US $160
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Primary Application(s) | Face Milling, Speciality Cutting |
Flutes | 3-Flute | ||
Material | Cobalt | ||
Cutting Diameter | 1-1/4" | ||
Coating | TiCN | ||
Shank Diameter | 1-1/4" | ||
End Type | Single End | ||
Overall Length | 6-1/2in. | ||
Brand | Niagara Cutter | ||
Quantity | 1 | ||
Model | EDP#33919 |
Directions
Similar products from End Mills Router & Drill Bits
10Ps 3/16x3/8x1/2x2-3/8" M42 8% Cobalt 4 Fl End Mill, Center Cutting, #CO-316x10
5 Pcs of 1/2"x1/2"x1-1/4"x3-1/4" M42 HSS+8%Cobalt 4 Flute End Mill, #CO-12x5
PCT/GW 3/4" 4 FLUTE TiAIN Coated Carbide End Mill .187 Radius "BRAND NEW"
PCT/GW 5/8" 5 FLUTE TiAIN Coated Carbide End Mill,Ext. Neck "BRAND NEW"T41007504
3/4"x3/4x1-1/2"x4-1/8" 2 Flute Carbide Tipped End Mill for Aluminum, #0193-6483
3/4" 4 Flute M42 8% Cobalt TiAlN Roughing End Mill, Standard Tooth, #1102-0034
Lot 5pcs Solid Carbide Coating TiAlN 2-Flute EndMill Dia 1.0mm Shank Dia 4mm
Lot 5 Flute Rougher End Mill Drill Bit Putnam/mhc/Onyx/OSG
NIAGARA 3/8,1/4,1/8,3/32 4 FL DOUBLE END AITiN End MillS "BRAND NEW" QTY 4
TTC 3/8" 3 Flutes TiCN HSS Rough End Mill "BRAND NEW" 08-193-060 QTY. 2
1/8" 4 FLUTE 90 DEGREE POINT ANGLE CARBIDE DRILL MILL
IMCO 1/2" 4 FLUTES CARBIDE 4" Long-Single End-END MILL "BRAND NEW" PN:97332
12" 4 Flutes CARBIDE End Mil Double Endl "BRAND NEW" MADE IN USA
Niagara 1/2" 4 FL Carbide C430 SINGLE End 4" Long TiALN Ball End Mill EDP# 53996
TTC 1-1/4" 3 Flutes 6-1/2" Long HSS Rough End Mill "BRAND NEW" 08-193-140
3/32" 4FL DOUBLE END STUB LENGTH CARBIDE END MILL
NIAGARA 1/2" 4 FL DOUBLE END AITiN End Mill "BRAND NEW" EDP# N89901
SGS 3/32" 4 FLUTE Double End TiAIN Carbide End Mill "BRAND NEW" 39609 Qty 2
SGS 3/8" 4 FLUTE Single End Carbide End Mill "BRAND NEW" 30147 Qty 2
SGS 3/8" 4 Flute Single End 4" Long Carbide End Mill "BRAND NEW" 33127
People who viewed this item also vieved
SANDVIK 490R-08T308E-MM 1040 Insert
HORIZON TOP NOTCH O-RING FACE GROOVE CARBIDE INSERTS
Lot of (10) Noga EO1000 Disposible Deburring Tool Edge Off New
4000+ dxf files on 1gb USB Dongle for Laser cnc machines wood metal, Huge range
(#5066) New Machinist USA Made .3960 Inch Chucking Reamer
(#5068) New Machinist USA Made .440 Inch Chucking Reamer
VINTAGE,Marked NO. OX METAL PUNCH,PAT JAN.21,19 / Parker Kalon Corp.,N.Y.,U.S.A.
Roper Whitney N0. XX Hand Punch w/Plastic Case and 7 sets DIes / Punches
GLOBUS 4" X 3/32" X 1" SLITTING SAW WITH SIDE CHIP CLEARANCE 36 TEETH
CLEVELAND 4"x1/8"x1" STRAIGHT SIDE TOOTH SLITTING SAW 36TEETH
NTK SRG 423 Ceramic inserts 10 pac
Kaiser 10.938.837 TP071205CBN Cubic Boron Nitride Boring Insert
1x SC16UU SCS16UU Size 16mm Linear Motion Ball Bearing Slide Bushing HPP
1x SC20UU SCS20UU Size 20mm Linear Motion Ball Bearing Slide Bushing HPP
DUMONT 12MM METRIC D BROACH + ASSORTED SHIMS
DUMONT 14MM METRIC D BROACH + ASSORTED SHIMS & 42MM BUSHING
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies