+ Post new Ad
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 0
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 1
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 2
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 3
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 0
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 1
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 2
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm, US $163.00 – Picture 3

New Automatic Screw Feeder Supplier 1.0 – 5.0 Mm

US $163.00

  • CN,CN, China
  • Jun 9th
Open on mobile:
QR code
Brand new Automatic Screw Feeder Supplier 1.0 – 5.0 mm Specifications   Dimension: 123x181x145mm   Input voltage: DC 12V/550mA   Automatic stop: after the screw has lined full, the machine will stop automatic.   Screw head: suits each tape of screw, Max. length = 20 mm   Output speed: 2 screws/seconds   Weights: 2.92kg   Capacity: 80CC   Features:    One year warranty    Application for the widely range:   The track adjustable freely to suit variety kinds of type screws, such as M1.0– M5.0 standard screws (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0), special screw, 1:1 short screw, filling piece screw ect.   Speed adjustable:   Feeding system and drive system are two independent control departments, can set the time delay freely to adjust the feed speed, suit many kinds of works.   Automatic alarm function   When occur the non-normal situation, the feeder will automatic alarm.   No jamming screws situation:   The screws move and roll down inside the bucket, all the screws which did not enter the track will be cleared to enter the next circle, screws will not be stuck, the check point will not vibrate.   Simple operation:   All is easy to understand whatever the metric specifications or British specifications.   Mini size, Can increase productivity significantly.   Package Includes   1X machine 1X 110V or 220V power 1X manual 1X  Inward hexagonal wrench   
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand RW
MPN Does Not Apply
UPC Does not apply

Directions

Similar products from Screw Machines Equipment

THREAD CHASERS{4}GEOMETRIC 5/8-11 1"D HEAD 22DEGREE CHAMFER 10DG FACE USA$22.17

THREAD CHASERS{4}GEOMETRIC 5/8-11 1"D HEAD 22DEGREE CHAMFER 10DG FACE USA$22.17

  • North Tonawanda, New York, United States
  • Jun 9th
GEOMETRIC 3.5” Collapsing Tap Stationary and Rotary Type 2-1/4” Straight Shank

GEOMETRIC 3.5” Collapsing Tap Stationary and Rotary Type 2-1/4” Straight Shank

  • Euclid, Ohio, United States
  • Jun 9th
GEOMETRIC 4” Collapsing Tap Stationary and Rotary Type 5MT Shank

GEOMETRIC 4” Collapsing Tap Stationary and Rotary Type 5MT Shank

  • Euclid, Ohio, United States
  • Jun 9th
GEOMETRIC 4” Collapsing Tap Stationary and Rotary Type 2-1/2” Shank

GEOMETRIC 4” Collapsing Tap Stationary and Rotary Type 2-1/2” Shank

  • Euclid, Ohio, United States
  • Jun 9th
GEOMETRIC 4.5” Collapsing Tap Stationary and Rotary Type 5MT Shank

GEOMETRIC 4.5” Collapsing Tap Stationary and Rotary Type 5MT Shank

  • Euclid, Ohio, United States
  • Jun 9th
GEOMETRIC 6” Collapsing Tap Stationary and Rotary Type 2-1/2” Shank

GEOMETRIC 6” Collapsing Tap Stationary and Rotary Type 2-1/2” Shank

  • Euclid, Ohio, United States
  • Jun 9th
Star SV-32JII CNC Swiss Screw Machine with Iemca Magazine Barfeeder

Star SV-32JII CNC Swiss Screw Machine with Iemca Magazine Barfeeder

  • Minneapolis, Minnesota, United States
  • Jun 9th
Boyar Schultz Adjustable Drill & Reamer Holder Pair 00DRH-S 5/8" Shanks

Boyar Schultz Adjustable Drill & Reamer Holder Pair 00DRH-S 5/8" Shanks

  • Jamestown, New York, United States
  • Jun 9th
Acme Gridley Geometric Die Head and 2 Somma Dovetail insert Holder

Acme Gridley Geometric Die Head and 2 Somma Dovetail insert Holder

  • Kent, Washington, United States
  • Jun 9th
LOT OF 12 HSS #1 ACORN DIES 0-80 NF TO 10"-32 UNF TRW

LOT OF 12 HSS #1 ACORN DIES 0-80 NF TO 10"-32 UNF TRW

  • Ellington, New York, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 65 Adjustable Tool Holder 65-122

Brown & Sharpe Screw Machine Turret Lathe No. 65 Adjustable Tool Holder 65-122

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 105-312 Adjustable tap Holder Rele

Brown & Sharpe Screw Machine Turret Lathe No. 105-312 Adjustable tap Holder Rele

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 711-62-122 Slide Tool 1" Shank

Brown & Sharpe Screw Machine Turret Lathe No. 711-62-122 Slide Tool 1" Shank

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 711-165-122 Knee Tool 1" Shank

Brown & Sharpe Screw Machine Turret Lathe No. 711-165-122 Knee Tool 1" Shank

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No 711-172-122 Center and Facing Tool

Brown & Sharpe Screw Machine Turret Lathe No 711-172-122 Center and Facing Tool

  • Flint, Michigan, United States
  • Jun 9th
Armstrong No. 633 Straight Cutter Holder 1" Shank 1/2" Slot

Armstrong No. 633 Straight Cutter Holder 1" Shank 1/2" Slot

  • Flint, Michigan, United States
  • Jun 9th
New Landis Thread Chasers .93 x 2.12 12P UN STD SHT 96-005432

New Landis Thread Chasers .93 x 2.12 12P UN STD SHT 96-005432

  • Flint, Michigan, United States
  • Jun 9th
New Landis Thread Chasers .93 x 2.12 24P UN STD LG 96-006131

New Landis Thread Chasers .93 x 2.12 24P UN STD LG 96-006131

  • Flint, Michigan, United States
  • Jun 9th
New Landis Thread Chasers .93 x 2.12 11.5P NPSM SP 30 SHT 96-132334

New Landis Thread Chasers .93 x 2.12 11.5P NPSM SP 30 SHT 96-132334

  • Flint, Michigan, United States
  • Jun 9th
New Landis Thread Chasers .93 x 2.12 20P AN Form

New Landis Thread Chasers .93 x 2.12 20P AN Form

  • Flint, Michigan, United States
  • Jun 9th

People who viewed this item also vieved

Jacobs 6A Drill Chuck with 1/2" Straight Shank Arbor W- Chuck Key Machinist Tool

Jacobs 6A Drill Chuck with 1/2" Straight Shank Arbor W- Chuck Key Machinist Tool

  • Garden Grove, California, United States
  • Jan 30th
EMUGE SPIRAL TAP M6 ISO 2/6H 1 ENORM HSSE 40DEGREES 5MINUTES/22.4 (QTY.1) #1339

EMUGE SPIRAL TAP M6 ISO 2/6H 1 ENORM HSSE 40DEGREES 5MINUTES/22.4 (QTY.1) #1339

  • Resaca, Georgia, United States
  • Jan 30th
5/16-18 HELICOIL HAND INSTALLATION TOOL 7551-5 NEW IN BOX

5/16-18 HELICOIL HAND INSTALLATION TOOL 7551-5 NEW IN BOX

  • Phoenix, Arizona, United States
  • Jan 30th
Charmilles x y z axis board

Charmilles x y z axis board

  • Anoka, Minnesota, United States
  • Jan 30th
Charmilles u v axis board

Charmilles u v axis board

  • Anoka, Minnesota, United States
  • Jan 30th
Exello Ram Sinker EDM with Digital readouts

Exello Ram Sinker EDM with Digital readouts

  • Litchfield, Ohio, United States
  • Jan 30th
4 Post Strait Sided Press 6 Ton Sharp

4 Post Strait Sided Press 6 Ton Sharp

  • New Berlin, Wisconsin, United States
  • Jan 30th
Dual Pneumatic screwdriver fed press

Dual Pneumatic screwdriver fed press

  • Tolleson, Arizona, United States
  • Jan 30th
Wysong power beading machine floor model hvac forming machine

Wysong power beading machine floor model hvac forming machine

  • Mebane, North Carolina, United States
  • Jan 30th
TWO SUNNEN HONE LA-H SHOES LAH

TWO SUNNEN HONE LA-H SHOES LAH

  • Lubbock, Texas, United States
  • Jan 30th
SUPERIOR HONE CORPORATION MANDREL A-5-5 LENGTH 4" SIZE 0.31 RANGE .302-.365

SUPERIOR HONE CORPORATION MANDREL A-5-5 LENGTH 4" SIZE 0.31 RANGE .302-.365

  • Lubbock, Texas, United States
  • Jan 30th
SUNNEN HONING MANDREL K8 245 AS VALVE GUIDE HONE K8245AS

SUNNEN HONING MANDREL K8 245 AS VALVE GUIDE HONE K8245AS

  • Lubbock, Texas, United States
  • Jan 30th
3 0 MACHINE MM CHAMFERING CHAMFER MR-R500 WHEEL - BEVELING GRINDING

3 0 MACHINE MM CHAMFERING CHAMFER MR-R500 WHEEL - BEVELING GRINDING

  • Shanghai, China
  • Jan 30th
BEVELING 3 GRINDING WHEEL CHAMFERING CHAMFER 0 MM - MACHINE MR-R500

BEVELING 3 GRINDING WHEEL CHAMFERING CHAMFER 0 MM - MACHINE MR-R500

  • Shanghai, China
  • Jan 30th
SHARPENER END 5 SPIRAL MR-X7 0 MACHINE - MM GRINDER 30 DEGREE MILL GRINDING 12

SHARPENER END 5 SPIRAL MR-X7 0 MACHINE - MM GRINDER 30 DEGREE MILL GRINDING 12

  • Shanghai, China
  • Jan 30th
South Bend 10K LIGHT 10 9" LATHE Thread Dial

South Bend 10K LIGHT 10 9" LATHE Thread Dial

  • Brockport, New York, United States
  • Jan 30th
Le Blond Dual drive lathe

Le Blond Dual drive lathe

  • Rockford, Illinois, United States
  • Jan 30th
Lathe Tool Inserts

Lathe Tool Inserts

  • Aurora, Indiana, United States
  • Jan 30th
BORE GAUGE 1.4"~2" 0.0001" REPEAT ACURICY, 0.0005" GRADUATION 0.0001"

BORE GAUGE 1.4"~2" 0.0001" REPEAT ACURICY, 0.0005" GRADUATION 0.0001"

  • Richmond, British Columbia, Canada
  • Jan 30th
TRAV A DIAL MOUNTING WITH PLATE AND BOLTS FOR BRIDGEPORT TYPE MILL BR-1 E-23

TRAV A DIAL MOUNTING WITH PLATE AND BOLTS FOR BRIDGEPORT TYPE MILL BR-1 E-23

  • Huntington Beach, California, United States
  • Jan 30th
Iscar Milling Cutter APK D.75-1.12-W.75 - Stock # 0770

Iscar Milling Cutter APK D.75-1.12-W.75 - Stock # 0770

  • Dundee, Florida, United States
  • Jan 30th
KETT SHN Portable 110V Electric Nibbler Cuts Up To 3/8" Steel And 1/4" Stainless

KETT SHN Portable 110V Electric Nibbler Cuts Up To 3/8" Steel And 1/4" Stainless

  • Williamsburg, Ohio, United States
  • Jan 30th
135 Amp OTC Constant Voltage DC Arc Welding Power Source (MIG Welder) [New 1994]

135 Amp OTC Constant Voltage DC Arc Welding Power Source (MIG Welder) [New 1994]

  • Hauppauge, New York, United States
  • Jan 30th
J. W. Winco Conveyor Leveling Mount w/ Lag Bolt Holes 8" 11T8WP2 NNB

J. W. Winco Conveyor Leveling Mount w/ Lag Bolt Holes 8" 11T8WP2 NNB

  • Roanoke, Virginia, United States
  • Jan 30th
Foley-Belsaw / Carrier Bars / 3 Piece Set / Straight - Back or Miter - Crowned

Foley-Belsaw / Carrier Bars / 3 Piece Set / Straight - Back or Miter - Crowned

  • Bozrah, Connecticut, United States
  • Jan 30th
Foley-Belsaw / Saw Blade Carriers / 3 Piece Set / Ratchet - Index Bars

Foley-Belsaw / Saw Blade Carriers / 3 Piece Set / Ratchet - Index Bars

  • Bozrah, Connecticut, United States
  • Jan 30th
Doall 20x12+ Variable Speed Vertical Bandsaw Tilting Table 3 phase. 3 speed tran

Doall 20x12+ Variable Speed Vertical Bandsaw Tilting Table 3 phase. 3 speed tran

  • Perry, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies