New Pelco Imp319-1es Sarix 3mp Outdoor Network Mini Dome Surface Mt.

US $299.00

Westminster, California, United States
Jul 17th

Open on mobile:
QR code

New Pelco Sarix IME319-1ES 3MP Surface Mount Environmental Day/Night Mini Dome IP Camera with 3 to 9mm Lens The light gray Sarix IME Series IME319-1ES 3MP Surface Mount Environmental Day/Night Mini Dome IP Camera from Pelco features SureVision 2.0 technology, delivering high-definition (HD) resolution, consistent color accuracy, fast processing power, and simultaneous advanced low-light performance with Wide Dynamic Range (WDR), and Anti-Bloom technologies. Advanced features include 3D noise filtering, smooth response to illumination changes, and improved tone mapping to retain color accuracy and overall image contrast. This Sarix Enhanced Range Mini Dome IP Camera features an integrated 3 to 9mm varifocal autofocus lens. Designed to install quickly, the camera includes autofocus, motorized zoom, built-in analytics, and other advanced features needed for demanding security applications. In addition, a ready-to-install in-ceiling mount is included. The camera supports multiple simultaneous video streams with up to two different configurations. The streams can be compressed in MJPEG and H.264 formats across several resolution configurations. Realtime video with Full HD resolution using H.264 compression allows for optimized bandwidth and storage efficiency. The streams can be configured to a variety of frame rates, bit rates, and group of picture (GOP) structures for additional bandwidth administration. This mini dome IP camera seamlessly connects to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). It also integrates with major third-party video management systems through the Pelco API, and other third-party software and systems through the open ONVIF Profile S standard. Adaptive motion detection allows the camera to record or send an alarm when there is motion in selected zones or in an entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. The Power over Ethernet (PoE) functionality reduces simplifies planning, wiring, and installation. The camera works with PoE-enabled network switches or power injectors, eliminating the need for separate power supplies and cabling, and increasing camera fail-safety through an uninterruptible power supply (UPS). Camera Day/night capability 3 to 9mm autofocus varifocal lens Power over Ethernet (PoE), IEEE 802.3af Adaptive motion detection and camera sabotage analytics Adaptive motion detection and camera sabotage analytics Compatible with Pelco and third-party video systems ONVIF Profile S and Profile G conformant SureVision 2.0 Technology True Wide Dynamic Range (WDR) Advanced low-light performance Anti-Bloom Technology 3D noise filtering Enhanced tone mapping retains color accuracy and image contrast Mount Attaches to standard 4" (10.2 cm) square outlet box and standard 2-gang electrical box 3/4" NPT or 25mm conduit attachments on side and top of back box Meets IP66 and NEMA Type 4X Meets IK10++ (50J) Alodine aluminum construction Features : Camera Sensor 1/3" CMOS Sensor Resolution 3 MP, 2048 x 1536 Imager Readout Progressive scan Signal to Noise Ratio >60 dB Electronic Shutter 1 to 1/77,000 sec Wide Dynamic Range Up to 100 dB White Balance Range: 2,000 to 10,000 K Sensitivity @f/1.2, 2,850K, SNR >20 dB: Color (33 ms): 0.1 lux Color (500 ms): 0.005 lux Mono (33 ms): 0.05 lux Mono (500 ms): 0.0013 lux Mechanical IR Cut Filter Yes, (On/Off/Auto selectable) with different set points on lux Lens Type Built-in, varifocal Focal Length f/1.2, 3 to 9 mm Focus Type Autofocus, motorized Zoom Remote Auto Iris DC drive P-iris Field of View 4:3 Mode: Diagonal: 105° (W), 38° (T) Horizontal: 84° (W), 30° (T) Vertical: 63° (W), 23° (T) 16:9 Mode: Diagonal: 97° (W), 35° (T) Horizontal: 84° (W), 30° (T) Vertical: 47° (W), 17° (T) Audio Streaming Bidirectional (full or half duplex) Input/Output Line level/external microphone input; 600 differential, 1 Vpp maximum signal level; built-in microphone Compression G.711 PCM 8-bit, 8 kHz mono at 64 kb/s Video Video Streams Multiple simultaneous streams with up to 2 different configurations plus service stream; the secondary stream is variable based on the setup of the primary stream Available Resolutions 4:3 Aspect Ratio: 2048 x 1536 (3.0 MP) @ 9.2 Mb/s 16:9 Aspect Ratio: 1920 x 1080 (1080p) @ 6 Mb/s Supported Frame Rates Up to 30, 25, 15, 12.5, 10, 5, 1 fps (depending on the coding, resolution, and stream configuration) Video Encoding H.264 High, Main, or Base profiles; MJPEG Bitrate Control Constrained variable bit rate (CVBR), constant bit rat (CBR), and variable bit rate (VBR) with target range Stream Type Service Stream: JPEG stream Network Port RJ-45 connector for 100Base-TX Auto MDI/MDI-X Cable Type CAT5 or better for 100Base-TX Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP) Users Unicast: Up to 20 simultaneous users depending on the resolution settings Multicast: Unlimited users H.264 Security Access Password protected Software Interface Web browser view and setup Languages Supported English, French, Italian, German, Spanish, Portuguese, Russian, Chinese, Turkish Features 16 window blanks, configurable in size Password protection Snapshot with JPEG capture at 2016 x 1523 resolution Text overlays for camera name, time, date Alarm Supported Unsupervised: Detects open or closed alarm state Supervised: Detects open and short alarm state with external 1 k resistor Input 3.5 VDC maximum, 3.5 mA maximum Minimum System Requirements Processor Intel Core i3, 2.4 GHz Operating System Microsoft Windows Vista / 7 (32-and 64-bit) Mac OS X 10.4 RAM 4 GB Network Interface 100 Mb/s Monitor Minimum 1024 x 768 resolution, 16 or 32-bit color Web Browser Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later) Internet Explorer 8.0 (or later) is recommended for configuring analytics Media Player Pelco Media Player or QuickTime 7.6.5 for Windows 7, XP, or Vista QuickTime 7.6.4 for Mac OS X 10.4 (or later) Analytics Requirements For Pelco Analytics: Pelco Interface: WS5200 Advanced System Management Software on an Endura 2.0 (or later) system Open API: The Pelco API can transmit behavior alarm data to third-party applications (available on the Pelco Developer Network website) Integration Pelco System Integration Endura 2.0 (or later) Digital Sentry 7.3 (or later) DX4700/DX4800 Other Open API: Pelco API or ONVIF Profile S Mobile Application: Integrated with Pelco Mobile Application Certifications Certifications and Compliance CE (Class A), FCC (Class A), KCC, C-Tick, CB UL/cUL listed Compliant with applicable immunity sections of EN 50155, EN 50121-3-2, and EN 50121-4 Cisco Medianet Media Services Proxy 2.0 compatible ONVIF Profile S conformant MTBF 200,000 POH (reporting standard is RELEX Modeling) Power Input Power PoE (IEEE 802.3af, Class 3) Power Consumption 8.5 W nominal Current Consumption 350 mA maximum Relay Output ±32 VDC maximum, 150 mA maximum Environmental Temperature Operating: -40 to 122°F (-40 to 50°C) Storage: 14 to 140°F (-10 to 60°C) Cold Start -4°F (-20°C) Humidity Operating: 10 to 95% (condensing) Storage: 20 to 80% (non-condensing) Impact Resistance K10++ (50J) per IEC 62262 Shock and Vibration EN50155 CAT1, Class B; IEC 60068:2-6 and 2-27 General Mount Type Surface Dome Attenuation Clear: f/0.0 light loss Smoked: f/1.0 light loss Pan/Tilt Adjustment Manual: 355° pan, 180° tilt, 360° rotation Local Storage microSD (Up to 32 GB with separately sold microSDHC card) Accessory Ports and Connectors Micro USB type B connector for Pelco accessories Dimensions ( x H) 6.22 x 4.62" (15.7 x 11.7 cm) Dome Diameter 3.85" (9.77 cm) Weight 3.3 lb (1.5 kg)

“Distressed Boc”

Model

IMP319-1ES

Type

Cameras

Camera Type

Dome

MPN

IMP319-1ES

Product Type

Cameras

Brand

Pelco

UPC

700880324455