New No Reserve Diesel Generator16kw,44-62v Dc,8340p40415 Generator,perkins404d15

US $21,700.00

  • Dana Point, California, United States
  • Jan 30th
This diesel Generator produces and includes :  16kW, 44-62Volt DC, Polar Power 8340p-40415 Generator with Perkins 404D15 engine and 8340 model alternator. Generator includes wire harness, RS 232, diode bridge, fuel sensor, Supra controller, Engine Interface, local display, terminal plate, air filter, air restriction indicator, temperature sensors, heat sink fan, shock mounts and brackets, electric radiator fan tray assembly, large open frame, exhaust assembly, Ethernet module, 28 gal. steel double wall fuel tank. (Tier 4 complaint )* this unit was purchased and was never used. It is still on the pallet wrapped and boxed from manufacturer. All the dyno testing data sheets and bill of sale are included as well as the original estimate and packing slip. The unit was purchased for $21,740.00. For any further questions feel free to contact me.                                         Features Maximum continuous output is 16 kW at 2900 RPM voltages from 44 to 62Vdc Variable speed with a typical 500 RPM span from full load to no load 4 cylinder Perkins 404D15 diesel, quiet and with very low vibration Engine operational life is 10,000 to 16,000 hours based on selected engine RPM and load Temperature compensated battery charging Oil changes at 500 hours with 1,000 hour option Very light weight    Dimensions Supra Controller The Supra Model 250 System is a highly integrated control solution that will improve the reliability, serviceability, and remote controllability of DC generator power systems. The Supra Controller can control power to DC loads and serve as a fuel based programmable battery charging system The Supra Control System Integrates Engine Control Alternator Voltage Regulation Auxiliary Power Inputs Operator Interface Remote Site Monitoring and Communications Supra’s high level of circuit integration eliminates separate and independent control modules, simplifying the wire harness and eliminating the typical conflicts between modules integrated from different manufactures.The Supra Controller based DC generator system can be: remotely controlled, monitored, calibrated, and tested, through an industrial modem, cell phone modem, or Ethernet. Communication is accessible locally with a PC Laptop or remotely through the Internet to facilitate site support and reduce costly visits to the site.The Supra provides a complete log of alarms and operating parameters at the completion of a charge cycle or shutdown due to a fault condition. Alarms can be reset and the generator exercised remotely to help identify potential problems before scheduling a site visit. If an unscheduled maintenance is required, the technician can arrive at the site prepared, reducing the need for a second visit.The Supra facilitates Hybrid Systems incorporating other sources of power including solar, wind, hydro, and utility.All connections to the controllers are through Amp/Tyco Circular C type connectors facilitating onsite repair through controller swapping (plug and play). The controller circuits were designed to meet the most stringent Military and Telecommunications requirements for EMI, EMP, and Ripple.The Supra Controller can meet the requirements of any type of grounding requirement: negative, positive, or float. Supra Advantages 1. Optically isolated RS 232 and CAN bus communications allow the generator to be controlled (locally or remotely) through a PC computer with Polar’s GUI or the customer’s own CAN bus. 2. Precision battery charging using control of both the voltage and current output. Battery charging using a single parameter of voltage control is insufficient because small millivolt changes can cause undesirable, large current fluctuations.   3. User configurable battery charging algorithms for different battery technologies. User configurable: current limit in bulk charge, temperature compensation curves, differentiation of load current and battery charge, and float voltages. 4. Control of Engine: RPM, starter motor, glow plugs, choke, fuel racks, fuel and engine block heaters, and cooling fans. Accurate monitoring of temperatures, pressures, coolant, and fuel levels. 5. Digitally controlled variable parameters: Digital control allows the generators, voltages, currents, engine speeds, and sensor calibrations to be remotely calibrated. All potentiometers were eliminated 6. Set points and recalibration can be performed remotely through the Internet, RS 232, Ethernet, or Cell Phone Modem using Polar’s GUI interface. 7. Software is field upgradeable. 8. 10 bit A/D converters and optically isolated linear amplifiers provide accurate voltage, current, fuel level, oil pressure, temperature, and engine speed measurements. 9. Sensor and communications ports are isolated, so the failure of an input sensor or communications port will not contribute to system conflicts and issues. 10. High immunity to electrical noise. Sources of noise include the starter motor, spark plugs, lightning, coupling of AC sources, cell phone transmissions, microwave, and radar transmissions. 11. Very low conductance and radiation of EMI: A clean DC Power Source is incorporated for the provisioning of sensors, field coils, and actuators with a resultant effect of a reduced EMI source. This is unlike other controller manufacturers, who typically use an unfiltered PWM source of power. Polar Power also increases EMI suppression by housing the three models 250, 290 and 320 in sealed Aluminum enclosures. 12. Polar’s unique circuit provides reliable operation in floating, positive, or negative ground systems. Polar uses switching power supplies to isolate both the positive and negative inputs. Most other controllers use a lower cost 3-pin voltage regulator that creates problems when moving between positive and negative ground systems. 13. The power supplies input and output signals and is fully isolated for up to 1500 Volts, via opto and galvanic couplers. The Supra Control System can tolerate most Hipot testing with controls connected in place. 14. Superior high voltage and current surge immunity from lightning, alternator surges, and load dumps with active voltage clipping circuits. 15. Supra’s microprocessor and relays are able to operate under low voltage conditions during engine cranking with a starting battery in poor condition. 16. AMP / Tyco Circular C type connectors are used to maintain a high degree of reliability and provide ease of field service. Signal pins are gold plated and power pins are silver plated, providing low maintenance operation in high humidity, salt fog, and sandy environments. 17. Model 250 and 290 enclosures are gasket sealed to IP67. 18. Conformally coated circuit boards: all components are soldered in place, except for fuses in the Model 290 module.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Perkins/POLAR POWER
Power Source Diesel
Model 16kW polar power, Perkins
Max Output (KW) 15.1 - 20
MPN 8340P-40415-F
Country/Region of Manufacture United States
Type Stationary

Directions

Similar products from Generators

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies