New Labelmill 3605 Industrial Print And Apply Label Applicator, Tamp, 5" Wide

US $5400

Saint Charles, Illinois, United States
Jun 8th

Open on mobile:
QR code

This is a brand new, LabelMill 3605 Industrial Print and Apply Label Applicator set up for a 5" max width label, tamp configuration. You must specify tamp pad size, desired print engine, and left or right handed system when ordering! Contact us for alternate applicator size or configuration (Corner Wrap, Blow, Synchronous Feed, etc.) Unit is configured for a maximum width 5" label, with tamp applicator (shown in main photo). Tamp pad size, desired print engine, and right or left handed unit must be submitted with order. Available print engines are Zebra ZE500 series and Sato S84/86ex series. Please contact us for alternate configurations shown in remaining pictures (Corner wrap, blow, synchronous feed, etc.). System comes with base print and apply applicator unit, hand held controller, triggering device, 5' adjustable upright, and "T-Base" platform with locking casters. Please contact us for samples, additional information, or links to videos. Alternate configurations are also available to accommodate label widths from 4.25" - 12.5", and up to 16" diameter storage spools. ***CURRENT LEAD TIME IS 3-4 WEEKS*** The LabelMill® 3605 label printer applicator makes capabilities standard that were once custom on printer applicators. Selections of several standard features are easy to enter using the touch pad and large, back-lit display. The controller software is user friendly and password protected. The hand-held labeler interface allows for quick and easy set-up with adjustment for product delay, tamp duration, cycle type and other key functions. The system’s modular design allows for quick in plant modifications to allow you to meet all your labeling needs. Specifications 3605 Print and Apply Label Applicator System Print Speed/Rate Up to 16” per second and, depending on label and product size, approximately 10 to 90 per minute Print Method Thermal transfer and direct thermal Interface Centronics parallel, RS-232c Serial, Ethernet, Wireless and USB Application Method Tamp is standard Wipe-on, blow, corner-wrap, and adjacent panel are optional Bar Codes UPC-A UPC-E EAN-8 EAN-13 CODE 3912/5 CODE 128 CODABAR MSI 2/5 CODE 93 UPC Bookland Matrix 2/5 POSTNET UCC/EAN 128 PDF-417 Maxicode, Data Matrix Bar Code Ratios 1:2, 1:3, 5:2 Interface Sensors Product sensor-photo eye/limit switch/PLC input Auxiliary output with connector standard Electrical 115 VAC/60Hz - 250 W idle, 600 running Human Readable Fonts 12 proportional and mono-spaced fonts including OCR-A and OCR-B representations and an outline font. American and European characters, uppercase and lower case with descenders (code table 850) Air Requirements 80 psi/3 cfm when equi[[ed with tamp, flag, blow, swing, and corner wrap Environment Operating 50-95° F (10-35° C) 15-85% RH, non-condensing Label Size Minimum 1” wide x 1/2” long Maximum 4” wide x 14” long General Size 32”W x 24”D x 24”H Weight 61 lbs. with u-arm Label Roll Capacity 12” maximum outside diameter wound on a 3” I.D. core. Die-cut waste removed with minimum of 1/8” separations between labels in running direction. Options Right and left-hand models. Sato & Zebra Print Engines • Heavy Duty Industrial Design • 12 Inch Label Storage Spool Standard • Swing Away Tamp Assemble • User-Friendly Operating Software • Batch Counter • Printer Status Outputs • Left and Right-Hand Designs • Hand Held User Interface • Optional System Status Light Tower • Optional Smart Tamp ***CURRENT LEAD TIME IS 3-4 WEEKS*** This store is maintained by CCS, Inc. You can send us a message, 24 hours, 7 days a week, with any questions. GIVE US A CALL AT: 630-377-4664 FREE SHIPPING!!! ***CURRENT LEAD TIME IS 3-4 WEEKS*** WE ARE OFFERING FREE SHIPPING TO ANYWHERE IN THE CONTINENTAL UNITED STATES! PLEASE CONTACT US ANY TIME WITH WITH ANY QUESTIONS, AND PLEASE VISIT OUR STORE FOR PRINTERS, PARTS, FLUIDS AND THE LATEST PRINTING TECHNOLOGIES!