New Mks Dma12tceeann633 100 Torr I-baratron Pressure Transducer Manometer Asm

US $7300

Phoenix, Arizona, United States
Jun 22nd

Open on mobile:
QR code

NEW MKS DMA12TCEEANN633 100 Torr Baratron Pressure Transducer Capacitance Manometer Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from and may vary slightly due to upgrades, options, or revisions this unit may or may not have. These units are new, old stock from excess ASM inventory. The Unit's Serial Number Tag Reads: Model Number: DMA12TCEEANN633 Serial Number: Will vary Breakdown by Part Number: Range: 100 Torr Fittings: 8 VCR Female Accuracy: 0.25% of reading Temperature: Ambient Options: None Calibration Type: No Special Requirement Interface/Connector: DeviceNet/Micro Style, Male (CE) Firmware Revision: Version 3.3 digital Link to the Datasheet: MKS DMA-Series Pressure Transducer Datasheet Link to the Manual: MKS DMA-Series Pressure Transducer Manual Performance Specifications: Sensor Type: Capacitance, Manometer Pressure Range: 100 Torr (Full Scale) Measurement Resolution: 0.001% F.S. for digital output Accuracy (non-linearity, hysteresis, and non-repeatability: 0.25% of Reading Temperature Coefficients: Zero: 0.005% of F.S./°C Span: 0.04% of Reading/°C Sensor Temperature: Ambient Ambient Operating Temperature: 0° to 50°C Warm-up Time: 30 Minutes Mechanical Specifications: Materials Exposed to Gases: Inconel or Incoloy and S.S. fittings Volume (Px side): 6.3 cc Overpressure Limit w/o Damage: 45 psia (310 kPa) Fittings: Swagelok 8 VCR (female) Electrical Specifications: Digital: Protocol: DeviceNet, Group 2 Electrical Connector: 5-pin, sealed micro-style male connector with anti-rotationd evice Data Rate/Network Length: Data rate (user-selectable), 125 Kbps, 500 m (1,6450 ft.), 250 Kbps, 250 m (820 ft.), 500 Kbps, 100 m (328 ft.) Level of Filtering: User software adjustable Digital Functions: Read pressure, Set trip points and hysteresis, Select units: Torr, Pa, mbar, inH2O, psi, Set zero, Reset factory defaults, Monitor transducer trip point status, Change user tags and device address Data Rate Switch: 4 positions: 125, 250, 500K, PGM (pgraommable over the network) MAC ID Switches: 2 switches, 10 positions; 0,0 to 6,3 are hardware ID numbers; 7,0 to 9,9 are software ID numbers (6,4 and 6,9 are unused and, if selected, will default to hardware ID number 6,3) Network Message Control: Master/slave information flow Input Power: 11 to 25 VDC @ < or = to 3.0 watts Network Size: Up to 64 nodes Network Topology: Linear (trunkline/dropline) power and signal on same network cable Analog I/O: Analog Output Signal: 0-10 VDC into > 10 K Ω load Output Connector: 9-Pin Type "D" Visual Communication Indicators: LED network status (green/red), LED module status (green/red) Electromagnetic Compatibility: Fully CE compliant to EMC Directive 89/336/EEC For More Pictures Please Click the Following: Picture 2 - Side View Picture 3 - Top View Picture 4 - Serial Number Tag For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $50.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 01/02/13