New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 0

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 1

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 2

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 3

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 4

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 5

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 6

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 7

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 8

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 9

New C-20 DeDuster for Injection Molder, US $4,400.00 – Picture 10

New C-20 Deduster For Injection Molder

US $4,400.00

Lancaster, Pennsylvania, United States
Jan 30th

Open on mobile:
QR code

Developed for injection molders – the new lightweight DeDuster® made by Pelletron (patent pending) Pelletron, a pioneer in dedusting technology, introduces the C-20, a completely new DeDuster design developed specifically for injection molding processes. + Excellent cleaning/dedusting results + Low construction height – 9.5in (240mm) + Lightweight design – 20lbs (9kg) + Low cost investment Removing dust and streamers prevents the creation of black or weak spots in finished products and results in reduced scrap rates, higher quality parts and improved profit. The design: The lightweight C-20 DeDuster® weighs 20lbs (9kg) and requires only 9.5in (240mm) for installation between the hopper loader and inlet hopper of an injection molding machine. The high cleaning efficiency offers results comparable to the P1 DeDuster®, the current product-of-choice for injection molding applications. It features stainless steel construction, 110 or 220V operation and only consumes 2-3CFM (3.4-5m3/hr) compressed air at 20-30psi (1.5-2bar) pressure. The C-20 DeDuster® is designed for a nominal product flow rate of 50lbs/h (~20kg/h) at 30lbs/ft3 (560kg/m?) bulk density. Flow rates up to 70lbs/h (30kg/h) are possible for products with higher bulk densities. How it works: The design of the C-20 builds upon the features of the proven mini-DeDuster® Series. The product inlet has an integrated agitator to reduce “bridging” and the Venturi design maximizes dust removal performance and minimizes carryover of good product into the dust collector. It operates with compressed air supplied directly from the plant air supply instead of from a separate fan. Inside the unit, the compressed air is split into two air streams for optimal removal of dust and streamers, and an ionizer is used to release the electrostatic bond between the pellets and the dust. The cleaning air blows the removed fines and streamers into two mini-cyclones, which separate them from the air. The separated contaminants are collected in a clear dust collection box and the cleaned air is filtered and released to the atmosphere. For creation of a negative pressure in the entire device, outside air is pulled in through a filter-protected opening. Contact information: Tel.:1.717.293.4008 Web page: www.pelletroncorp.com

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Pelletron Corporation
MPN	C-20 DeDuster
Model	C-20
Country of Manufacture	United States