+ Post new Ad
NEW BRUBAKER 3/4" 4 FLUTE ROUGHING COBALT STARCHIP 1 END MILL SCML24-4, US $49.00 – Picture 0
NEW BRUBAKER 3/4" 4 FLUTE ROUGHING COBALT STARCHIP 1 END MILL SCML24-4, US $49.00 – Picture 0

New Brubaker 3/4" 4 Flute Roughing Cobalt Starchip 1 End Mill Scml24-4

US $49.00

  • Rochester, New York, United States
  • Jun 9th
Open on mobile:
QR code
You are bidding on a New Brubaker 3/4" Cobalt HSS 4 Flute Starchip 1 Roughing End Mill, No. SCML24-4-4.  Brubaker's Starchip 1 is a roughing and finishing end mill capable of removing material at high roughing rates, while producing a finish usually equivalent to that produced by conventional means. Right hand cut, center cutting. These end mills are primarily designed to machine titanium alloys. However, they also work very well in stainless steel of all types. The 8 percent cobalt content assures high edge hardness at elevated temperature levels. The large core diameter provides rigidity and reduces deflection, while the specialized cutting geometry promotes efficient stock removal and reduces horsepower requirements. They can be used for profile, slot and pocket milling and are designed to ramp rather than plunge cut.   For More Information see: http://www.wttool.com/index/page/product/product_id/31573/category_id/13935/category_chain/20594,20606,13935/product_name/Starchip+1+Roughing+Mills+%28Brubaker%29 New cost - $120. I will fully guarantee this item - Made in the USA. We have lots of quality tools available - see my other auctions. Shipping in the Continental US is $5.90 - - I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433 (9 - 5pm Eastern).   Pay me securely with your Visa or MasterCard through PayPal! Powered by SixBit's eCommerce Solution
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material HSS
Flutes 4-Flute
End Type Single End
Cutting Diameter 3/4in.
Brand Brubaker
Shank Diameter 3/4in.
Model Starchip 1
Quantity 1
MPN SCML24-4-4

Directions

Similar products from End Mills Router & Drill Bits

Re-Sharpened 3/16" HANITA 2-FL DE Hss End Mill

Re-Sharpened 3/16" HANITA 2-FL DE Hss End Mill

  • South El Monte, California, United States
  • Jun 9th
Re-Sharpened 1/4" OSG 2-FL DE Hss-Co End Mill 52203

Re-Sharpened 1/4" OSG 2-FL DE Hss-Co End Mill 52203

  • South El Monte, California, United States
  • Jun 9th
Re-Sharpened 3/16" OSG 4-FL DE Hss-Co End Mill 54202

Re-Sharpened 3/16" OSG 4-FL DE Hss-Co End Mill 54202

  • South El Monte, California, United States
  • Jun 9th
LOT OF 7 HSS KEYSEAT CUTTERS 49/64" TO 1-33/64" W/ TOOL HOLDER

LOT OF 7 HSS KEYSEAT CUTTERS 49/64" TO 1-33/64" W/ TOOL HOLDER

  • Ellington, New York, United States
  • Jun 9th
Re-Sharpened 1/2" OSG 4-FL DE Hss-Co End Mill 54211

Re-Sharpened 1/2" OSG 4-FL DE Hss-Co End Mill 54211

  • South El Monte, California, United States
  • Jun 9th
DOALL HSS END MILL D610 5/16 DIA 3/8 SHANK 2 FLUTE

DOALL HSS END MILL D610 5/16 DIA 3/8 SHANK 2 FLUTE

  • Titusville, Florida, United States
  • Jun 9th
MORSE HSS 2 FLUTE DOUBLE END END MILL STYLE 1896 3/32" DIA 3/16" SHANK

MORSE HSS 2 FLUTE DOUBLE END END MILL STYLE 1896 3/32" DIA 3/16" SHANK

  • Titusville, Florida, United States
  • Jun 9th
HSS 1/2 x 1/2 x 1-1/4 x 3-1/4 End Mill Drill 4 Flute in Case SEM REG

HSS 1/2 x 1/2 x 1-1/4 x 3-1/4 End Mill Drill 4 Flute in Case SEM REG

  • Tijeras, New Mexico, United States
  • Jun 9th
NEW BRUBAKER 3/16" 4 FLUTE HSS END MILL 79403

NEW BRUBAKER 3/16" 4 FLUTE HSS END MILL 79403

  • Rochester, New York, United States
  • Jun 9th
NEW BRUBAKER 1/2" HSS END MILL 74828

NEW BRUBAKER 1/2" HSS END MILL 74828

  • Rochester, New York, United States
  • Jun 9th
NEW BALAX BX 3/8" Non-Center Cutting Roughing End Mill BX375-6

NEW BALAX BX 3/8" Non-Center Cutting Roughing End Mill BX375-6

  • Rochester, New York, United States
  • Jun 9th
UP TO 3 NEW BRUBAKER 3/4" HSS END MILLS 74043

UP TO 3 NEW BRUBAKER 3/4" HSS END MILLS 74043

  • Rochester, New York, United States
  • Jun 9th
NEW BRUBAKER 1/8" 2 FLUTE DOUBLE END HSS BALL END MILLS 73700

NEW BRUBAKER 1/8" 2 FLUTE DOUBLE END HSS BALL END MILLS 73700

  • Rochester, New York, United States
  • Jun 9th
NEW BRUBAKER 5/8" HSS END MILL 74035

NEW BRUBAKER 5/8" HSS END MILL 74035

  • Rochester, New York, United States
  • Jun 9th
NIB Niagara Cutter CARB DRILL BIT - 5/32 x 3/16 x 1/2 x 2 - EDP N85512 (A-2)

NIB Niagara Cutter CARB DRILL BIT - 5/32 x 3/16 x 1/2 x 2 - EDP N85512 (A-2)

  • Independence, Missouri, United States
  • Jun 9th
5x 1/8" Carbide High Quality CNC Router Bits Single One Flute Tools 3.175 x 12mm

5x 1/8" Carbide High Quality CNC Router Bits Single One Flute Tools 3.175 x 12mm

  • Shanghai, China
  • Jun 9th
Iscar ECI-EL625-1.56C62CF IC900A solid carbide 5/8" end mill 5 varible flute

Iscar ECI-EL625-1.56C62CF IC900A solid carbide 5/8" end mill 5 varible flute

  • Rochester Hills , Michigan, United States
  • Jun 9th
SGS TOOL 9/32" BALL MILL SER 1B EDP#39136

SGS TOOL 9/32" BALL MILL SER 1B EDP#39136

  • West Hartford, Connecticut, United States
  • Jun 9th
CARBIDE ENDMILLS 4 FLUTE LOT GARR TOOL T-1942-C 8- DOUBLE SIDED .123" DIAMETER

CARBIDE ENDMILLS 4 FLUTE LOT GARR TOOL T-1942-C 8- DOUBLE SIDED .123" DIAMETER

  • Grand Rapids, Michigan, United States
  • Jun 9th
M.A.FORD 1/2 2 FLUTE TuffCut AL #13571 [MAF6 13550001N], NEW

M.A.FORD 1/2 2 FLUTE TuffCut AL #13571 [MAF6 13550001N], NEW

  • West Hartford, Connecticut, United States
  • Jun 9th

People who viewed this item also vieved

Keyway Broach Bushing Guide, Type C, 2 11/16" x 3 13/16", Uncollared, Used

Keyway Broach Bushing Guide, Type C, 2 11/16" x 3 13/16", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Keyway Broach Bushing Guide, Type D, 1 13/16" x 5", Uncollared, Used

Keyway Broach Bushing Guide, Type D, 1 13/16" x 5", Uncollared, Used

  • Tazewell, Virginia, United States
  • Jan 30th
Iscar XOMT 060204-HQ IC328 Carbide Inserts (QTY 10) (M669)

Iscar XOMT 060204-HQ IC328 Carbide Inserts (QTY 10) (M669)

  • Dallas, Texas, United States
  • Jan 30th
KENNAMETAL CARBIDE INSERTS , DPMT 3252LF , KC910 , 10 INSERTS

KENNAMETAL CARBIDE INSERTS , DPMT 3252LF , KC910 , 10 INSERTS

  • Berlin, Connecticut, United States
  • Jan 30th
4 PCS CNGA 433 A2 INTERSTATE CERAMIC INSERTS #1-2442CR-102 **NEW**

4 PCS CNGA 433 A2 INTERSTATE CERAMIC INSERTS #1-2442CR-102 **NEW**

  • Mentor, Ohio, United States
  • Jan 30th
5 PCS DNGA 431 A2 INTERSTATE CERAMIC INSERTS #1-2442CR-110 **NEW**

5 PCS DNGA 431 A2 INTERSTATE CERAMIC INSERTS #1-2442CR-110 **NEW**

  • Mentor, Ohio, United States
  • Jan 30th
11/16"-11 SN TREAD CUTTING DIE (B)

11/16"-11 SN TREAD CUTTING DIE (B)

  • Lebanon, Tennessee, United States
  • Jan 30th
11/16"-11 SN TREAD CUTTING DIE (A)

11/16"-11 SN TREAD CUTTING DIE (A)

  • Lebanon, Tennessee, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .200 X 1.200 OB +.012 W8

STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .200 X 1.200 OB +.012 W8

  • Lake Worth, Florida, United States
  • Jan 30th
STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .200 SQ +.008 Q12

STRIPPIT Nisshinbo AMADA PUNCH & DIE WILSON .200 SQ +.008 Q12

  • Lake Worth, Florida, United States
  • Jan 30th
.8453" HS REAMER .625" SHANK 2.5" LOC 7" OAL NST1 533 (LOC1223C) TS12

.8453" HS REAMER .625" SHANK 2.5" LOC 7" OAL NST1 533 (LOC1223C) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
.8453" HS REAMER .625" SHANK 2.5" LOC 7" OAL NST1 533 (LOC1223B) TS12

.8453" HS REAMER .625" SHANK 2.5" LOC 7" OAL NST1 533 (LOC1223B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
A80x10N Staggered Tooth Side Milling Cutter 80x10x22mm Sp1250 HSS R 14-Teeth

A80x10N Staggered Tooth Side Milling Cutter 80x10x22mm Sp1250 HSS R 14-Teeth

  • Middlebury, Indiana, United States
  • Jan 30th
A80x10N Staggered Tooth Side Milling Cutter 80x10x22mm Sp1250 14Teeth KHSS-E 10B

A80x10N Staggered Tooth Side Milling Cutter 80x10x22mm Sp1250 14Teeth KHSS-E 10B

  • Middlebury, Indiana, United States
  • Jan 30th
NEW HS COBALT 1/2" X 4" SQUARE LATHE TOOL BIT STK 1495

NEW HS COBALT 1/2" X 4" SQUARE LATHE TOOL BIT STK 1495

  • Wadley, Alabama, United States
  • Jan 30th
Carboly GR-85 370 Tool Bit, Shank size 1" x 1 1/4" x 8", Carbide tip sharpened

Carboly GR-85 370 Tool Bit, Shank size 1" x 1 1/4" x 8", Carbide tip sharpened

  • Coventry, Rhode Island, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies