YOU ARE BUYING ONE NEW SEA FC-DV2 FULL FACE MASK CL WITH DV2 FOR SE400 POSITIVE-PRESSURE DEMAND RESPIRATOR SYSTEM. WHAT IS PICTURED IS WHAT IS INCLUDED IN THIS AUCTION. SEE OUR STORE FOR REPLACEMENT SEA CARTRDIGES FOR THE SE400 AND OUR AUCTION FOR A COMPLETE SE400 SYSTEM AS WELL! THIS IS NEW IN BOX SURPLUS AND IS GUARANTEED WORKING. (CONTX1 +3BROKEN?) WE NO LONGER HAVE THE SEA ABEK3HE-DP-T CARTRIDGE FILTERS IN STOCK BUT WE DO STOCK SOME FILTERS THAT WILL FIT THIS UNIT. ANY FILTER WITH A 40MM THREAD WILL FIT. SEE OUR STORE FOR A COMPLETE SCBA SE400 SYSTEM AND FILTER REPLACEMENTS! International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior. FOR MORE INFORMATION SEE: http://www.sea.com.au/2007_web/prod_se4/se4_sys_fan.htm All the air you need The SE400 gives you true positive pressure air up to and in excess of 400 litres per minute. Conventional fan-assisted respirators give you a mere 120-180 l/min. Big savings on filters The SE400 is not a continuous-flow respirator. Air passes through the filters only as you need it. That's why the SE400 uses 50% less filters on average, compared to other fan-driven respirators. Know what's happening With the SE400, you will always know that you are getting the protection you need. Visual and audible alarms alert you to any routine task (such as changing the battery), as well as other events that may require your attention. Communication Voice transmission is loud and clear. SE400 comes with a microphone in the mask and a powerful external loudspeaker. You can even use it with a 2-way radio. Single button operation Put it on. Breathe. It couldn't be easier. Face pieces to suit YOU Select half or full face masks in several sizes and materials. Wear it the way you want The SE400 can be worn on a backpack, waist harness or standard belt. Fit the hose over your shoulder or around your side. Suitability The SE400 can be worn inside suits of various materials, ranging from disposable dust suits to fully encapsulated gas suits. All suits can be pressurised by the SE400. Lots of accessories Full range of filters Dust, spray, splash and spark hoods Spark- and flameproof hose sleeves Welding visors for full face masks Backpacks, padded waist belts, harnesses with braces Clear tear-off visor film for spray work Spectacle inserts for full masks, including prescription glasses, low-light lenses, sun shades, etc. Hi-tech operation Micro-processor driven fan operation Continuous self-diagnostics Instant user alerts in case of pressure-drop, motor malfunction, low batteries etc. Can be programmed to alert user when filters need changing Usage information: entire usage history of the respirator is recorded and time-stamped. Can be downloaded to PC for documentation and further analysis Description: Positive-pressure demand respirator. The respirator is microprocessor controlled and supplies positive pressure breathing air even at very hard work. The SE400 features in-mask communication, a comprehensive warning system, and a usage log which can be downloaded to a personal computer for further analysis. Product name: SE400AT-2 Use: Used for SCBA-level protection (with full face mask) in filtrable, non-IDLH atmospheres with an oxygen content sufficient for human breathing Face pieces : Half mask — silicone material available in 3 sizes: Small/Medium Medium/Large Large Full face mask — available in three materials: Silicone Chloroprene Natural rubber The face pieces contain no electrical parts, and feature an internal pressure sensor, internal microphone, and a warning light in the user's field of vision Regulator: Flow capability of peak inhalation air flow in the inner ori-nasal mask of 400 l/min or higher. Breath responsive: air supply continuously adjusts itself to user's air requirements 7—14 mBar supply pressure Easy service — no tools Tested for equivalent of 3 years' harsh condition Acts as negative pressure filter respirator if positive pressure is lost (e.g. battery runs out) Communication: All face pieces feature a built-in microphone which connects through the fan unit to an external miniature loudspeaker Fan unit: Single button operation Auto power-off when removing mask LED light indicators Com-port for loudspeaker or personal computer Brush-less DC motor Continuous monitoring of motor function Microprocessor controlled motor Demist mode provides the user rapid supply of extra air for 20 seconds that not only cools the user's face but also demists the visor of the full face mask User alarms: The user immediately receives both audible and visual alarms (through a siren and a warning light in the user's field of vision) upon a range of events, such as: Filter change required Low battery power Mask pressure dip Various other system alerts Power supply: 2-hour battery recharge Ni-Mh battery technology — no memory effect Approximately 4 hours' operation at medium work load Microprocessor controlled battery charger for long life and battery maintenance Data log: Fan unit continuously records and time-stamps all vital system information, including: All alarms issued Total air volume drawn through the filters Power on/off Mask removed NOTE: The use of the data log feature is completely optional, and is in no way necessary for the general operation of the SE400AT-2 Software: Data log and real-time system monitoring software is included as a simple-to use Windows application. NOTE: The use of the software is completely optional, and is in no way necessary for the general operation of the SE400AT-2 Computer interface: Standard serial port Carry devices: The unit can be worn in a variety of ways, with the breathing hose either around the side of the body, or over the shoulder: On a conventional waist belt On the standard waist belt (supplied) On a padded extra strength waist harness with or without shoulder braces (optional) On a back pack with padded shoulder straps and waist harness (optional) Weight: SE400 with full face mask and particle filters: 2.93 kg (6.46 lbs) SE400 with full face mask and DP filters: 3.62 kg (7.98 lbs) Accessories: Note: for pictures of many accessories, look up the Product Menu A range of practical accessories include: Hoods: Cloth flame/spark resistant welding hood with inner bib Cloth flame/spark resistant welding hood without inner bib Cloth flame/spark resistant welding cover for breathing hose Clip-on welding visor for full face mask Tyvek disposable hood with inner bib Tyvek disposable hood without inner bib Tyvek disposable cover for breathing hose PVC hood without bib Carrying devices: Back pack Padded waist belt (long or short) with braces Padded waist belt (long or short) without braces Head harnesses: Cloth head harness for full face mask Cloth head harness for full face mask, suitable for use with hard hat Spectacle inserts: Spectacle insert for full face mask Protective suits: Tyvek disposable dust suit PVC fully encapsulated suit PE-coated Tyvek disposable chemical suit Tyvek F disposable chemical suit Pressurization hose Visors for full face mask: Polycarbonate (standard) Heat resistant visor Laminated glass Disposable clear visor covers Other: Belt attachment for SE-Talk communication unit Test half face pieces (3 sizes) for performing face piece fit tests Cloth storage bag for full face mask Storage: Store at room temperature in clean, dry place
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
