. When comparing, BE SURE to compare. There are many cheaper and lower quality drill chucks out there, be sure to compare closely. These are in stock here in Pittsburgh, PA, and ship from our location. Fast shipping times too, if ordered by 2PM Eastern Time, it will ship to you same day. If you have any questions at all about anything, please contact us by Ebay message or give us a call at 412-787-2876 Thank you! Our Part# KDCMT4-16

Directions

Similar products from Boring Chucks

AccuPro Keyless Chuck, Jaws, for 5/8"

AccuPro Keyless Chuck, Jaws, for 5/8"

  • Hopkinsville, Kentucky, United States
  • Jun 17th
CAT40 TOOL HOLDER WITH JACOBS 32BA 1/2 " DRILL CHUCK LOC2523

CAT40 TOOL HOLDER WITH JACOBS 32BA 1/2 " DRILL CHUCK LOC2523

  • Sidney, Ohio, United States
  • Jun 17th
CAT40 LYNDEX WITH JACOBS 18N 3/4 " SUPER CHUCK LOC2524

CAT40 LYNDEX WITH JACOBS 18N 3/4 " SUPER CHUCK LOC2524

  • Sidney, Ohio, United States
  • Jun 17th
CAT40 FITZ-RITE WITH JACOBS 1/2 " DRILL CHUCK LOC2525

CAT40 FITZ-RITE WITH JACOBS 1/2 " DRILL CHUCK LOC2525

  • Sidney, Ohio, United States
  • Jun 17th
Campbell Hausfeld 3/8" Revers Drill/Chuck

Campbell Hausfeld 3/8" Revers Drill/Chuck

  • USA, United States
  • Jun 17th
Genuine -USA- 7B Jacobs Chuck 1/4” Capacity 3/8-24 Thread - New Old Stock w/Key

Genuine -USA- 7B Jacobs Chuck 1/4” Capacity 3/8-24 Thread - New Old Stock w/Key

  • Columbus, Ohio, United States
  • Jun 17th
Rohm drill chuck 1/64-1/4 cap 3/8-24 mount.New.

Rohm drill chuck 1/64-1/4 cap 3/8-24 mount.New.

  • Lithonia, Georgia, United States
  • Jun 17th
1/2" GSM Key Drill Chuck, New

1/2" GSM Key Drill Chuck, New

  • Bonney Lake, Washington, United States
  • Jun 17th
Chuck Key - 4 in 1 size 1/4"-7/16" Free shipping!

Chuck Key - 4 in 1 size 1/4"-7/16" Free shipping!

  • McKeesport, Pennsylvania, United States
  • Jun 17th
USED JACOBS 18N SUPER DRILL CHUCK REPLACEMENT SLEEVE 18-N

USED JACOBS 18N SUPER DRILL CHUCK REPLACEMENT SLEEVE 18-N

  • Fairfield, Iowa, United States
  • Jun 17th
9 DIFFERENT DRILL CHUCKS 9 CHUCKS

9 DIFFERENT DRILL CHUCKS 9 CHUCKS

  • Homewood, Illinois, United States
  • Jun 17th
CAT40 WITH 14N JACOBS 1/2 " SUPER CHUCK LOC2518

CAT40 WITH 14N JACOBS 1/2 " SUPER CHUCK LOC2518

  • Sidney, Ohio, United States
  • Jun 17th
1/2" JACOBS TWO SLEEVE KEYLESS HAMMER DRILL CHUCK 3/8-24 FOR MILWAUKEE DEWALT

1/2" JACOBS TWO SLEEVE KEYLESS HAMMER DRILL CHUCK 3/8-24 FOR MILWAUKEE DEWALT

  • Highland, Indiana, United States
  • Jun 17th
Albrecht Keyless Drill Chuck 0-3/8" 0-10mm Threaded Shank Insert Used

Albrecht Keyless Drill Chuck 0-3/8" 0-10mm Threaded Shank Insert Used

  • San Diego, California, United States
  • Jun 17th
Royal Products 25300 J0 Taper 1/2" Diameter Shank Sensitive Drill Feed New

Royal Products 25300 J0 Taper 1/2" Diameter Shank Sensitive Drill Feed New

  • Loveland, Ohio, United States
  • Jun 17th
JACOBS 14N SUPER DRILL CHUCK WITH 3MT SHANK STK 8999

JACOBS 14N SUPER DRILL CHUCK WITH 3MT SHANK STK 8999

  • Wadley, Alabama, United States
  • Jun 17th
JACOBS 14N SUPER DRILL CHUCK WITH 1MT SHANK STK 9000

JACOBS 14N SUPER DRILL CHUCK WITH 1MT SHANK STK 9000

  • Wadley, Alabama, United States
  • Jun 17th
C40-15SC4 Parlec 31/64 1-1/2 Collet Capacity CAT40 Taper Shank Series TG/PG 150

C40-15SC4 Parlec 31/64 1-1/2 Collet Capacity CAT40 Taper Shank Series TG/PG 150

  • Osceola, Indiana, United States
  • Jun 17th
Albrecht (Germany) 0-1/8 0/3 Precision Keyless Chuck w/Sierra Amer. 1/2" Hand

Albrecht (Germany) 0-1/8 0/3 Precision Keyless Chuck w/Sierra Amer. 1/2" Hand

  • Hampshire, Illinois, United States
  • Jun 17th
Albrecht (Germany) 0-5/16" 0/8 Precision Keyless Chuck w/ 1/2" Shank

Albrecht (Germany) 0-5/16" 0/8 Precision Keyless Chuck w/ 1/2" Shank

  • Hampshire, Illinois, United States
  • Jun 17th

People who viewed this item also vieved

3/16" Parlec CAT30 End Mill Holder #C30-18EM2 Taper Tool CAT 30

3/16" Parlec CAT30 End Mill Holder #C30-18EM2 Taper Tool CAT 30

  • Grand Rapids, Michigan, United States
  • Jan 30th
1/2" Sandvik CAT30 End Mill Holder #30MM-VF2.5-EM4 Taper Tool CAT 30

1/2" Sandvik CAT30 End Mill Holder #30MM-VF2.5-EM4 Taper Tool CAT 30

  • Grand Rapids, Michigan, United States
  • Jan 30th
VALENITE - MODCO, ADJUSTABLE REAMER, M1023771, NOS HSK63-A

VALENITE - MODCO, ADJUSTABLE REAMER, M1023771, NOS HSK63-A

  • McKee, Kentucky, United States
  • Jan 30th
UM DANDIA, ADJUSTABLE BORING TOOL, 11.112358 HSK 63A, NOS

UM DANDIA, ADJUSTABLE BORING TOOL, 11.112358 HSK 63A, NOS

  • McKee, Kentucky, United States
  • Jan 30th
COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6383

COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6383

  • Dayton, Ohio, United States
  • Jan 30th
COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6406

COMMAND BT30 TG100 COLLET CHUCK ONLY $25.00 EA MORE LISTED BT30 TG 100 LOT C6406

  • Dayton, Ohio, United States
  • Jan 30th
PNEUMATIC SCALE PSC W-15503 BRASS 4IN MECHANICAL BUSHING 1-3/4IN B324612

PNEUMATIC SCALE PSC W-15503 BRASS 4IN MECHANICAL BUSHING 1-3/4IN B324612

  • Buffalo, New York, United States
  • Jan 30th
LOT 2 MARTIN SFX1-15/16 SPLIT TAPER BUSHING 1-15/16IN BORE KEYED B227883

LOT 2 MARTIN SFX1-15/16 SPLIT TAPER BUSHING 1-15/16IN BORE KEYED B227883

  • Buffalo, New York, United States
  • Jan 30th
UNIVERSAL ENG. CAT50 1-1/4" DIAMETER ENDMILL HOLDER CAT 50 END MILL LOT C10693

UNIVERSAL ENG. CAT50 1-1/4" DIAMETER ENDMILL HOLDER CAT 50 END MILL LOT C10693

  • Dayton, Ohio, United States
  • Jan 30th
VALENITE CAT50 BILZ #2 RIGID TAPPER W/ 4 TAP COLLETS GREAT COND CAT 50 LOT C9781

VALENITE CAT50 BILZ #2 RIGID TAPPER W/ 4 TAP COLLETS GREAT COND CAT 50 LOT C9781

  • Dayton, Ohio, United States
  • Jan 30th
INGERSOLL A15606221PS1 INDEXABLE CARBIDE INSERT DRILL 1.500 DIA

INGERSOLL A15606221PS1 INDEXABLE CARBIDE INSERT DRILL 1.500 DIA

  • Watertown, Connecticut, United States
  • Jan 30th
2-1/4"Cor Bor Carbide insert Indexable Drill Bit Tool Holder

2-1/4"Cor Bor Carbide insert Indexable Drill Bit Tool Holder

  • Watertown, Connecticut, United States
  • Jan 30th
Vermont American Bi-Metal Hole Saw Mandrel # 18503 Fits 1-1/4" To 6"

Vermont American Bi-Metal Hole Saw Mandrel # 18503 Fits 1-1/4" To 6"

  • Kunkletown, Pennsylvania, United States
  • Jan 30th
K.O. LEE EXPANDING MANDREL SET # M101, 3/8” TO 2 1/2 "

K.O. LEE EXPANDING MANDREL SET # M101, 3/8” TO 2 1/2 "

  • Chino, California, United States
  • Jan 30th
Fly Cutter Set - American Made - Excellent Condition

Fly Cutter Set - American Made - Excellent Condition

  • Burlington, West Virginia, United States
  • Jan 30th
ARTOS TOOLHOLDER #2527 AUCTION IS FOR 2 USED TOOL HOLDER

ARTOS TOOLHOLDER #2527 AUCTION IS FOR 2 USED TOOL HOLDER

  • Melrose Park, Illinois, United States
  • Jan 30th
300 Quick Switch 80326 #1 Morse Taper Adapter (44)

300 Quick Switch 80326 #1 Morse Taper Adapter (44)

  • Glasgow, Kentucky, United States
  • Jan 30th
300 Quick Switch 80328 #3 Morse Taper Adapter (29)

300 Quick Switch 80328 #3 Morse Taper Adapter (29)

  • Glasgow, Kentucky, United States
  • Jan 30th
Dorner 21-5-34 Steel Spindle 1" x 5" ! NEW !

Dorner 21-5-34 Steel Spindle 1" x 5" ! NEW !

  • Burlington, ON, Canada
  • Jan 30th
Haas CNC HMC HS1RP Reliance Electric Servo Motor Tool Changer Model E223

Haas CNC HMC HS1RP Reliance Electric Servo Motor Tool Changer Model E223

  • Lake Saint Louis, Missouri, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies