+ Post new Ad
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 0
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 1
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 2
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 3
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 0
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 1
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 2
NEW STARRETT "A" CLAMP NO 164C-4" INCH, US $250 – Picture 3

New Starrett "a" Clamp No 164c-4" Inch

US $250

  • Toms River, New Jersey, United States
  • Jun 9th
Open on mobile:
QR code
Other similar products Starretts unique, patented "A" clamp design combines great strength and generous throat depth in a compact overall size, with no obtrusive projections. The clamps are versatile and easy to use, designed for every machine shop and tool room. Cam Powered Light clamping requires only thumb pressure on the cam stop pin. The design provides a strong leverage ratio that is better than any comparable clamp. If stronger force is desired, it can be achieved by turning the eccentric center pivot pin, using a hex socket wrench after the clamp is adjusted and set. Adaptability The hardened pads, clamp firmly on nonparallel and uneven surfaces, with no twisting of workpieces or "walking" of the pads. The clean contour of the clamp permits the use in space-restricted areas where other types could not be used. Universal Applications These rugged clamps fit virtually all clamping needs with more versatility than conventional "C" clamps or parallel clamps. Safety The absence of a protruding screw and T-handle, the source of many scrapes and bruises, contributes to a safer workplace. The 164C-4" opens to 4" inch  3" inch throat depth. Check out my other items! Be sure to add me to your favorites list!

Directions

Similar products from Clips & Jaws

Jorgensen Drop Forged 6” Steel C Clamp 406

Jorgensen Drop Forged 6” Steel C Clamp 406

  • Fort Worth, Texas, United States
  • Jun 9th
SMITH BLAIR REPAIR CLAMP 227-00066312-001

SMITH BLAIR REPAIR CLAMP 227-00066312-001

  • Sunman, Indiana, United States
  • Jun 9th
J.H. Williams #8 Vulcan Heavy Duty C Clamp, Capacity: 4.25"-8.5" Opening

J.H. Williams #8 Vulcan Heavy Duty C Clamp, Capacity: 4.25"-8.5" Opening

  • Clatskanie, Oregon, United States
  • Jun 9th
BESSEY 700 lb. Auto-Adjusting Toggle Clamp and Vertical Handle with Flanged Base

BESSEY 700 lb. Auto-Adjusting Toggle Clamp and Vertical Handle with Flanged Base

  • Oxnard, California, United States
  • Jun 9th
CH Hanson 10100 10" Automatic Locking Pliers - Curved Jaw New

CH Hanson 10100 10" Automatic Locking Pliers - Curved Jaw New

  • Mississauga, ON, Canada
  • Jun 9th
YALE C-Clamp/Press 11" Open, 4" Throat, Yale Double Screw 228XS77 Dated 8-7-57

YALE C-Clamp/Press 11" Open, 4" Throat, Yale Double Screw 228XS77 Dated 8-7-57

  • Logan, Iowa, United States
  • Jun 9th
COOPER TOOLS 650-0311 650-0525 CAM / PAD & WASHER CLAMP PARTS LOT OF 4 NIB

COOPER TOOLS 650-0311 650-0525 CAM / PAD & WASHER CLAMP PARTS LOT OF 4 NIB

  • Aurora, Indiana, United States
  • Jun 9th
Victor® Clip'en PenPencil Clip 1 15"x1 15"Plastic Asst Colors 4Pk 2 Packs

Victor® Clip'en PenPencil Clip 1 15"x1 15"Plastic Asst Colors 4Pk 2 Packs

  • Hickory Hills, Illinois, United States
  • Jun 9th
Machinist Clamps, Lathe Face Plate Clamps, Tapped End Clamps, Work Holding Clamp

Machinist Clamps, Lathe Face Plate Clamps, Tapped End Clamps, Work Holding Clamp

  • Rochester, New York, United States
  • Jun 9th
DE-STA-CO Toggle Clamp 215-U Delrin 1/2" spacer 1" Neoprene Swivel Head

DE-STA-CO Toggle Clamp 215-U Delrin 1/2" spacer 1" Neoprene Swivel Head

  • Cotopaxi, Colorado, United States
  • Jun 9th
CLAMP MFG Set of 2 KANT-TWIST 405 2" T-HANDLE MACHINISTS CLAMP

CLAMP MFG Set of 2 KANT-TWIST 405 2" T-HANDLE MACHINISTS CLAMP

  • Clare, Michigan, United States
  • Jun 9th
Carr Lane Toggle Clamps LOT 450-HTC 150-SPC 450-VTC 150- TPC 50-SPC 250-TPC

Carr Lane Toggle Clamps LOT 450-HTC 150-SPC 450-VTC 150- TPC 50-SPC 250-TPC

  • Chino, California, United States
  • Jun 9th
JG williams 2A vulcan and 2 clamps

JG williams 2A vulcan and 2 clamps

  • Trenton, New Jersey, United States
  • Jun 9th
Kanttwist Clamps

Kanttwist Clamps

  • Elgin, Illinois, United States
  • Jun 9th
ALUMINUM CLAMPING CLAMP HOLD DOWN VISE MACHINIST LATHE TOOLS

ALUMINUM CLAMPING CLAMP HOLD DOWN VISE MACHINIST LATHE TOOLS

  • Bradenton, Florida, United States
  • Jun 9th
Irwin 225123 Quick-Grip C-Clamp-2X3-1/2 DEEP C-CLAMP

Irwin 225123 Quick-Grip C-Clamp-2X3-1/2 DEEP C-CLAMP

  • Indianapolis, Indiana, United States
  • Jun 9th
CENTRAL FORGE HEAVY DUTY CLAMP 20" (RED)

CENTRAL FORGE HEAVY DUTY CLAMP 20" (RED)

  • Salina, Kansas, United States
  • Jun 9th
Vintage L.S. STARRETT Co. 161-B Small Toolmaker Machinist Parallel Clamp

Vintage L.S. STARRETT Co. 161-B Small Toolmaker Machinist Parallel Clamp

  • Danville, Indiana, United States
  • Jun 9th
Adjustable No 1440-4" 1450-5" 1460-6" C Clamps 1 Each Three 3 Total Used Rusty

Adjustable No 1440-4" 1450-5" 1460-6" C Clamps 1 Each Three 3 Total Used Rusty

  • Hemet, California, United States
  • Jun 9th
Red Silver Tone Short Bar Flanged Base Horizontal Toggle Clamps 27Kg 60 Lbs 4pcs

Red Silver Tone Short Bar Flanged Base Horizontal Toggle Clamps 27Kg 60 Lbs 4pcs

  • US, United States
  • Jun 9th

People who viewed this item also vieved

GIBRATAR 52 Piece M12x1.75 12mm T Slot Step Block & Clamp Fixture Clamp Set 1V

GIBRATAR 52 Piece M12x1.75 12mm T Slot Step Block & Clamp Fixture Clamp Set 1V

  • Saint Louis, Missouri, United States
  • Jan 30th
PARALLELS - 3 MATCHED SETS

PARALLELS - 3 MATCHED SETS

  • Fort Wayne, Indiana, United States
  • Jan 30th
MACHINIST LATHE MILL Machinist Lot of Parallel Hold Down Set Up Block s

MACHINIST LATHE MILL Machinist Lot of Parallel Hold Down Set Up Block s

  • Morris Plains, New Jersey, United States
  • Jan 30th
Double Slide Indexable Tailstock Chuck (Inv.29957)

Double Slide Indexable Tailstock Chuck (Inv.29957)

  • Portland, Connecticut, United States
  • Jan 30th
MT3 HIGH SPEED LIVE CENTER B-TYPE

MT3 HIGH SPEED LIVE CENTER B-TYPE

  • Chino, California, United States
  • Jan 30th
Drive Dog 3 1/2" Armstrong Vulcan Williams Made in USA

Drive Dog 3 1/2" Armstrong Vulcan Williams Made in USA

  • Belleville, Michigan, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Small Micro Jewelers Lathe Spanner Wrench for Chuck

MACHINIST TOOLS LATHE MILL Small Micro Jewelers Lathe Spanner Wrench for Chuck

  • Morris Plains, New Jersey, United States
  • Jan 30th
Craftsman 109 Lathe 3 Jaw Chuck with matching reverse jaws

Craftsman 109 Lathe 3 Jaw Chuck with matching reverse jaws

  • Edgecomb, Maine, United States
  • Jan 30th
8” BORING RING CNC LATHE CHUCK SOFT TOP JAWS BORE JAW

8” BORING RING CNC LATHE CHUCK SOFT TOP JAWS BORE JAW

  • Chino, California, United States
  • Jan 30th
ERICKSON CV40TG100400 TG-100 COLLET CHUCK, CAT-40

ERICKSON CV40TG100400 TG-100 COLLET CHUCK, CAT-40

  • Euclid, Ohio, United States
  • Jan 30th
TOS 10" D1-6 3 JAW STANDARD BODY CHUCK 250/3-2-MI

TOS 10" D1-6 3 JAW STANDARD BODY CHUCK 250/3-2-MI

  • Roanoke, Virginia, United States
  • Jan 30th
Atlas 16C Power Pull Back Collet Chuck A2-5 Mount CPB-16CA5 Fits Haas Mazak

Atlas 16C Power Pull Back Collet Chuck A2-5 Mount CPB-16CA5 Fits Haas Mazak

  • Columbus, Ohio, United States
  • Jan 30th
SET OF 6 HARDINGE 5C ROUND COLLETS SIZES 5/64" -33/64" ALL 64THS

SET OF 6 HARDINGE 5C ROUND COLLETS SIZES 5/64" -33/64" ALL 64THS

  • Ellington, New York, United States
  • Jan 30th
SET OF 4 HARDINGE 5C ROUND COLLETS SIZES 3/32"-13/32" ALL 32NDS

SET OF 4 HARDINGE 5C ROUND COLLETS SIZES 3/32"-13/32" ALL 32NDS

  • Ellington, New York, United States
  • Jan 30th
HARDINGE #3 W&S 7/8" ROUND COLLET PADS

HARDINGE #3 W&S 7/8" ROUND COLLET PADS

  • Wadley, Alabama, United States
  • Jan 30th
Hofmann CNC 4th & 5th Axis 25" dia Indexer Rotary Table MPRS-NC630 Fanuc Motors

Hofmann CNC 4th & 5th Axis 25" dia Indexer Rotary Table MPRS-NC630 Fanuc Motors

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
11-1/2" x .46" Faceplate Plate

11-1/2" x .46" Faceplate Plate

  • Flint, Michigan, United States
  • Jan 30th
Heavy Duty "T" Slotted Steel Machine Riser Table with 1/2" "T" Slots 27"x40"x17"

Heavy Duty "T" Slotted Steel Machine Riser Table with 1/2" "T" Slots 27"x40"x17"

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
Electron SH1 Bushing 1" Bore - NEW

Electron SH1 Bushing 1" Bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
CEDARBERG 8706-001 TABLE GUARD & TOTE 1 SET OF 2 TRAYS

CEDARBERG 8706-001 TABLE GUARD & TOTE 1 SET OF 2 TRAYS

  • Roanoke, Virginia, United States
  • Jan 30th
OTT Jakob Spanntechnik Hydraulic Unclamping Unit LE 95.101.791.2.2 Tool Changer

OTT Jakob Spanntechnik Hydraulic Unclamping Unit LE 95.101.791.2.2 Tool Changer

  • Bardstown, Kentucky, United States
  • Jan 30th
Tsudakoma 15-3/4 Inch Rotary Table

Tsudakoma 15-3/4 Inch Rotary Table

  • Portland, Connecticut, United States
  • Jan 30th
Camco Ferguson Model: 425RD12H24-90 Radial Indexer <

Camco Ferguson Model: 425RD12H24-90 Radial Indexer <

  • Phoenix, Arizona, United States
  • Jan 30th
Camco Ferguson Model: 500RPP90A Radial Indexer &lt;

Camco Ferguson Model: 500RPP90A Radial Indexer <

  • Phoenix, Arizona, United States
  • Jan 30th
COLUMBIAN C 43-1/2 SWIVEL BENCH VISE ANVIL HARDY TOOL

COLUMBIAN C 43-1/2 SWIVEL BENCH VISE ANVIL HARDY TOOL

  • Kewaunee, Wisconsin, United States
  • Jan 30th
Machinists12/23A USA Gemeral Pin Vise #2

Machinists12/23A USA Gemeral Pin Vise #2

  • Lutz, Florida, United States
  • Jan 30th
Machinists12/23A USA Gemeral Pin Vise #1

Machinists12/23A USA Gemeral Pin Vise #1

  • Lutz, Florida, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies