Notifier Monitor Module Addressable W/ Flashscan FMM-1, US $149.99 – Picture 0

Notifier Monitor Module Addressable W/ Flashscan FMM-1, US $149.99 – Picture 1

Notifier Monitor Module Addressable W/ Flashscan Fmm-1

US $149.99

El Monte, California, United States
Jan 30th

Open on mobile:
QR code

NOTIFIER..MONITOR MODULE ADDRESSABLE WITH FLASHSCAN..MODEL FMM-1..MODEL 64008..IVORY FINISH...FOR NOTIFIER'S INTELLIGENT CONTROL PANELS ..MAKE YOUR OFFER AND SAVE MONEY I combine shipping in most of my auctions..just send a email with the items you want and i give discount on shipping ..I'M APPRECIATE EVERY CUSTOMER WHO BUY IN MY AUCTION, AND I GIVE THANKS FOR ALL MY CUSTOMERS. , i'm a honest seller, and i stated in my auction, all the information i have, the shipping time, and the most important if you have a problem with the item contact with me, the negative feedback will last in my profile about one year, please don't abuse of the feedback, if you have a problem send a email and explain what is the problem, and i will fix the problem, .. please read everything, and don't buy if you feel my auction is not right for you FEATURES NOTIFIER MONITOR MODULE ADDRESSABLE WITH FLASHSCAN MODEL FMM-1 IVORY FINISH 428097 ASSEMBLED IN USA FOR NOTIFIER'S INTELLIGENT CONTROL PANELS MONITOR MODULE SUPERVISE A CIRCUIT OF DRY-CONTACT INPUT DEVICES, SUCH AS COVENTIONAL HEAT DETECTORS AND PULL STATIONS, OR MONITOR AND POWER CIRCUIT OF TWO-WIRE SMOKE DETECTORS (FZM-1) FMM-1 MONITOR MODULE IS A STANDAR-SIZED MODULE (TYPICALLY MOUNTS TO A 4" (10.16CM) SQUARE BOX THAT SUPERVISES EITHER A CLASS A (STYLE D) OR CLASS B (STYLE B) CIRCUIT OF DRY-CONTACT INPUT DEVICES BUILT-IN TYPE IDENTIFICATION AUTOMATICALLY IDENTIFIES THIS DEVICE AS A MONITOR MODULE TO THE CONTROL PANEL POWERED DIRECTLY BY TWO WIRE SLC LOOP. NO ADDITIONAL POWER REQUIRED HIGH NOISE (EMF/RFI) IMMUNITY SEMS SCREWS WITH CLAMPING PLATES FOR EASE OF WIRING DIRECT DIAL ENTRY OF ADDRESS: 01- 159 ON FLASHSCAN SYSTEMS: 01 - 99 ON CLIP SYSTEMS., 01-99 ON LED FLASHES GREEN DURING NORMAL OPERATION ( THIS IS A PROGRAMMABLE OPTIO) AND LATCHES ON STEADY RED TO INDICATE ALARM THE FMM-1 MONITOR MODULE IS INTENDED FOR USE IN INTELLIGENT TWO-WIRE SYSTEMS, WHERE THE INDIVIDUAL ADDRESS OF EACH MODULE IS SELECTED USING THE BUILT-IN ROTARY SWITCHES IT PROVIDES EITHER A TWO-WIRE OR FOUR-WIRE FAULT-TOLERANT INITIATING DEVICE CIRCUIT (IDC) FOR NORMALLY-OPEN-CONTACT FIRE ALARM AND SUPERVISORY DEVICE THE MODULE HAS A PANEL-CONTROLLED LED INDICATOR THE FMM-1 CAN BE USED TO REPLACE MMX-1 MODULES IN EXISTING SYSTEMS USE TO MON ITOR A ZONE OF FOUR-WIRE SMOKE DETECTORS, MANUAL FIRE ALARM PULL STATIONS, WATERFLOW DEVICES, OR OTHER NORMALLY OPEN DRY-CONTACT ALARM ACTIVATION DEVICES MAY ALSO BE USED TO MONITOR NORMALLY OPEN SUPERVISORY DEVICES WITH SPECIAL SUPERVISORY INDICATION AT THE CONTROL PANEL MONITORED CIRCUIT MAY BE WIRED AS AN NFPA STYLE B (CLASS B) OR STYLE D (CLASS D) EACH FMM-1 USES ONE OF THE AVAILABLE MODULE ADDRESSES ON AN SLC LOOP. IT IS RESPONDS TO REGULAR POLLS FROM THE CONTROL PANEL AND REPORTS ITS TYPE AND THE STATUS (OPEN/NORMAL/SHORT) OF ITS INITIATING DEVICE CIRCUIT (IDC) A FLASHING LED INDICATES THAT THE MODULE IS IN COMMUNICATION WITH THE CONTROL PANEL. THE LED LATCHES STEADY ON ALARM (SUBJECT TO CURRENT LIMITATIONS ON THE LOOPS) NOMINAL OPERATING VOLTAGE: 15 TO 32 VDC MAXIMUM CURREBT DRAW: 5.0 mA (LED ON) MAXIMUM OPERATING CURRENT: 375 uA (LED FLASHING) MAXIMUM IDC WIRING RESISTANCE: 1,500 ohms EOL RSISTANCE: 47K ohms TEMPERATURE RANGE: 32*F TO 120*F (O*C TO 49*C) HUMIDITY RANGE: 10% TO 93% NONCONDENSING DIMENSIONS: 4.5"HIGH X 4"WIDE X 1.25" DEEP (11.43 X 10.16 X 3.175 CM) MOUNTS TO A 4" SQUARE X 2.125" DEEP BOX (10.16 X 5.398 CM) FMM-1 MODULE MOUNT DIRECTLY TO A STANDARD 4"SQUARE X 2.125 DEEP (10.16 X 5.398 CM) ELECTRICAL BOX MAY ALSO BE MOUNTED TO THE SMB500 SURFACE MOUNT BOX MOUNTING HARDWARE AND INSTALLATION INSTRUCTION S ARE PROVIDED WITH EACH MODULE ALL WIRING MUST COMFORM TO APPLICABLE LOCAL CODES, ORDINANCES, AND REGULATIONS THESE MODULES ARE INTENDED FOR POWER LIMITED WIRING ONLY PRICE LIST $149.00 THIS ITEM IS ORIGINAL PACKAGE AND WILL BE PACKING PLEASE READ THE SHIPPING TIME..AND READ ALL THE AUCTION..DON'T BID IF YOU NOT ARE AGREE..I'M HONEST SELLER WHO WORKS VERY HARD SHIPPING TIME: YOU WILL RECEIVE THE ITEM 6-20 DAYS..ALWAYS TRIED TO SHIP FAST..SOMETIMES NEED TO WAIT... ALWAYS I WORK WITH MY CUSTOMERS,....BEFORE YOU LEAVE A NEUTRAL OR NEGATIVE FEEDBACK CONTACT WITH ME I WILL FIX THE PROBLEM. RULES IN MY AUCTIONS: 1.- THE MOST IMPORTANT FOR ME IS MY CUSTOMERS 2.- SEE THE FIRST RULE . EBAY IS VERY IMPORTANT TO ME.. .I WORK IN EBAY BECAUSE I NEED IT..I HAVE 6 KIDS AND A GRAND DAUGHTER..ALL MY INCOME WILL BE FOR SUPPORT AND EDUCATION OF MY CHILDREN.. PLEASE CONTACT WITH ME TO LET KNOW WHY, AND I WILL BE HAPPY TO DO ANYTHING I CAN TO ENSURE YOUR COMPLETE SATISFACTION. I STATED IN ALL MY AUCTION THE SHIPPING TIME, (I HAVE A DAUGHTER WITH SEIZURES CYST IN THE BRAIN, MANY TIMES I NEED TO BE WITH HER IN THE HOSPITAL..THIS IS THE REASON SOMETIMES I SHIPPING LATE.. NEVER USED OR INSTALLED..IN ORIGINAL PACKAGE...THANK YOU AND GOOD LUCK BIDDING..........My items are sold "as is" it is important to read each auction carefully and ask any and all pertinent questions prior to bidding. I'm not responsible if you did not read the auction or ask pertinent questions prior to winning. I will charge a 25% restocking fee and refund your purchase(UNOPENED ITEM)...ALL ITEMS RETURNED TO US MUST BE SHIPPED BACK TO US IN THE ORIGINAL SHIPPING CARTONS, IN ORIGINAL CONDITION OF ITEM WHEN SHIPPED FROM ME(NOT DAMAGED: MISSING HARDWARE, SCRATCHED, NICKED, DENTED ETC. DUE TO INSTALLATION) AT THE CUSTOMER'S EXPENSE, we cannot refund shipping..Refunds are credited after subtracting the restocking fee. Shipping charges are non refundable under all circumstances!... I always try to work with my customers to resolve conflicts...THE SHIPPING FREE IS ONLY FOR THE LOWER 48 STATES NOT HI, AK, AND PR(PLEASE CONTACT WITH THE SELLER)

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Notifier
Type	Monitor Module