Norton IM9 Crystolon 61463685970 multioil 1/2" x 11-1/2" x 2-1/2" Grit 320 Stone, US $35.00 – Picture 0

Norton IM9 Crystolon 61463685970 multioil 1/2" x 11-1/2" x 2-1/2" Grit 320 Stone, US $35.00 – Picture 1

Norton IM9 Crystolon 61463685970 multioil 1/2" x 11-1/2" x 2-1/2" Grit 320 Stone, US $35.00 – Picture 2

Norton Im9 Crystolon 61463685970 Multioil 1/2" X 11-1/2" X 2-1/2" Grit 320 Stone

US $35.00

Chesapeake, Virginia, United States
Feb 12th

Open on mobile:
QR code

BRAND NEW The Norton IM9 India fine-grit replacement oilstone for the IM313 sharpening system is made of 320-grit aluminum oxide, suitable for sharpening and maintaining steel cutting edges; it produces durable, smooth-cutting edges and is preferred for close tolerances. The stone is prefilled with oil to save time and eliminate the need to presoak it prior to use. The oil prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips. This oilstone is commonly used to replace a stone in the Norton IM313 sharpening system, or as a bench stone, to restore cutting edges on straight-edged tools such as chisels, knives, plane blades, and precision instruments. This aluminum oxide stone has a tough fracture- and wear-resistant grit that is more durable than silicon carbide and capable of sharpening to very close tolerances. It is created by grading aluminum oxide to a consistent particle size and blending it with bonding agents. It is then molded and surface-finished. Unusually large dimensions of 1/2 x 11-1/2 x 2-1/2 inches (H x W x D) make this stone suitable for bench use. (H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) Like most oilstones, it is harder and more durable than a waterstone. It conforms to the American National Standards Institute (ANSI) abrasive grit standards. Sharpening stones, or whetstones, are abrasive surfaces used to sharpen and hone the edges of steel cutting implements, such as chisels, knives, scissors, hand scrapers, and plane blades. Sharpening is the process of creating or re-establishing a cutting edge by grinding away portions of the metal to adjust the angle of the edge and reform the shape. Honing removes small imperfections. Stones can be flat, for working flat edges, or shaped, for edges that are more complex. Sharpening stones are made of natural or synthetic materials that range from softer to harder, and are categorized by the size of their abrasive particles, known as grit. A stone with a coarser grit is used when more metal needs to be removed (e.g., when sharpening a nicked or very dull blade); the stone with the finest grit produces the sharpest edge. Where numbers are assigned to specify grit, they range from coarser grit (low) to finer grit (high). Some sharpening stones are designed for use with a lubricating liquid, some can be used dry, and others can be used either wet or dry. When used with lubricating liquid, a sharpening stone can be called a waterstone or an oilstone, based on the lubricant required. Specifications - 320-grit for sharpening and maintaining cutting edges - Silicon carbide sharpens to moderate tolerances with minimal loading when it is more important to sharpen the blade quickly than to produce a fine cutting edge - Prefilled with oil to allow lubricant to stay on surface during sharpening - 1/2 x 11-1/2 x 2-1/2 inch (H x W x D) size makes this stone suitable for use as a bench sharpener for knives and tools - Oilstone is more durable and harder than a waterstone THANKS for looking and check my other items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Norton
Model	IM9