NEW Yokogawa EJA430A Pressure Transmitter DP Hart w/ Chemical Seal Measuring Sys, US $760.00 – Picture 0

NEW Yokogawa EJA430A Pressure Transmitter DP Hart w/ Chemical Seal Measuring Sys, US $760.00 – Picture 1

NEW Yokogawa EJA430A Pressure Transmitter DP Hart w/ Chemical Seal Measuring Sys, US $760.00 – Picture 2

NEW Yokogawa EJA430A Pressure Transmitter DP Hart w/ Chemical Seal Measuring Sys, US $760.00 – Picture 3

NEW Yokogawa EJA430A Pressure Transmitter DP Hart w/ Chemical Seal Measuring Sys, US $760.00 – Picture 4

NEW Yokogawa EJA430A Pressure Transmitter DP Hart w/ Chemical Seal Measuring Sys, US $760.00 – Picture 5

New Yokogawa Eja430a Pressure Transmitter Dp Hart W/ Chemical Seal Measuring Sys

US $760.00

Hampton, Virginia, United States
Mar 7th

Open on mobile:
QR code

New Yokogawa DP harp Pressure Transmitter With Chemical Seal Measuring System with Capillary (see pictures) A chemical seal measuring system is made up of a diaphragm seal attached to a pressure measuring instrument (pressure transmitter). This systems also include a capillary separating the diaphragm seal and measuring instrument which allows for remote reading. In all cases, the components of the chemical seal measuring system must not be separated. The chemical seal measuring system transmits pressure hydraulically from the chemical seal diaphragm to the measuring instrument via a system fill. even very small leaks of the hydraulic fluid from the system will lead to inaccurate measurements or failure of the chemical seal system Model EJA 430A Style S4 Suffix FAS5B-92EA/FF15/A/D1/N5 YP089-A F (Digital communication (FOUNDATION Fieldbus protocol)) A (0.03 to 3 MPa {0.3 to 30 kgf/cm2}) S (Body: SCS14A; Capsule: SUS316L; Vent plug: SUS316) 5 (without process connector (1/4 NPT female on the cover flanges) B (SUS630 Maximum working pressure: [A capsule:3 MPa {30 kgf/cm2} ], [B capsule]: 14 MPa {140 kgf/cm2}) 9 (Horizontal impulse piping type, left side high pressure) 2 (1/2 NPT female, two electrical connections without blind plug) E (Digital indicator with the range setting switch) A (SECC Carbon steel 2-inch pipe mounting (flat type)) Optional specification: FF1 (Factory Mutual (FM)): FM Explosionproof Approval *1 Explosionproof for Class I, Division 1, Groups B, C and D Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G Hazardous (classified) locations, indoors and outdoors (NEMA 4X) Temperature class: T6 Amb. Temp.: –40 to 60 C (–40 to 140 F) A (Lightning Protection): Transmitter power supply voltage: 10.5 to 32 V DC (10.5 to 30 V DC for intrinsically safe type, 9 to 32 V DC for FOUNDATION Fieldbus and PROFIBUS PA communication type.) Allowable current: Max. 6000 A (1 40 µs), Repeating 1000 A, 100 times D1 (Calibration units) P calibration (psi unit) N5 ? Supply voltage 24V DC MWP 430 PSI Calibration Range: 0 to 75 PSIG Assembled in USA with parts from Japan No. JEJAXC452 F9341KA-J Surge Protector, 28V Model No. 1669-06 Explosionproof The EJA-A series is Yokogawa's most successful pressure transmitter line. First released in 1991, it continues to offer high performance and high reliability for any application. With an installed base of over 4-1/2 million EJA-A transmitters worldwide, it has a proven track record that makes it a true industry workhorse. The remote seal Diaphragm Measurement System is commonly used when process-operating conditions extend beyond the normal operating limits of a pressure transmitter. In addition, they are used to reduce the weight of the device at the process connection, particularly with conventional pressure transmitters. The lightweight design of DPharp pressure transmitters combined with a robust direct-mounting system provide an excellent solution for both close-coupled and remote seal applications. For service where one or more of the following conditions exist: High temperature Clogging potential Frequent cleaning requirements Aggressive or abrasive processes ANSI flanged including flush and extended process connections NPT threaded process connections Sanitary connections including aseptic, gpc quick connect, tri-clamp, cherry burrell, and tank spud. Saddle seal for welding into pipe line. The diaphragm is completely welded, with general construction conforming to methods described in ASME standard B20.2-1991 section 2.3 PLEASE ask questions before bidding. Please look at pictures carefully. I provided specifications listed above to the best of my ability; please verify all specifications based on the photographs provided.

“New with open box. See pictures for condition”

Brand	Yokogawa
Model	EJA 430A