+ Post new Ad
Nova compac chuck., US $610 – Picture 0
Nova compac chuck., US $610 – Picture 1
Nova compac chuck., US $610 – Picture 2
Nova compac chuck., US $610 – Picture 0
Nova compac chuck., US $610 – Picture 1
Nova compac chuck., US $610 – Picture 2

Nova Compac Chuck.

US $610

  • Greenville, Missouri, United States
  • Mar 27th
Open on mobile:
QR code
Used nova compact chuck. It comes with 50mm jaws. Included is slides to convert to standard 4 jaw chuck. Also included is a worm screw and tightening pins. Mounting is standard 1 inch 8 TPI

Directions

Similar products from Lathe Chucks

CUSHMAN LATHE CHUCK HARD SOLID JAWS INSIDE GRIPPING(175)

CUSHMAN LATHE CHUCK HARD SOLID JAWS INSIDE GRIPPING(175)

  • Bloomington, California, United States
  • Mar 29th
Rare Craftsman COLLET CHUCK with HOLDING COLLAR U.S.A. #9 24672

Rare Craftsman COLLET CHUCK with HOLDING COLLAR U.S.A. #9 24672

  • Dayton, Ohio, United States
  • Mar 29th
Bison (7-860-0400) 4" 3-Jaw Self-centering Rotating Chuck with morse taper shank

Bison (7-860-0400) 4" 3-Jaw Self-centering Rotating Chuck with morse taper shank

  • Cumberland City, Tennessee, United States
  • Mar 28th
CUSHMAN LATHE CHUCK HARD SOLID JAWS OUTSIDE GRIPPING(198)

CUSHMAN LATHE CHUCK HARD SOLID JAWS OUTSIDE GRIPPING(198)

  • Bloomington, California, United States
  • Mar 28th
jaws Lath Dillon Set Three

jaws Lath Dillon Set Three

  • Goshen, Indiana, United States
  • Mar 28th
Collet Nut CHUCK CLOSER Adapter Back Plate 2-3/16"-10 Thread Hardinge Haas Yuasa

Collet Nut CHUCK CLOSER Adapter Back Plate 2-3/16"-10 Thread Hardinge Haas Yuasa

  • Santa Clarita, California, United States
  • Mar 28th
Unknown machine part, for lathe?

Unknown machine part, for lathe?

  • Leicestershire, United Kingdom
  • Mar 28th
SMW WIDE SOFT TOP JAWS

SMW WIDE SOFT TOP JAWS

  • Cadiz, Kentucky, United States
  • Mar 28th
South Bend 10L Heavy 10 Shars 6" 3 Jaw Chuck 2-1/4-8 Back Plate

South Bend 10L Heavy 10 Shars 6" 3 Jaw Chuck 2-1/4-8 Back Plate

  • West Terre Haute, Indiana, United States
  • Mar 28th
MACHINIST LATHE MILL 4 Jaw 12" Cushman Lathe Chuck

MACHINIST LATHE MILL 4 Jaw 12" Cushman Lathe Chuck

  • Morris Plains, New Jersey, United States
  • Mar 28th
Manual Lathe Chucks Gibraltar Self-Centering size 10 inch 3 jaw

Manual Lathe Chucks Gibraltar Self-Centering size 10 inch 3 jaw

  • Newnan, Georgia, United States
  • Mar 27th
Lot of 2 Mastercraft Chuck Adaptors Adapters 1/4" Hex Shank QuickLoad Quick Load

Lot of 2 Mastercraft Chuck Adaptors Adapters 1/4" Hex Shank QuickLoad Quick Load

  • Citrus Heights, California, United States
  • Mar 27th
Lot of 6 Mastercraft Chuck Adaptors Adapters 1/4" Hex Shank QuickLoad Quick Load

Lot of 6 Mastercraft Chuck Adaptors Adapters 1/4" Hex Shank QuickLoad Quick Load

  • Citrus Heights, California, United States
  • Mar 27th
Huck Model 2628 Installation Tool

Huck Model 2628 Installation Tool

  • Gardendale, Alabama, United States
  • Mar 27th
Buck adjust-tru 6-jaw chuck jaws for 6" D. reverse jaws

Buck adjust-tru 6-jaw chuck jaws for 6" D. reverse jaws

  • Addison, Illinois, United States
  • Mar 27th
BUCK CHUCK - B8123 - 12" 3 JAW CHUCK

BUCK CHUCK - B8123 - 12" 3 JAW CHUCK

  • Rockford, Illinois, United States
  • Mar 27th
Drill lathe Chuck Large Mill work JM Smith Seymour Conn 5"

Drill lathe Chuck Large Mill work JM Smith Seymour Conn 5"

  • Bradenton, Florida, United States
  • Mar 27th
GIBRALTAR, 5" 3 Jaw Self Centering Rotating Chuck, 4MT, 2 Pc Jaws, Steel, /KG2/

GIBRALTAR, 5" 3 Jaw Self Centering Rotating Chuck, 4MT, 2 Pc Jaws, Steel, /KG2/

  • Saint Louis, Missouri, United States
  • Mar 26th
Solid Makita 763054-5A Chuck and Key Set Replacement 3/8-in Capacity Power Tool

Solid Makita 763054-5A Chuck and Key Set Replacement 3/8-in Capacity Power Tool

  • United States
  • Mar 26th
KITAGAWA HYDRAULIC ACTUATOR S1243-01B Okuma With Drawl Bar 90 Day Warranty

KITAGAWA HYDRAULIC ACTUATOR S1243-01B Okuma With Drawl Bar 90 Day Warranty

  • Rolla, Missouri, United States
  • Mar 26th

People who viewed this item also vieved

PAIR OF HEAVY DUTY BALL BEARING LIVE CENTERS 5MT SHANK

PAIR OF HEAVY DUTY BALL BEARING LIVE CENTERS 5MT SHANK

  • Ellington, New York, United States
  • Jan 30th
Lot of 8 Machinists Lathe Tooling Toolholder Live Center Morse Taper Armstrong

Lot of 8 Machinists Lathe Tooling Toolholder Live Center Morse Taper Armstrong

  • Saint Louis, Missouri, United States
  • Jan 30th
Unimat lathe wood box, manual, and other misc paperwork.

Unimat lathe wood box, manual, and other misc paperwork.

  • Newton, Kansas, United States
  • Jan 30th
T Slot Bolts 1/2"-13

T Slot Bolts 1/2"-13

  • Indiana, Pennsylvania, United States
  • Jan 30th
Wilton 10" Spark-Duty Hi-Vis C-Clamps ~ Model: 410CS (Pair!)

Wilton 10" Spark-Duty Hi-Vis C-Clamps ~ Model: 410CS (Pair!)

  • Auburn, Washington, United States
  • Jan 30th
Starrett #93A T-handle Tap Wrench W/Box:

Starrett #93A T-handle Tap Wrench W/Box:

  • Glastonbury, Connecticut, United States
  • Jan 30th
Hardinge 1-5/8" Greenlee 57/64" Serrated Collet

Hardinge 1-5/8" Greenlee 57/64" Serrated Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Hardinge 2-5/8" Cone 2.234" Serrated Collet

Hardinge 2-5/8" Cone 2.234" Serrated Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
5/8" Square Collet, Nardco 1129-1005

5/8" Square Collet, Nardco 1129-1005

  • Hendersonville, Tennessee, United States
  • Jan 30th
ADJUSTABLE ANGLE PLATES WORM GEAR ADJ 5X7

ADJUSTABLE ANGLE PLATES WORM GEAR ADJ 5X7

  • New Castle, Pennsylvania, United States
  • Jan 30th
PRECISION GROUND ANGLE PLATES 2X2X2 ACC .0005" -2 FACES

PRECISION GROUND ANGLE PLATES 2X2X2 ACC .0005" -2 FACES

  • New Castle, Pennsylvania, United States
  • Jan 30th
COMPACT MACHINE SLIDE TABLE

COMPACT MACHINE SLIDE TABLE

  • New Castle, Pennsylvania, United States
  • Jan 30th
Machinist Hand Vise Made in USA Vintage tool file holder grinding tooling bit

Machinist Hand Vise Made in USA Vintage tool file holder grinding tooling bit

  • Windsor, Virginia, United States
  • Jan 30th
Eagle Rock Technologies A1-21200 5C AIR COLLET FIXTURE PN #09148255 USED

Eagle Rock Technologies A1-21200 5C AIR COLLET FIXTURE PN #09148255 USED

  • Gilbert, Arizona, United States
  • Jan 30th
Starrett 2" Vise #160 a perfect pair

Starrett 2" Vise #160 a perfect pair

  • Hopatcong, New Jersey, United States
  • Jan 30th
Lantern style Tool Post Holder lathe mill machinist toolmakers tools

Lantern style Tool Post Holder lathe mill machinist toolmakers tools

  • Reynoldsburg, Ohio, United States
  • Feb 13th
LOT OF SIX BRASS BUSHINGS 1" X 3/4" O D X 1/2" OD

LOT OF SIX BRASS BUSHINGS 1" X 3/4" O D X 1/2" OD

  • Washington, North Carolina, United States
  • Feb 13th
STARRETT EDGE FINDER NO 827B w/ CASE

STARRETT EDGE FINDER NO 827B w/ CASE

  • Temecula, California, United States
  • Feb 13th
MACHINIST TOOLS LATHE MILL 2 Micro V Blocks and Clamps for Sherline Unimat

MACHINIST TOOLS LATHE MILL 2 Micro V Blocks and Clamps for Sherline Unimat

  • Morris Plains, New Jersey, United States
  • Mar 10th
MACHINIST LATHE MILL Machinist Lot Of Gages Cutters Jaws Parts Etc

MACHINIST LATHE MILL Machinist Lot Of Gages Cutters Jaws Parts Etc

  • Morris Plains, New Jersey, United States
  • Mar 10th
MACHINIST TOOLS LATHE MILL Lot of Micro Set Up Hold Down Blocks for Sherline

MACHINIST TOOLS LATHE MILL Lot of Micro Set Up Hold Down Blocks for Sherline

  • Morris Plains, New Jersey, United States
  • Mar 10th
PRECISION 12" HORIZONTAL VERTICAL ROTARY TABLE FOR CNC VMC MILL

PRECISION 12" HORIZONTAL VERTICAL ROTARY TABLE FOR CNC VMC MILL

  • Covina, California, United States
  • Mar 27th
BRIDGEPORT 15" HORIZONTAL ROTARY TABLE model RT-15 made in USA

BRIDGEPORT 15" HORIZONTAL ROTARY TABLE model RT-15 made in USA

  • Chatsworth, California, United States
  • Mar 27th
LIANG YU (TAIWAN) 15" HORIZONTAL ROTARY TABLE (BRIDGEPORT RT-15 copy)

LIANG YU (TAIWAN) 15" HORIZONTAL ROTARY TABLE (BRIDGEPORT RT-15 copy)

  • Chatsworth, California, United States
  • Mar 27th
COLLET CHUCK FOR ER-32 (80MM DIAMETER.) (3901-5032)

COLLET CHUCK FOR ER-32 (80MM DIAMETER.) (3901-5032)

  • Chino, California, United States
  • Mar 28th
Kennametal Tool Holder with Inserts

Kennametal Tool Holder with Inserts

  • Mount Vernon, Georgia, United States
  • Mar 29th
HARDINGE LATHE 5C COLLET DRAW TUBE DV-59 DSM-59 11" loa nice condition

HARDINGE LATHE 5C COLLET DRAW TUBE DV-59 DSM-59 11" loa nice condition

  • Niagara Falls, New York, United States
  • Mar 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies