US $135.00
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Country/Region of Manufacture | Japan |
Model | Okuma No.5 Rolling Center (New In Box) | ||
Brand | Okuma |
Directions
Similar products from Live Centers
Royal Products 10665 5 MT Quad-Bearing Live Center With CNC Point USED
MACHINIST LATHE MILL TOOLS CENTER BITS & Punch 5pc
TWO (2) NEW UNUSED MT2 60 DEGREE DEAD CENTER TOOL 4 SOUTH BEND ATLAS LATHE
NEW UNUSED MT1 LIVE CENTER ATLAS CRAFTSMAN 6" LATHE MACHINIST TOOL
SOUTH BEND SFP-100NK 5-1/8" FACEPLATE 1-1/2"-8 THREAD 9" & 10K LATHE DOG PLATE
PRESICION BALL BEARING LIVE CENTER W/ 5MT SHANK + NEW BISON DEAD CENTER
Grizzly Industrial MT2-1 Live Center - Machinist tools Lathe Milling
Vintage new MT.no.1 Live Center Centers #1
SFJ POWERHOLD RV-3 LIVE CENTER with #3MT shank
ROYAL PRODUCTS SUPER DUAL BEARING LIVE CENTER - with 4MT shank
USED, ENCO, MT 4 LIVE CENTER,WITH INTERCHANGEABLE ENDS, MORSE TAPER SET
Lathe Tooling #3 Morse Taper, Centers and Sleeve
HUGE Lathe Live Center, Motor Tool Detroit # EL-500, #5 Morse Taper, Smooth Op
3 MT DEAD CENTER, MORSE TAPER, EXCELLENT CONDITION
2 MT CUP CENTER CENTER, MORSE TAPER, MISSING THE CENTER PIN
2 MT PAD or SCREW CENTER, MORSE TAPER
People who viewed this item also vieved
ELECTRO Magnetec Chuck/ YUASA-- HORZ. ROTATING
6.3" Fully Machined Threaded Back Plate with 1-1/2 x 8 TPI for 3 or 4 NEW!
Quickly Holding U Shaped Bar Horizontal Toggle Clamp 20Kg 44Lbs KL-20400
U Shaped Bar Fangle Base Vertical Toggle Clamp 90Kg 200 Lbs PC 12050U 2 Pcs
201A 27Kg 60Lbs 90 Degree Bar Open Angle Capacity Horizontal Toggle Clamp
Hardinge 5-C Collet 11/64" Diameter, with Internal Threads
MACHINIST LATHE MILL Lot of Hardinge 4C Collets CLEAN
BIG LOT NEW!! KENNAMETAL & LYNDEX COLLETS DA100
PrecisionER16ColletChuckCAT40DrawBarThread5/8-11CNCTool
Applied Robotics Plate Adapter XC50SGT-16-5N-NP-S680
SHARS HEAVY DUTY END MILL GRINDING GRIND FIXTURE 5C COLLET NEW
Bridgeport Mill Vise Swivel Base
KURT SWIVEL BASE For 6" ANGLOCK VISE FITS Model D60, D675, D688 Made in USA
Starrett 4" ATHOL Bench Vise 924 Vintage
ARMSTRONG LATHE TOOL HOLDERS WITH CARBIDE-TIPPED CUTTERS
14"x18.375"x.5" Steel Work Holding Workholding Layout Table Plate 3/8"-16
SPI Adjustable Parallel Set of 4 Sizes 3/8" to 2-1/4"
New Adjustable Parallel Set 3/8" to 1/2" thru 1-3/4" to 2-1/4" w/ Sleeve
Starrett 568C V Block and Clamp 2 pair
3" Inches (75 mm ) Mini Precision Rotary Table for Milling Machines
Vintage Palmgren 8" Cross Slide Rotary Table / Made in the USA
Best Quality 4" Mini Rotary Table - Milling Machines -Brand New Tools And Parts
Clarkson Autolock Type "S" Chuck for Cutters with metal box and 1 Collet
Nikken HSK63A-C1.1/4-110, HSK63A-C1 1/4-110 Milling Chuck. lot#3
Universal Engineering Acura-Grip #911886 Collet Chuck with 21 Collets
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies