+ Post new Ad
OEM Puller and Saw combo, US $14,999.00 – Picture 0
OEM Puller and Saw combo, US $14,999.00 – Picture 1
OEM Puller and Saw combo, US $14,999.00 – Picture 2
OEM Puller and Saw combo, US $14,999.00 – Picture 3
OEM Puller and Saw combo, US $14,999.00 – Picture 4
OEM Puller and Saw combo, US $14,999.00 – Picture 5
OEM Puller and Saw combo, US $14,999.00 – Picture 0
OEM Puller and Saw combo, US $14,999.00 – Picture 1
OEM Puller and Saw combo, US $14,999.00 – Picture 2
OEM Puller and Saw combo, US $14,999.00 – Picture 3
OEM Puller and Saw combo, US $14,999.00 – Picture 4
OEM Puller and Saw combo, US $14,999.00 – Picture 5

Oem Puller And Saw Combo

US $14,999.00

  • Biddeford, Maine, United States
  • Jan 30th
Open on mobile:
QR code
Both the saw and the puller are in working condition and need a saw blade, air, and power hooked up to them. We took these out of service as we are going with a smaller puller and saw as this was way overkill for our process. They take up a lot of floor space collecting dust here so they are priced to move. Shipping is FOB our plant.  The saw is an OEM branded saw with a max cut width of 12" and height of 6". The blade comes up from the bottom and gets the cut signal from the puller, also has a manual cut button for samples and cuttting around scrap. The lengths that you want cut are typed in and set, accurate down to 1/16". The saw blade isn't included but it does take a 16" blade. A chip collector is also included with the saw.  The puller is cleated and is 8' long and 8.5" wide. Entrance and exit openings are 12' by 10". All cleats are intact and still malleable and non-marring. It has upstream and downstream float controls to avoid crushing your part with adjustable air valves. It's speed is controlled by manual input and a servo on both the top and bottom puller halves. The saw length is set by the puller. 
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Used with a few nicks in the paint but in working condition. Was pulled from production 5/2014 when we downsized, this puller was overkill for our process.”

Directions

Similar products from Other Plastic Processing Tools

5X5 Rotocast Machine Rotocaster Rotational Casting Rotomolder Hollow Casting

5X5 Rotocast Machine Rotocaster Rotational Casting Rotomolder Hollow Casting

  • Orlando, Florida, United States
  • Jan 30th
I3 prusa rework 3d printer ABS printed parts kit GREEN

I3 prusa rework 3d printer ABS printed parts kit GREEN

  • corfu, corfu, Greece
  • Jan 30th
Makerbot Replicator 2X 3D printer FINAL PRICE

Makerbot Replicator 2X 3D printer FINAL PRICE

  • Houston, Texas, United States
  • Jan 30th
Wade extruder reprap 3d printer prusa mendel high quality

Wade extruder reprap 3d printer prusa mendel high quality

  • Arnold, Missouri, United States
  • Jan 30th
NEW ROTFIL UTXS010261 CARTRIDGE HEATER ELEMENT 110V-AC 200W 3-11/16IN D366462

NEW ROTFIL UTXS010261 CARTRIDGE HEATER ELEMENT 110V-AC 200W 3-11/16IN D366462

  • Delta, Ohio, United States
  • Jan 30th
NEW FAST HEAT CH020761 HEATER CARTRIDGE ELEMENT 120V-AC 3IN 300W D414416

NEW FAST HEAT CH020761 HEATER CARTRIDGE ELEMENT 120V-AC 3IN 300W D414416

  • Delta, Ohio, United States
  • Jan 30th
Nylon linear bushings bearings Taulman 618 delta printer 3d reprap lm8uu rostock

Nylon linear bushings bearings Taulman 618 delta printer 3d reprap lm8uu rostock

  • Minneapolis, Minnesota, United States
  • Jan 30th
5PCS 3D Printer 0.4mm Extruder Nozzle Print Head for MK8 Makerbot RepRap

5PCS 3D Printer 0.4mm Extruder Nozzle Print Head for MK8 Makerbot RepRap

  • ???, ???, China
  • Jan 30th
Alpine HS50S 50mm Extruder

Alpine HS50S 50mm Extruder

  • Spartanburg, South Carolina, United States
  • Jan 30th
Chen Hsong 2008 Plastic injection molding machine 88 ton clamp force modle JM 88

Chen Hsong 2008 Plastic injection molding machine 88 ton clamp force modle JM 88

  • GuangDong, China
  • Jan 30th
PEPPERL + FUCHS CONTROL CIRCUIT MODEL K-SERIE # KHD2-SS1/Ex2

PEPPERL + FUCHS CONTROL CIRCUIT MODEL K-SERIE # KHD2-SS1/Ex2

  • Kenilworth, New Jersey, United States
  • Jan 30th
BANNER ENGINEERING MINI BEAM EXPERT: SME312FPBQD

BANNER ENGINEERING MINI BEAM EXPERT: SME312FPBQD

  • Kenilworth, New Jersey, United States
  • Jan 30th
SICK MVE 1-150 RELAY

SICK MVE 1-150 RELAY

  • Kenilworth, New Jersey, United States
  • Jan 30th
OPTIMATE OP-500 OPERATOR TERMINAL

OPTIMATE OP-500 OPERATOR TERMINAL

  • Kenilworth, New Jersey, United States
  • Jan 30th
Stratasys FDM 8000 3d printer

Stratasys FDM 8000 3d printer

  • Cincinnati, Ohio, United States
  • Jan 30th
plastics extruder hpm prodex 40hp 24:1

plastics extruder hpm prodex 40hp 24:1

  • United States
  • Jan 30th
NEW FAST HEAT CH024836LA HEATER CARTRIDGE ELEMENT 115V-AC 4X5/8IN 200W D367473

NEW FAST HEAT CH024836LA HEATER CARTRIDGE ELEMENT 115V-AC 4X5/8IN 200W D367473

  • Delta, Ohio, United States
  • Jan 30th
NEW KJT 255666 HEATER CARTRIDGE 230V-AC 13-3/8IN 500W D367513

NEW KJT 255666 HEATER CARTRIDGE 230V-AC 13-3/8IN 500W D367513

  • Delta, Ohio, United States
  • Jan 30th
8 Stratasys SR-20 support material cartridge 310-30500

8 Stratasys SR-20 support material cartridge 310-30500

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
4 Stratasys ABS- M30 material cartridge 310-20000 Fortus

4 Stratasys ABS- M30 material cartridge 310-20000 Fortus

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Big Chief BC57219A Band Heater 240V 1000W 3" D 5" L (12851)

Big Chief BC57219A Band Heater 240V 1000W 3" D 5" L (12851)

  • Melrose Park, Illinois, United States
  • Jun 14th
Foster FJT 300 Series FS318P Quick Coupler Injection Mold Coolant water line 1/2

Foster FJT 300 Series FS318P Quick Coupler Injection Mold Coolant water line 1/2

  • Algonquin, Illinois, United States
  • Jun 14th
Cincinnati Milacron 111 oz 27-1 Barrier Screw #10492511 ser 206884 New in Crate

Cincinnati Milacron 111 oz 27-1 Barrier Screw #10492511 ser 206884 New in Crate

  • Machesney Park, Illinois, United States
  • Jun 14th
Used INJECTION MOLDING SCREW 3.23" Screw Threads, 2.9" Spline

Used INJECTION MOLDING SCREW 3.23" Screw Threads, 2.9" Spline

  • Junction City, Kentucky, United States
  • Jun 14th
New or Manufacturer Rebuilt INJECTION MOLDING SCREW 109.5" Long, 8" Diameter

New or Manufacturer Rebuilt INJECTION MOLDING SCREW 109.5" Long, 8" Diameter

  • Junction City, Kentucky, United States
  • Jun 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies