New Capacitor Capacitance Esr Meter Tester Combo Dmm Mesr-100 + M4070 Lcr Meter

US $95.99

  • ShenZhen,Guangdong, China
  • Jan 29th
template New Capacitor  Capacitance ESR Meter Tester Combo DMM MESR-100+M4070 LCR meter Specification: MESR-100  Accuracy:   Up to 1% (detail on above table) Wide Measurement Range:  >1uF (for 0.1uF the  error will be larger on equation 1/(2*pi*F*C) @ 100Khz ) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range Measuring voltage: <~40mV RMS (TESTING VOLTAGE) Clamping voltage: ~0.15V (open voltage) Battery 2X AA 1.5V battery External Power: 5V micro USB Operating current 0.02A Battery Life time: >80 Hours Range Accuracy (After Zero, tested with 1,10,100R resistor) Refresh Time  (Manual Mode) *Auto mode take  0 to 2s more time depend on value 0.000 to 1.000R 1%+2Digit ~0.4s 1.000 to 10.00R 1%+1Digit ~0.4s 10.00 to 100.0R 2%+1Digit ~0.4s Operating Introduction: 1)     POWER  ON Press and hold the ON/ OFF circle orange button  for 2 to 3 second to power on. Press and release the ON/ OFF button to shut down  meter. 2) AUTO/ MANUAL mode: i) Auto Range: Press and release the RANGE button and at the  first line of LCD will show “AUTO:" At auto mode meter will automatically select the  best range to detect. ii)  Manual Range: Scroll the manual range from 1R, 10R and 100R  range by press and release the RANGE button In LCD will show MANUAL at first LCD line and  show at second line: 0-1R, 1-10R and 10-100R. 3) 1 Key Zero: Short circuit the test leads’ terminal,  cancelling the wire resistance. Press and release the “ZERO" button, LCD  shows “ZERO" and wait the zero disappear. If you are using the meter array socket, you need  to use a short pin to short circuit to set zero. 4) Backlight: LCD backlight will on during power on 5) Auto Sleep: Around 10 hours for not testing, it will shut  down automatically to save power. 6) OVERFLOW or OL: Display overflow when the value is out of range,  you can check that you are zero correctly. 7) ESR TABLE: It is for reference only, different manufacturer  of capacitor has different ESR, better to test a good cap ESR  and compare with what you are testing, usually bad cap with  higher ESR few times larger than good one. 8) SOFTWARE ESR: Put the 25V Electrolytic capacitor value to LCD,  and compare, GOOD if C < XXuF, means the capacitor maybe good  condition if it is less than XXuF 9) PLASTIC STAND: If you don’t use the stand, press and push the  lock position: M4070 M4070 LCR  meter is auto-ranging component tester, can drive up to 500 KHz,  suitable for small value capacitor and inductor measurement. It  provides very stable and high resolution measurement up to 5  digits. Meter can measure 0.00pF to 100.00mF capacitance,  0.000uH to 100.00H and 0.00?? to 10.000M?This meter is using two  technique measurement, LC oscillation and RC oscillation. LC is  much suitable for small value measurement and RC for high value  capacitance. Features:    Fully auto-ranging designed    High resolution, up to 5 digit display, most finest resolution:  0.01pF, 0.001uH, 0.01R    High stability and measurement range for L/ C/ R    USB charging with rechargeable battery inside    Large LCD display with backlight    USB PC program, can take record and pass and fail component sorting  function. Discharge Capacitor before Testing!! 1.Your valid phone number is  very necessary for the shipping, otherwise we can't guarantee that  the package would safely arrives. 2. Any Customs tax applied to this package should be covered by  buyers. What in  Package: 1 x 1 unit MESR-100 V2 1 x M4070 LCR meter Payment 1. Payment methods  accepted : Paypal  only. 2. Payment must be  received within 7  business days of  auction closing.   Shipping 1. We ship your  orders within 1-2  business days after  the payment  received. 2. Item shipped via  Singapore Post or  HongKong Post , It  takes about 7-14  business days (USA,CA,AU,UK).others  country 10-20  business  days(Brzil,India,RU),Exact  delivery time  depends on postal  process. 3. If you do not  receive your item(s)  by 30 business  days,Please feel  free to contact us  via ebay mail system  , we will try our  very best to resolve  any problems with  you    Return Policy 1. Return is  accepted within 7  days after the  buyer's receiving  the item. 2. If this item is  defective upon  receipt, customer  has up to 7 days  from date of receipt  for exchange of a  new one. 3. Unused/unopened  merchandise will be  fully credited.   Other Policies   We are not  responsible for any  custom duty or  import tax.   If you need we write  low price on  shipping bill, pls  leave message when  you make payment .   All emails will be  answered within 24  hours. If you do not  receive our reply,  please kindly  re-sent your email  and we will reply to  you as soon as  possible, Suggest  send eBay message to  us, That is easy to  find .

Directions

Similar products from Capacitance Testers & Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies