US $420
Sunnyvale, California, United States
Jun 15th
Contact Seller
Complain
Open on mobile:
New! SDA Manufacturing Laser Center/Edge Finder LC/EF-10MM 10mm Shank New! SDA Manufacturing Laser Center/Edge Finder LC/EF-10MM 10mm Shank The Laser Center/Edge Finder is a new tool for your mill that will save setup time. For the new Home Shop Machinist it will eliminate the frustrations and doubts of learning the century old Indirect Method with the conventional Edge Finders or Wiggler. The Laser Center/Edge Finder is a Direct Method center or edge finder. Current Center/Edge Finders are Indirect Methods. Current Finders require the Mill operator to determine where the edge of the material is by imposing sufficient pressure on the finder to just slightly bump the material and then move over one-half the diameter of the edge finder to locate the true edge of the material. Another accepted method is a center/edge finder that has a spring loaded conical disc that kicks sideways when touching the edge of the material and the Mill operator then moves the mill table over one-half the diameter of the edge finder to locate the true edge of the material. The mechanical/electrical center/edge finders function as the mechanical ones do except that instead of a spring loaded offset disc it utilizes electrical continuity to determine when the edge finder has contacted the material (not always useful on non-conducting material). The Mill operator hears an audible signal or a light comes on indicating contact has been made. The operator must still add half the diameter of the edge finder to determine the true edge of the material. The Laser Center/Edge Finder only requires the Mill operator to move the table under the small Laser beam until the laser light shows that the light is at the edge of the material to locate the true edge of the material. If the Mill operator is attempting to position the Mill quill to a Center Punched mark on the material, the table is moved until the laser light centers on the punched mark. In both instances this Direct Method eliminates the most common mistake of forgetting to add half the diameter of the conventional center/edge finder to locate the true edge of the material. Features: Shank Diameter: 10mm Overall Diameter: 3/4" ~ 19mm Overall Length: 3 3/8" ~ 86mm Laser Module: Class IIIa (<5mW) 640-660nm 4.5V Beam Spot Diameter: 0.1mm-0.5mm (Dependent on surface reflectivity) Batteries: (3) LR44 1.5V (Included) Includes Polarizer Details: Manufacturer: SDA Manufacturing Model: LC/EF-10MM Condition: Flawless cosmetic condition with no signs of previous use (New). Tested: N/A Warranty: 14-Day Right-of-Return SKU: 413282 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise, you are agreeing to these terms and conditions. Questions? Send us a message *** ATTENTION INTERNATIONAL CUSTOMERS *** Please be aware that the import of goods into most countries, including Canada, will incur taxes, import duties, brokerage fees and/or other charges upon delivery. These fees are additional to (not included in) any item or shipping costs displayed on the listing page. We are unable to provide any detailed information regarding these fees within our listings. We strongly recommend contacting the carrier/local customs office PRIOR to ordering, so you can get an estimate of any potential fees, and know what to expect when your order arrives. If you have any questions, we would be more than happy to help. Thank you! SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing, if it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days, the item(s) will be re-listed at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal, All Major Credit Cards, and Bank Wire Transfers in USD (There is a $25 wire transfer fee). A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax form is provided for our records. We cannot process the order until we receive sales tax or a copy of your CA BOE-230. If you would like to pay using a credit card, please call us at (408) 743-5609. Click Here for Payment and Purchase Policies ** Resellers Click Here ** WARRANTY: *Please see listing above for the warranty that applies to this item. AS-IS, No Warranty: When an item is stated as being AS-IS, the condition of the item is either unknown or has known issues (as stated in the description) and does NOT carry any warranty. NO returns will be accepted for this item. 14-day Right-of-Return: You have fourteen (14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment, or warranty items that have been modified or altered. We maintain the right to use our discretion when choosing between a replacement or refund. 30-day Warranty: When an item carries a 30-day warranty, you have 30-days to contact us for a replacement or refund for a defective product. We can not warranty compatibility with your equipment, or warranty items that have been modified or altered. RETURNS: NOTE: Original shipping charges are Non-Refundable. Customer is responsible for all return shipping charges. Defective/DOA: We accept returns for Defective/DOA items within 14 days of receipt by the customer. If you receive an item that is damaged or defective, please contact us as soon as possible, and we will, at our discretion, refund or replace the item. The customer is responsible for all return shipping charges. Right-of-Return: If you purchase an item, and decide within 14 days, that you no longer wish to keep it, we will accept it back for a refund, less a 15% restocking fee. This includes items that end up not being compatible or are simply the wrong part. You are responsible to determine compatibility before you purchase. For Right-of-Returns, items are expected to be in the same condition they were in when they left our warehouse. The customer is responsible for all return shipping charges. Free Shipping Returns: If you purchase an item with free shipping, and it is returned for a refund, the original shipping cost that we incurred will be deducted from the total refund. Return Shipping: The customer is responsible for all return shipping charges. SHIPPING: PLEASE NOTE: All shipping rates are calculated based on an estimation of the items packed weight. We will always make our best effort to adjust this rate once we know where the item is being shipped, and your invoice will reflect this. If for any reason you feel that the rates are higher than they should be, please feel free to contact us, and we would be more than happy to re-assess the charges. Additionally, if you purchase several items, eBay's combined shipping calculator rarely produces an accurate estimation of combined shipping weight, so please contact us and we will make any necessary corrections. SHIPPING DETAILS: All items will be securely packaged or palletized. Most items will be shipped within 1 business day. For items that require freight shipping, please allow up to two days for an invoice. All tracking information will be forwarded to the email address associated with your PayPal or eBay account. DOMESTIC SHIPPING: A contact name, phone number and company name are required for shipping purposes; items may not ship unless this is provided. In the event that the bidder/buyer would like to handle the shipping arrangements, please provide us with your FEDEX or UPS account number. Please Note: There will be a $4 pick-up fee charged for FedEx shipping. INTERNATIONAL SHIPPING: Please allow a 24 hour response time due to time difference. A contact name, phone number and company name are required for shipping purposes; items may not ship unless this is provided. In the event that you have questions about shipping logistics please contact us at (408)743-5609 before purchasing. International orders may be subject to Duties, Taxes or other Import Fees. The bidder/buyer is solely responsible for these fees, documents and transportation if held at a customs office in the destination country. FREIGHT: We will handle all of the preparations for freight shipments, ie: palletizing, shrink wrapping, etc. If you purchase an item that requires freight shipping, please allow two days to receive an updated invoice. Please let us know if there will be a loading dock or forklift at the delivery address. If you have any questions, please feel free to message or call us directly at (408)743-5609. FEEDBACK: It is our Mission to assure that all of our customers are 100% satisfied with their purchases. Should there ever be a problem, we ask that you contact us immediately, so that we can correct the problem as soon as possible. THANK YOU! Copyright © 2016 WeirdStuff.com Powered by SixBit's eCommerce Solution
